彭立明上海交通大学教授轻合金精密成型工程专家

专家信息：

彭立明，男，1972年6月出生，重庆人，博士。现任上海交通大学材料科学与工程学院轻合金精密成型工程中心副主任，教授、硕士生导师。

教育及工作经历：

1990.09-1994.09 上海交通大学材料工程系获得学士学位

1994.09-1997.03 西北工业大学材料学院获得硕士学位

1997.03-2000.10 上海大学获得工学博士

2000.10-2002.10 上海交通大学材料科学与工程博士后流动站作研究工作

2002.11-2004.08 上海交通大学材料学院讲师

2004.09-2010.09 上海交通大学材料学院副教授（其中2005.01-2005.06，于澳大利亚著名大学---monash大学做访问学者；2010.08-2010.10，美国通用汽车公司研发中心访问科学家）

2010.10-2016.12上海交通大学材料学院教授

2017.01-2019.06 上海交通大学材料学院长聘教授

2019.07-至今上海交通大学材料学院特聘教授

社会任职：

1．国际材料学会会员美国TMS年会镁分会组委会成员。

2．中国铸造标准委员会委员。

3．Elsiver学术期刊特约审稿人教育部学位与研究生教育评估专家。

4．世界铸造组织非铁合金委员会委员。

5．中国青年科技工作者协会第五届会员。

6．美国TMS年会镁分会组委会成员。

7．中国铸造标准委员会委员。

8． Elsiver学术期刊特约审稿人。

9．教育部学位与研究生教育评估专家。

教学情况：

主讲课程：

《计算材料工程》（本科生）

《材料加工过程中的传输现象》（研究生）

《秘宝寻材-宝藏中的材料科学》（核心通识课）

培养研究生情况：

毕业博士生数: 5

毕业硕士生数: 12

科学研究：

研究方向：

主要从事于高性能镁合金强韧化设计及其电子显微学研究、镁合金高温氧化特性与防护、镁合金的多场协同热处理及其机理、镁合金的液态成型技术等方向研究。

1、高性能轻合金材料设计与精密成型技术

2、镁基氢致变色功能薄膜材料与器件

承担科研项目情况：

先后承担或参与了安全973、863重点、国际合作重点等二十余项重要研究项目或课题。

1．国家自然科学基金项目：含S气氛对镁熔体的阻燃性及其环境协调性研究，2002。

2．上海市青年科技启明星计划项目：摩擦搅拌制备镁稀土变形合金的组织细化与强韧化机制研究，2010。

3．国家”863”计划创新团队项目：镁合金发动机关键材料与系统集成，2009-2011。

4．国家自然基金面上项目：Mg-RE-Zn系镁合金析出相与LPSO结构及其强韧化机制研究，2010-2012)。

5．美国通用汽车公司与上海交通大学合作项目：Development of Magnesium Alloy Engine Blocks (phase II)，2010-2011。

6．美国波音公司与上海交通大学合作项目：Development and Manufacturing of High Strength and corrosion resistant cast Mg alloys and parts，2010-2011。

7．美国通用汽车公司与上海交通大学合作项目：Alloy and Process Development for Cast Magnesium Wheels，2009-2010。

8．上海市自然科学基金重点项目：结构-功能一体化镁基复合材料的基础研究，2009-2011。

9．西北有色研究院与上海交通大学合作项目：光学仪器阻尼减振材料，2007-2009。

研究情况：

长期从事高强度铸造轻合金（镁合金/铝合金）材料研发与液态精密成型及特种加工技术研究，近年来还开拓了氢致变色镁基功能薄膜材料与器件、镁合金增材制造技术等新兴学科方向，并取得较为显著的研究进展：1) 在高性能镁-稀土合金的设计、强化机制与组织调控研究取得突破,探明多种镁稀土合金中的析出序列与相变模型以及强韧化机制，为新型高性能镁合金设计打下理论基础；2) 针对镁室温滑移系少塑性差的问题，发现了镁合金中微量元素促进室温非基面滑移开动的机制，创制了高强高延性镁合金JDM1（强度超过300MPa，延伸率达到35%以上）；针对传统镁合金强度低的问题，探明镁-重稀土合金的析出序列并发现了新的有效强化相β1，从而创制了超高强度耐高温镁-稀土合金JDM2（将其强度提升至500MPa，使用温度提升至300℃）；3) 发明了双联式精密低压铸造、发动机支架挤压铸造等多种轻合金精密液态成型技术，并将新材料与工艺相结合，解决了20种复杂高性能要求的汽车与国防关重件的轻量化制造难题; 4）在世界上首次实现了高强度镁稀土合金粉体有气雾化制备和镁稀土合金样品的增材制造；5）设计并制备出了可见光透射率调节区间在达65%的(CF)n/Pd/Mg-Nb2O5氢致变色薄膜。

高度重视产-学-研结合与科技成果转化，已将10余项镁、铝合金科研成果或专利在多家企业进行工程化或产业化，为企业创造经济效益超过1亿元。广泛开展国际科研合作，形成了良好的国际影响力，参与筹建了“上海交大-通用汽车先进材料制造联合实验室（SJTU-GM AMP CRL）”，该研究室是美国通用汽车公司在亚洲建立的唯一的联合实验室，并受邀担任了该实验室“镁合金领域”负责人。获得国家及省部级科研奖励12 项,发表SCI论文230篇(Scopus总他引超3600次，H index=32)，获得授权专利35项。

制定标准：

1 铸造镁合金现行 GB/T 1177-2018 2018-08-15 国家标准

2 镁合金铸件现行 GB/T 13820-2018 2018-08-15 国家标准

3 铸造有色金属及其合金牌号表示方法现行 GB/T 8063-2017 2018-02-27 国家标准

4 变形镁及镁合金牌号和化学成分现行 GB/T 5153-2016 2017-08-31 国家标准

5 镁合金加工产品包装、标志、运输、贮存现行 GB/T 32792-2016 2017-08-31 国家标准

6 铸造镁合金锭现行 GB/T 19078-2016 2017-08-31 国家标准

7 汽车车轮用铸造镁合金现行 GB/T 26654-2011 2012-04-05 国家标准

8 镁合金汽车车轮铸件现行 GB/T 26649-2011 2012-04-05 国家标准

9 摩托车和电动自行车用镁合金车轮铸件现行 GB/T 26650-2011 2012-04-05 国家标准

科研成果：

1． A.A.Luo,A.K. Sachdev, P.H Fu, L.M.Peng, H.Y,Jiang,et al. Low pressure die casting of AZ91D and AM50 Magnesium alloys. CastExpo'08 and the 112th Metalcasting Congress by AFS and NADCA, May 17-20, 2008, Atlanta, GA, USA, AFS Best Paper Award.

2．耐热镁合金及其在汽车上的应用研究丁文江; 卢晨; 袁广银; 王渠东; 吴国华; 曾小勤; 郭兴伍; 彭立明; 蒋海燕; 董杰【科技成果】上海交通大学 2005-12-28

3．镁稀土类合金精炼熔剂及其生产方法吴国华; 丁文江; 高洪涛; 彭立明; 曾小勤【科技成果】上海交通大学 2005-12-28

4．电站用干式绝缘容器制造技术的开发及产业化丁文江; 翟春泉; 蒋海燕; 曾小勤; 徐小平; 卢晨; 刘六法; 花传平; 郭兴伍; 朱燕萍; 曾键; 姚真裔; 卢大; 王渠东; 袁广银; 彭立明; 吴国华; 于彦东; 卫中山; 董杰【科技成果】上海交通大学 2004-12-04

5．轿车用镁合金轮毂精密成型技术开发丁文江; 曾小勤; 彭立明; 卢晨; 翟春泉; 徐小平; 郭兴伍; 吴国华; 王渠东; 花传平; 朱燕萍; 卢大; 蒋海燕; 袁广银; 黄晓锋【科技成果】上海交通大学 2002-10-29

6．绿色无污染铝合金复合精变处理工艺毛协民; 唐多光; 程其明; 王海江; 李金辉; 王丰浩; 彭立明; 邵敏华; 侯旭【科技成果】上海大学 2001-01-01

发明专利：

代表性授权专利：

[1]彭立明、付彭怀、蒋海燕等，多组分气体混合装置，ZL200610027174.2

[2]丁文江、彭立明、付彭怀等，含稀土高强度铸造镁合金及其制备工艺，ZL200510030457.8

[3] 何上明、曾小勤、彭立明等，高强度耐热镁合金及其制备方法，ZL200510025251.6

[4] 张亮、彭立明、王迎新，丁文江、匡建中，镁合金金属型低压铸造涂料及其制备方法，ZL200810202635.4

[5] 彭立明、王迎新、蒋海燕、丁文江，具有自动气体保护装置的镁合金金属型低压铸造型腔，ZL200910049409.1

[6] 吴国华、丁文江、彭立明，镁熔体净化装置，ZL200910048993.9

[7] 王迎新、彭立明、付彭怀、蒋海燕、丁文江，镁合金熔炼的锆复合饼及其制备方法，ZL201010151425.4

[8] 王迎新、彭立明、蒋海燕、丁文江，用于高速挤压的变形镁合金及其制备方法，ZL201010152389.3

[9] 胡斌、彭立明、曾小勤，基于镁基合金的摩托车发动机缸套的制备方法，ZL201010292160.X

[10] 彭立明、郑飞燕、付彭怀、沈渊明，利用植物灰分制备Mg/Mg2Si 复合材料的方法，ZL201310146299.7

[11] 孙明、彭立明、胡小禹、付彭怀、彭颖红、丁文江，采用钕铁硼磁铁废料制备镁钕中间合金的方法，ZL201310577466.3

[12] 吴玉娟、彭立明、张宇、容伟、付彭怀，丁文江，一种含xx和xx的铸造镁合金及其制备方法，ZL201418000087.3

[13] 彭立明、王成琪、郑飞燕、李学文，两片式轮毂的连接方法，ZL201410116433.3

[14] 吴玉娟、都亚仙、彭立明、孙明、郑飞燕、陈娟、曾小勤、丁文江，具有LPSO结构的铸态Mg-Gd-Zn-(Zr)合金制备方法，ZL201410668925.3

[15] 陈娟、廖海光、韩靖宇、彭立明、郑飞燕、吴玉娟、刘越、易轰、丁文江，一种原位制备含硼镁基复合材料的方法，ZL201610693513.4

发明公开：

[1]付彭怀,王迎新,林金铭,唐伟能,郑亚,王科,彭立明,胡勇,刘保良,丁文江. 镁合金轮毂旋压毛坯重力铸造成型方法[P]. 上海市：CN116020979A,2023-04-28.

[2]彭立明,兰乔,汪星辰,刘保良,孙启才,袁灵洋. 预测铸态铝硅合金力学性能的方法及系统[P]. 上海市：CN115985416A,2023-04-18.

[3]郭兴伍,高晨璟,聂乐文,吴轩,彭立明. 一种在WO-3薄膜上负载贵金属催化剂纳米颗粒的方法[P]. 上海市：CN115672320A,2023-02-03.

[4]付彭怀,王嘉诚,林金铭,胡国琦,鲍明东,袁灵洋,彭立明. 一种高强韧压铸镁合金及其制备方法[P]. 上海市：CN115652159A,2023-01-31.

[5]吴玉娟,陈凯,彭立明,武千业,刘子翼,邓庆琛,宿宁,常治宇,丁晨阳,丁文江. 基于高通量混粉-送粉-打印增材制造的合金制备方法[P]. 上海市：CN115090897A,2022-09-23.

[6]付彭怀,王迎新,林金铭,彭立明,丁文江. 一种可快速高温固溶处理的高强韧铸造镁稀土合金及其制备方法[P]. 上海市：CN114686711A,2022-07-01.

[7]付彭怀,丁之光,刘兵银,朱荣玉,彭立明,丁文江. 一种储氢镁合金及其制备方法[P]. 上海市：CN114645168A,2022-06-21.

[8]付彭怀,林金铭,王迎新,彭立明,丁文江. 一种高强韧铸造镁稀土合金及其制备方法[P]. 上海市：CN114645169A,2022-06-21.

[9]付彭怀,王迎新,郑亚,林金铭,唐伟能,王科,胡勇,彭立明,祁卫东,丁文江. 一种可快速高温固溶处理的铸造镁稀土合金及其制备方法[P]. 上海市：CN114645170A,2022-06-21.

[10]付彭怀,王迎新,彭立明,林金铭,丁文江. 一种高强韧铸造镁稀土合金及其制备方法[P]. 上海市：CN114635068A,2022-06-17.

[11]彭立明,袁灵洋,杨磊,肖刚,杨超. 一种非热处理强化高强高韧压铸铝硅合金及其制备方法[P]. 上海市：CN114411020A,2022-04-29.

[12]付彭怀,徐雯钰,朱荣玉,肖刚,彭立明,丁文江. 一种储氢镁合金及其制备方法[P]. 上海市：CN113789462A,2021-12-14.

[13]丁之光,付彭怀,朱荣玉,肖刚,彭立明,丁文江. 一种储氢镁合金的制备方法[P]. 上海市：CN113695536A,2021-11-26.

[14]彭立明. 一种防水无纺布材料及其生产工艺[P]. 福建省：CN113638129A,2021-11-12.

[15]付彭怀,刘保良,胡国琦,鲍明东,赵斌元,郑飞燕,彭立明,丁文江. 一种铝/镁合金真空压铸成型方法及装置[P]. 上海市：CN113523223A,2021-10-22.

[16]吴玉娟,武千业,邓庆琛,薛艳婷,陈凯,常治宇,宿宁,彭立明,丁文江. 选区激光熔化技术制备高模量高强度镁基复合材料的方法[P]. 上海市：CN113528877A,2021-10-22.

[17]吴玉娟,薛艳婷,邓庆琛,武千业,陈凯,常治宇,宿宁,彭立明,丁文江. 一种含稀土耐热高强镁合金材料及其制备方法[P]. 上海市：CN113528916A,2021-10-22.

[18]陈娟,金启豪,彭立明,阎熙,李子言,吴玉娟,付彭怀. 一种金属异种材料搅拌摩擦焊接头及制备和提升接头强度的方法[P]. 上海市：CN113500285A,2021-10-15.

[19]徐雯钰,付彭怀,刘大志,陈娟,吴玉娟,彭立明,丁文江. 提高激光选区熔化增材制造镁/镁合金零件致密度的方法[P]. 上海市：CN113414406A,2021-09-21.

[20]方浩澜,陈娟,彭立明,刘峻嘉,申炜,王廷炎,陈炎,崔元勋,董泽麟,管颖添,邓南香,丁文江. 氟碳/钯/镁-钪氢致变色薄膜及其制备方法[P]. 上海市：CN113215544A,2021-08-06.

[21]彭寿,王伟,陈娟,周文彩,齐帅,于浩,曾红杰,彭立明,邓南香,陈炎. 一种太阳能电池板的制备方法[P]. 上海市：CN112951944A,2021-06-11.

[22]彭寿,王伟,陈娟,周文彩,齐帅,于浩,曾红杰,彭立明,邓南香,陈炎. 一种太阳能电池板及其用途[P]. 上海市：CN112864263A,2021-05-28.

[23]彭立明,兰乔,刘保良,常治宇,袁灵洋,吴玉娟,潘泽明. 一种外露加热式升液管[P]. 上海市：CN112743063A,2021-05-04.

[24]彭立明,兰乔,刘保良,常治宇,袁灵洋,吴玉娟. 一种用于翻转定向冷却铸造成型装置的模具系统[P]. 上海市：CN112743065A,2021-05-04.

[25]陈娟,陈炎,彭立明,邓南香,吴玉娟,董泽麟,王廷炎,丁文江. 碳氟/钯/镁-钌气致调光薄膜及其制备方法[P]. 上海市：CN112596279A,2021-04-02.

[26]吴玉娟,常治宇,彭立明,刘保良,兰乔,宿宁,邓庆琛,薛晓瑜,武千叶,薛艳婷,丁文江. 硼酸铝晶须增强稀土镁合金复合材料及其制备方法[P]. 上海市：CN112410688A,2021-02-26.

[27]郑飞燕,彭立明,付彭怀,胡志恒,李波涛,徐海舟. 提高压铸件表面局部硬度和耐磨性的方法及轻合金压铸件[P]. 上海市：CN111996535A,2020-11-27.

[28]朱永,刘晓春,黄巧生,彭立明,郑飞燕,韩盼文. 工件落座气检系统有效性检验系统和方法[P]. 上海市：CN111854653A,2020-10-30.

[29]郑飞燕,方浩澜,彭立明,刘保良,付彭怀,吴玉娟,陈娟. 铸件缺陷修复装置与方法[P]. 上海市：CN111347155A,2020-06-30.

[30]陈娟,阎熙,彭立明,金启豪,吴玉娟,袁灵洋. 一种基于铝中间层的镁/钢异种材料搅拌摩擦焊搭接方法[P]. 上海市：CN111299803A,2020-06-19.

[31]范鹏,付彭怀,郑飞燕,彭立明. 一种铝/镁合金半固态浆料原位制备与成型方法及装置[P]. 上海市：CN111069566A,2020-04-28.

[32]郭兴伍,叶恩,聂乐文,高晨璟,彭立明. 在镁合金表面用氩离子刻蚀制备高耐腐蚀Al薄膜的方法[P]. 上海市：CN111020505A,2020-04-17.

[33]付彭怀,倪航,王南清,王飞,蒋强,王迎新,彭立明,丁文江. 一种铸造过程中镁合金熔体的保护方法[P]. 上海市：CN110860675A,2020-03-06.

[34]吴玉娟,邓庆琛,彭立明,罗远航,宿宁,常治宇,薛晓瑜. 选区激光熔化增材制造技术制备高强韧镁稀土合金的方法[P]. 上海市：CN110681869A,2020-01-14.

[35]郭兴伍,高晨璟,聂乐文,彭立明. 在ITO玻璃表面制备纳米结构WO_3薄膜的方法[P]. 上海市：CN110510890A,2019-11-29.

[36]王南清,付彭怀,廖海光,陈娟,彭立明. 基于激光选区熔化(SLM)增材制造技术的多孔镁稀土合金植入物的制备方法[P]. 上海市：CN110394447A,2019-11-01.

[37]付彭怀,彭立明,王科,王迎新,丁文江. 一种适合镁及镁合金熔炼与铸造的方法[P]. 上海市：CN110373559A,2019-10-25.

[38]彭立明,兰乔,刘保良,袁灵洋,吴玉娟,付彭怀. 一种翻转定向冷却铸造成型系统及其使用方法[P]. 上海市：CN110202120A,2019-09-06.

[39]彭立明,兰乔,刘保良,袁灵洋,吴玉娟,付彭怀. 利用双冷却条件获得细小二次枝晶臂间距的合金铸造方法[P]. 上海市：CN110202121A,2019-09-06.

[40]王科,付彭怀,彭立明,王迎新. 一种镁、铝合金铸件凝固过程中热裂纹的预测方法[P]. 上海市：CN110111861A,2019-08-09.

[41]彭立明,袁灵洋,郑飞燕,陆珂伟,周定贤,陈海平,杨小亮. 一种非热处理强化高强高韧压铸铝镁铜合金及其制备方法[P]. 上海市：CN110079714A,2019-08-02.

[42]彭立明,韩盼文,袁灵洋,郑飞燕,徐宏,胡志恒,应伟勇. 一种高强韧压铸铝合金及其制备方法[P]. 上海市：CN109881056A,2019-06-14.

[43]陈娟,邓南香,彭立明,刘越,吴玉娟,丁文江. 一种镁基合金调制薄膜及其制备方法和应用[P]. 上海市：CN109881169A,2019-06-14.

[44]宋书清,阮博经,高书娟,李永红,马黎波,陈娟,彭立明,丁文江,洪仁杰. 一种亚微米级NdFeB合金粉的生产方法[P]. 江苏省：CN109692968A,2019-04-30.

[45]宋书清,陈娟,高书娟,阮博经,马黎波,李永红,蔡俊,丁文江,彭立明. 一种利用蒸发-冷凝法和还原法生产镍基超细高温合金粉的方法[P]. 江苏省：CN109648094A,2019-04-19.

[46]付彭怀,周逸源,彭立明,王迎新,易磊,丁文江. 一种含铈稀土镁合金及其热处理方法[P]. 上海市：CN109295369A,2019-02-01.

[47]陈娟,刘越,彭立明,邓南香,吴玉娟,韩靖宇,阎熙,丁文江. 氟碳/钯/镁-五氧化二铌气致调光薄膜及其制备方法[P]. 上海市：CN109136841A,2019-01-04.

[48]彭立明. 一种制鞋用自动贴压底机[P]. 湖南：CN109043741A,2018-12-21.

[49]吴玉娟,罗远航,彭立明,宿宁,陈娟,郑飞燕,赵倩,衡相文,丁文江. 放电等离子烧结调控含细小LPSO结构的高强韧镁合金制备方法[P]. 上海市：CN108950331A,2018-12-07.

[50]彭立明,袁灵洋,刘保良,王渠东,丁文江. 非热处理强化高强高韧压铸铝镁硅合金及其制备方法[P]. 上海：CN108754256A,2018-11-06.

[51]钱圣男,董闯,吴玉娟,邹建新,曾小勤,彭立明,谷立东,衡相文. 一种源自溶质均匀模型的高强高塑性Mg-Gd-Y-Zr铸造合金及其制备方法[P]. 辽宁：CN108456815A,2018-08-28.

[52]郑飞燕,李健,彭立明,李娟. 一种采用搅拌摩擦加工提高镁锆晶粒细化剂细化效率的方法[P]. 江苏：CN108359822A,2018-08-03.

[53]付彭怀,王丹,周逸源,彭立明. 降低镁稀土合金高温固溶处理中晶粒显著粗化的方法[P]. 上海：CN108265187A,2018-07-10.

[54]彭立明,李娟,郑飞燕,李健. 一种镁合金压铸余料废料的在线回收处理装置及处理工艺[P]. 江苏：CN108193053A,2018-06-22.

[55]刘希琴,李娟,李健,刘子利,朱伟平,彭立明. 一种大型复杂腔体类压铸件端面的加工夹具[P]. 江苏：CN107891298A,2018-04-10.

[56]刘子利,李健,刘希琴,李娟,朱伟平,彭立明. 一种压铸模的滑块顶针机构[P]. 江苏：CN107838397A,2018-03-27.

[57]郑飞燕,彭立明,林旺腾,谭帅,陈娟,吴玉娟. 防止电偶腐蚀的螺孔结构的制备方法及其结构[P]. 上海：CN107775182A,2018-03-09.

[58]吴玉娟,衡相文,彭立明,容伟,赵倩,陈娟,丁文江. 一种磁场铸造调控含LPSO结构高强韧镁合金制备方法[P]. 上海：CN107460386A,2017-12-12.

[59]吴玉娟,赵倩,彭立明,刘保良,王科,袁灵洋,丁文江. 适用于非均匀壁厚复杂铸件的多点定向挤压铸造方法[P]. 上海：CN107350452A,2017-11-17.

[60]陈娟,韩靖宇,彭立明,吴玉娟,郑飞燕,丁文江. 镁合金中含细小LPSO结构的细晶复合组织的制备方法[P]. 上海：CN107312988A,2017-11-03.

[61]付彭怀,王迎新,王丹,彭立明,丁文江. 砂型铸造稀土镁合金及其制备方法[P]. 上海：CN107201472A,2017-09-26.

[62]陈娟,刘越,彭立明,韩靖宇,邓南香,丁文江. 钯/镁#二氧化钛气致调光薄膜及其制备[P]. 上海：CN107190238A,2017-09-22.

[63]陈娟,廖海光,韩靖宇,彭立明,郑飞燕,吴玉娟,刘越,丁文江. 一种原位制备含硼镁基复合材料的方法[P]. 上海：CN106282637A,2017-01-04.

[64]陈娟,刘越,韩靖宇,彭立明,丁文江. 氢致变色功能薄膜的原位光谱通气测试装置[P]. 上海：CN106248596A,2016-12-21.

[65]吴玉娟,程晓伟,彭立明,韩靖宇,陈娟,刘保良,丁文江. 铸造镁合金的真空吸铸装置[P]. 上海：CN106166607A,2016-11-30.

[66]吴玉娟,容伟,王英,张宇,彭立明,陈娟,丁文江. 高强度高Gd含量的变形镁合金及其制备方法[P]. 上海：CN106148792A,2016-11-23.

[67]蒋尧夫,丁文江,彭立明,付彭怀,朱永奎. 一种水冷内燃机缸盖以及装有这种缸盖的水冷内燃机[P]. 上海：CN105888873A,2016-08-24.

[68]蒋尧夫,丁文江,彭立明,付彭怀,朱永奎. 摩擦焊接结构组件、水冷内燃机的缸盖、水冷内燃机以及装有水冷内燃机的机械装置[P]. 上海：CN105517749A,2016-04-20.

[69]吴玉娟,容伟,彭立明,陈娟,张宇,丁文江. 一种含Zn和重稀土Gd的高强度铸造镁合金及制备方法[P]. 上海：CN105483485A,2016-04-13.

[70]郑飞燕,陈娟,叶兵,朱永奎,彭立明. 电机转子的搅拌摩擦焊接装置及方法[P]. 上海：CN105171227A,2015-12-23.

[71]蒋尧夫,丁文江,彭立明,付彭怀,朱永奎,姚真裔. 内燃机缸盖、内燃机及装有这种内燃机的机械装置[P]. 上海：CN104863743A,2015-08-26.

[72]蒋尧夫,丁文江,付彭怀,彭立明,朱永奎,郭兴伍. 一种水冷内燃机缸盖以及装有这种缸盖的水冷内燃机[P]. 上海：CN104727967A,2015-06-24.

[73]张超,戴柏凡,王祎铖,李月刚,王军,曾一文,付彭怀,彭立明. 环保型镁合金熔炼保护气及其制备方法和应用[P]. 江苏：CN104498744A,2015-04-08.

[74]吴玉娟,都亚仙,彭立明,孙明,郑飞燕,陈娟,曾小勤,丁文江. 具有LPSO结构的铸态Mg-Gd-Zn(-Zr)合金的制备方法[P]. 上海：CN104372225A,2015-02-25.

[75]吴玉娟,萧柱华,彭立明,郑飞燕,易轰,容伟,丁文江. 含硅、锌和Gd(-Y)的耐热稀土镁合金及其制备方法[P]. 上海：CN104195396A,2014-12-10.

[76]钱胜前,胡小禹,彭立明,付彭怀,丁文江. 利用中频磁场实现的镁稀土合金的快速固溶处理方法[P]. 上海：CN103911570A,2014-07-09.

[77]彭立明,王成琪,郑飞燕,李学文. 两片式轮毂的连接方法[P]. 上海：CN103909342A,2014-07-09.

[78]孙明,彭立明,胡小禹,付彭怀,彭颖红,丁文江. 采用钕铁硼磁铁废料制备镁钕中间合金的方法[P]. 上海：CN103667751A,2014-03-26.

[79]肖旅,李宝辉,彭立明,邹文兵,付彭怀,李中权. 稀土镁合金熔炼及纯净化的方法[P]. 上海：CN103667755A,2014-03-26.

[80]陈丽平,王迎新,彭立明. 平板镁合金砂型铸造中砂型温度场的测量方法[P]. 上海：CN103542953A,2014-01-29.

[81]付彭怀,高菲,彭立明,王迎新,蒋海燕,丁文江. 高强度阻尼镁合金[P]. 上海：CN103484742A,2014-01-01.

[82]彭叔森,乌学东,曾志翔,彭立明,曹慧军,吴斌. 镁合金基体表面防腐用有机硅溶胶-凝胶涂层的制备方法[P]. 浙江：CN103254762A,2013-08-21.

[83]彭立明,郑飞燕,付彭怀,吴玉娟,沈渊明. 利用植物灰分制备Mg/Mg2Si复合材料的方法[P]. 上海：CN103243229A,2013-08-14.

[84]彭立明,郑飞燕,吴玉娟,付彭怀,王渠东,丁怀新. 发动机活塞局部表面强化的工艺方法[P]. 上海：CN102717243A,2012-10-10.

[85]胡斌,彭立明,曾小勤. 基于镁基合金的摩托车发动机缸套的制造方法[P]. 上海：CN101934365A,2011-01-05.

[86]王迎新,彭立明,蒋海燕,付彭怀,丁文江. 镁合金砂型铸造用树脂自硬砂及其制备方法[P]. 上海：CN101804443A,2010-08-18.

[87]王迎新,彭立明,蒋海燕,丁文江. 用于高速挤压的变形镁合金及其制备方法[P]. 上海：CN101805866A,2010-08-18.

[88]王迎新,彭立明,蒋海燕,吴国华,丁文江. 双联式镁合金连续铸造装置[P]. 上海：CN101797637A,2010-08-11.

[89]王迎新,彭立明,付彭怀,蒋海燕,丁文江. 镁合金熔炼的锆复合饼及其制备方法[P]. 上海：CN101798635A,2010-08-11.

[90]曾小勤,丁文江,常建卫,彭立明,林凌,郭志刚. 基于金属气相的多元纳米氢化物颗粒制备方法及其反应装置[P]. 上海：CN101767773A,2010-07-07.

[91]张亮,王迎新,彭立明,丁文江. 镁合金金属型铸造涂料及其制备方法[P]. 上海：CN101658899,2010-03-03.

[92]曾小勤,林凌,丁文江,彭立明. 镁液净化温度可调节输送坩埚[P]. 上海：CN101603777,2009-12-16.

[93]彭立明,马岚,靳丽,董杰,付彭怀,王锋华,丁文江,郑兴伟. 含稀土变形镁合金的塑性成型方法[P]. 上海：CN101586223,2009-11-25.

[94]彭立明,王迎新,蒋海燕,丁文江. 具有自动气体保护装置的镁合金金属型低压铸造型腔[P]. 上海：CN101537481,2009-09-23.

[95]吴国华,丁文江,彭立明. 镁熔体净化装置[P]. 上海：CN101532092,2009-09-16.

[96]王迎新,彭立明,张亮,丁文江. 镁合金树脂砂砂型铸造用阻燃剂及其应用[P]. 上海：CN101502867,2009-08-12.

[97]张亮,彭立明,王迎新,丁文江,匡建中. 镁合金金属型低压铸造涂料及其制备方法[P]. 上海：CN101391281,2009-03-25.

[98]张亮,彭立明,王迎新,丁文江,陈广森. 镁合金低压铸造升液管涂料及其制备方法[P]. 上海：CN101391282,2009-03-25.

[99]陈广森,王迎新,吴国华,彭立明,丁文江. 镁合金陶瓷型精密铸造方法[P]. 上海：CN101181735,2008-05-21.

[100]林金保,王渠东,彭立明. 泡沫镁的熔体发泡制备方法[P]. 上海：CN101135015,2008-03-05.

[101]杜林,彭立明,章祯彦,马岚. Mg-Zn-Zr变形镁合金制备方法[P]. 上海：CN101121979,2008-02-13.

[102]章桢彦,彭立明,丁文江,曾小勤. 含稀土铸造镁合金及其制备方法[P]. 上海：CN1962914,2007-05-16.

[103]刘六法,丁怀新,彭立明,王迎新. 铝合金汽车发动机支架的挤压铸造制备方法[P]. 上海：CN1951605,2007-04-25.

[104]董杰,曾小勤,彭立明,张平,丁文江,杨建新,颜文辉,王树琪. 镁合金潜流式水平连铸机[P]. 上海：CN1943911,2007-04-11.

[105]彭立明,曾小勤,杨艳玲,丁文江,刘六法,丁怀新. 镁合金汽车发动机支架的挤压铸造制备方法[P]. 上海：CN1887480,2007-01-03.

[106]彭立明,付彭怀,蒋海燕,曾小勤,翟春泉,丁文江. 多组分气体混合装置[P]. 上海：CN1883783,2006-12-27.

[107]丁文江,付彭怀,彭立明,蒋海燕,曾小勤,翟春泉. 含稀土高强度铸造镁合金及其制备方法[P]. 上海：CN1752251,2006-03-29.

[108]何上明,曾小勤,彭立明,丁文江. 高强度耐热镁合金及其制备方法[P]. 上海：CN1676646,2005-10-05.

[109]彭立明,曾一文,曾小勤,丁文江,毛协民. 采用1,1-二氟乙烷为保护气氛的镁合金熔炼方法[P]. 上海：CN1587424,2005-03-02.

[110]彭立明,曾一文,曾小勤,丁文江,蒋海燕. 采用二氟甲烷为保护气氛的镁合金熔炼方法[P]. 上海：CN1587425,2005-03-02.

[111]彭立明,毛协民,毛协国,解洪湛,徐华萍. 一种热型连铸凝固界面的检测与计算机控制系统[P]. 上海：CN1559724,2005-01-05.

[112]吴国华,彭立明,曾小勤,丁文江. 镁合金熔炼炉[P]. 上海：CN1390963,2003-01-15.

[113]吴国华,曾小勤,卢晨,彭立明. 镁合金废旧料再生工艺[P]. 上海：CN1390967,2003-01-15.

[114]彭立明,曾小勤,丁文江,卢晨,翟春泉. 镁合金专用水平连铸机[P]. 上海：CN1317383,2001-10-17.

发明授权：

[1]付彭怀,徐雯钰,朱荣玉,肖刚,彭立明,丁文江. 一种储氢镁合金及其制备方法[P]. 上海市：CN113789462B,2023-04-07.

[2]彭寿,王伟,陈娟,周文彩,齐帅,于浩,曾红杰,彭立明,邓南香,陈炎. 一种太阳能电池板及其用途[P]. 上海市：CN112864263B,2023-01-24.

[3]彭寿,王伟,陈娟,周文彩,齐帅,于浩,曾红杰,彭立明,邓南香,陈炎. 一种太阳能电池板的制备方法[P]. 上海市：CN112951944B,2022-11-18.

[4]陈娟,陈炎,彭立明,邓南香,吴玉娟,董泽麟,王廷炎,丁文江. 碳氟/钯/镁-钌气致调光薄膜及其制备方法[P]. 上海市：CN112596279B,2022-11-11.

[5]方浩澜,陈娟,彭立明,刘峻嘉,申炜,王廷炎,陈炎,崔元勋,董泽麟,管颖添,邓南香,丁文江. 氟碳/钯/镁-钪氢致变色薄膜及其制备方法[P]. 上海市：CN113215544B,2022-10-28.

[6]彭立明,袁灵洋,杨磊,肖刚,杨超. 一种非热处理强化高强高韧压铸铝硅合金[P]. 上海市：CN114411020B,2022-10-14.

[7]吴玉娟,薛艳婷,邓庆琛,武千业,陈凯,常治宇,宿宁,彭立明,丁文江. 一种含稀土耐热高强镁合金材料及其制备方法[P]. 上海市：CN113528916B,2022-08-23.

[8]陈海军,李中军,彭立明. 一种室温下伯胺氧化自偶联制备亚胺的方法[P]. 河南省：CN112028789B,2022-07-22.

[9]吴玉娟,武千业,邓庆琛,薛艳婷,陈凯,常治宇,宿宁,彭立明,丁文江. 选区激光熔化技术制备高模量高强度镁基复合材料的方法[P]. 上海市：CN113528877B,2022-06-28.

[10]丁之光,付彭怀,朱荣玉,肖刚,彭立明,丁文江. 一种储氢镁合金的制备方法[P]. 上海市：CN113695536B,2022-05-27.

[11]彭立明,兰乔,刘保良,常治宇,袁灵洋,吴玉娟,潘泽明. 一种外露加热式升液管[P]. 上海市：CN112743063B,2022-04-08.

[12]朱永,刘晓春,黄巧生,彭立明,郑飞燕,韩盼文. 工件落座气检系统有效性检验系统和方法[P]. 上海市：CN111854653B,2022-03-15.

[13]徐雯钰,付彭怀,刘大志,陈娟,吴玉娟,彭立明,丁文江. 提高激光选区熔化增材制造镁/镁合金零件致密度的方法[P]. 上海市：CN113414406B,2022-03-11.

[14]吴玉娟,常治宇,彭立明,刘保良,兰乔,宿宁,邓庆琛,薛晓瑜,武千叶,薛艳婷,丁文江. 硼酸铝晶须增强稀土镁合金复合材料及其制备方法[P]. 上海市：CN112410688B,2022-03-01.

[15]郭兴伍,高晨璟,聂乐文,彭立明. 在ITO玻璃表面制备纳米结构WO-(3)薄膜的方法[P]. 上海市：CN110510890B,2022-01-11.

[16]王南清,付彭怀,廖海光,陈娟,彭立明. 基于激光选区熔化(SLM)增材制造技术的多孔镁稀土合金植入物的制备方法[P]. 上海市：CN110394447B,2021-12-24.

[17]范鹏,付彭怀,郑飞燕,彭立明. 一种铝/镁合金半固态浆料原位制备与成型方法及装置[P]. 上海市：CN111069566B,2021-12-17.

[18]吴玉娟,邓庆琛,彭立明,罗远航,宿宁,常治宇,薛晓瑜. 选区激光熔化增材制造技术制备高强韧镁稀土合金的方法[P]. 上海市：CN110681869B,2021-08-03.

[19]付彭怀,倪航,王南清,王飞,蒋强,王迎新,彭立明,丁文江. 一种铸造过程中镁合金熔体的保护方法[P]. 上海市：CN110860675B,2021-04-02.

[20]王科,付彭怀,彭立明,王迎新. 一种镁、铝合金铸件凝固过程中热裂纹的预测方法[P]. 上海市：CN110111861B,2020-12-22.

[21]彭立明,韩盼文,袁灵洋,郑飞燕,徐宏,胡志恒,应伟勇. 一种高强韧压铸铝合金及其制备方法[P]. 上海市：CN109881056B,2020-11-06.

[22]彭立明,兰乔,刘保良,袁灵洋,吴玉娟,付彭怀. 利用双冷却条件获得细小二次枝晶臂间距的合金铸造方法[P]. 上海市：CN110202121B,2020-08-04.

[23]陈娟,邓南香,彭立明,刘越,吴玉娟,丁文江. 一种镁基合金调制薄膜及其制备方法和应用[P]. 上海市：CN109881169B,2020-07-14.

[24]彭立明,袁灵洋,郑飞燕,陆珂伟,周定贤,陈海平,杨小亮. 一种非热处理强化高强高韧压铸铝镁铜合金及其制备方法[P]. 上海市：CN110079714B,2020-06-12.

[25]郑飞燕,彭立明,林旺腾,谭帅,陈娟,吴玉娟. 防止电偶腐蚀的螺孔结构的制备方法及其结构[P]. 上海市：CN107775182B,2020-05-22.

[26]付彭怀,王迎新,王丹,彭立明,丁文江. 砂型铸造稀土镁合金及其制备方法[P]. 上海市：CN107201472B,2020-04-24.

[27]陈娟,韩靖宇,彭立明,吴玉娟,郑飞燕,丁文江. 镁合金中含细小LPSO结构的细晶复合组织的制备方法[P]. 上海市：CN107312988B,2020-04-24.

[28]吴玉娟,赵倩,彭立明,刘保良,王科,袁灵洋,丁文江. 适用于非均匀壁厚复杂铸件的多点定向挤压铸造方法[P]. 上海市：CN107350452B,2020-03-06.

[29]陈娟,刘越,韩靖宇,彭立明,丁文江. 氢致变色功能薄膜的原位光谱通气测试装置[P]. 上海市：CN106248596B,2020-01-07.

[30]吴玉娟,衡相文,彭立明,容伟,赵倩,陈娟,丁文江. 一种磁场铸造调控含LPSO结构高强韧镁合金制备方法[P]. 上海市：CN107460386B,2020-01-07.

[31]付彭怀,王丹,周逸源,彭立明. 降低镁稀土合金高温固溶处理中晶粒显著粗化的方法[P]. 上海市：CN108265187B,2020-01-07.

[32]郑飞燕,李健,彭立明,李娟. 一种采用搅拌摩擦加工提高镁锆晶粒细化剂细化效率的方法[P]. 江苏省：CN108359822B,2020-01-03.

[33]彭立明,袁灵洋,刘保良,王渠东,丁文江. 非热处理强化高强高韧压铸铝镁硅合金及其制备方法[P]. 上海市：CN108754256B,2019-12-06.

[34]吴玉娟,罗远航,彭立明,宿宁,陈娟,郑飞燕,赵倩,衡相文,丁文江. 放电等离子烧结调控含细小LPSO结构高强韧镁合金制备[P]. 上海市：CN108950331B,2019-12-06.

[35]陈娟,刘越,彭立明,邓南香,吴玉娟,韩靖宇,阎熙,丁文江. 氟碳/钯/镁-五氧化二铌气致调光薄膜及其制备方法[P]. 上海市：CN109136841B,2019-11-01.

[36]陈娟,刘越,彭立明,韩靖宇,邓南香,丁文江. 钯/镁-二氧化钛气致调光薄膜及其制备[P]. 上海市：CN107190238B,2019-10-22.

[37]吴玉娟,容伟,王英,张宇,彭立明,陈娟,丁文江. 高强度高Gd含量的变形镁合金及其制备方法[P]. 上海市：CN106148792B,2019-02-22.

[38]陈娟,廖海光,韩靖宇,彭立明,郑飞燕,吴玉娟,刘越,丁文江. 一种原位制备含硼镁基复合材料的方法[P]. 上海市：CN106282637B,2018-10-23.

[39]蒋尧夫,丁文江,彭立明,付彭怀,朱永奎. 摩擦焊接结构组件、水冷内燃机的缸盖、水冷内燃机以及装有水冷内燃机的机械装置[P]. 上海市：CN105517749B,2018-01-19.

[40]吴玉娟,容伟,彭立明,陈娟,张宇,丁文江. 一种含Zn和重稀土Gd的高强度铸造镁合金及制备方法[P]. 上海市：CN105483485B,2017-10-31.

[41]苏远歧,王奇,陈莉,彭立明. 基于随机森林的多尺度印刷品缺陷检测方法[P]. 陕西省：CN104715481B,2017-07-25.

[42]吴玉娟,都亚仙,彭立明,孙明,郑飞燕,陈娟,曾小勤,丁文江. 具有LPSO结构的铸态Mg-Gd-Zn(-Zr)合金的制备方法[P]. 上海市：CN104372225B,2017-02-22.

[43]彭立明,王成琪,郑飞燕,李学文. 两片式轮毂的连接方法[P]. 上海市：CN103909342B,2017-01-11.

[44]张超,戴柏凡,王祎铖,李月刚,王军,曾一文,付彭怀,彭立明. 环保型镁合金熔炼保护气及其制备方法和应用[P]. 江苏省：CN104498744B,2016-08-31.

[45]陈丽平,王迎新,彭立明. 平板镁合金砂型铸造中砂型温度场的测量方法[P]. 上海市：CN103542953B,2016-03-02.

[46]孙明,彭立明,胡小禹,付彭怀,彭颖红,丁文江. 采用钕铁硼磁铁废料制备镁钕中间合金的方法[P]. 上海市：CN103667751B,2016-01-13.

[47]彭立明,郑飞燕,付彭怀,吴玉娟,沈渊明. 利用植物灰分制备Mg/Mg-(2)Si复合材料的方法[P]. 上海市：CN103243229B,2015-08-19.

[48]彭叔森,乌学东,曾志翔,彭立明,曹慧军,吴斌. 镁合金基体表面防腐用有机硅溶胶-凝胶涂层的制备方法[P]. 浙江省：CN103254762B,2015-07-01.

[49]胡斌,彭立明,曾小勤. 基于镁基合金的摩托车发动机缸套的制造方法[P]. 上海市：CN101934365B,2012-05-30.

[50]王迎新,彭立明,付彭怀,蒋海燕,丁文江. 镁合金熔炼的锆复合饼及其制备方法[P]. 上海市：CN101798635B,2012-02-22.

[51]王迎新,彭立明,蒋海燕,丁文江. 用于高速挤压的变形镁合金及其制备方法[P]. 上海市：CN101805866B,2011-06-29.

[52]张亮,彭立明,王迎新,丁文江,匡建中. 镁合金金属型低压铸造涂料及其制备方法[P]. 上海市：CN101391281B,2011-01-26.

[53]张亮,彭立明,王迎新,丁文江,陈广森. 镁合金低压铸造升液管涂料及其制备方法[P]. 上海市：CN101391282B,2011-01-12.

[54]张亮,王迎新,彭立明,丁文江. 镁合金金属型铸造涂料及其制备方法[P]. 上海市：CN101658899B,2010-12-08.

[55]杜林,彭立明,章祯彦,马岚. Mg-Zn-Zr变形镁合金制备方法[P]. 上海市：CN101121979B,2010-12-01.

[56]彭立明,王迎新,蒋海燕,丁文江. 具有自动气体保护装置的镁合金金属型低压铸造型腔[P]. 上海市：CN101537481B,2010-09-08.

[57]吴国华,丁文江,彭立明. 镁熔体净化装置[P]. 上海市：CN101532092B,2010-08-18.

[58]刘六法,丁怀新,彭立明,王迎新. 铝合金汽车发动机支架的挤压铸造制备方法[P]. 上海市：CN100423872C,2008-10-08.

[59]何上明,曾小勤,彭立明,丁文江. 高强度耐热镁合金的制备方法[P]. 上海市：CN100387743C,2008-05-14.

[60]彭立明,付彭怀,蒋海燕,曾小勤,翟春泉,丁文江. 多组分气体混合装置[P]. 上海市：CN100355490C,2007-12-19.

[61]彭立明,曾小勤,杨艳玲,丁文江,刘六法,丁怀新. 镁合金汽车发动机支架的挤压铸造制备方法[P]. 上海市：CN100349673C,2007-11-21.

[62]丁文江,付彭怀,彭立明,蒋海燕,曾小勤,翟春泉. 含稀土高强度铸造镁合金及其制备方法[P]. 上海市：CN100335666C,2007-09-05.

[63]彭立明,毛协民,毛协国,解洪湛,徐华萍. 一种热型连铸凝固界面的检测与计算机控制系统[P]. 上海市：CN1241702C,2006-02-15.

[64]吴国华,彭立明,曾小勤,丁文江. 镁合金熔炼炉[P]. 上海市：CN1186467C,2005-01-26.

[65]吴国华,曾小勤,卢晨,彭立明,丁文江. 镁合金废旧料再生工艺[P]. 上海市：CN1177071C,2004-11-24.

[66]彭立明,曾小勤,丁文江,卢晨,翟春泉. 镁合金专用水平连铸机[P]. 上海市：CN1132710C,2003-12-31.

实用新型：

[1]彭立明,兰乔,刘保良,常治宇,袁灵洋,吴玉娟,潘泽明. 用于翻转定向冷却铸造成形装置的节能型翻转动力系统[P]. 上海市：CN214920444U,2021-11-30.

[2]彭立明,兰乔,刘保良,袁灵洋,吴玉娟,付彭怀. 一种翻转定向冷却铸造成型系统[P]. 上海市：CN210587115U,2020-05-22.

[3]彭立明,李娟,郑飞燕,李健. 一种镁合金压铸余料废料的在线回收处理装置[P]. 江苏：CN208055430U,2018-11-06.

[4]刘子利,李健,刘希琴,李娟,朱伟平,彭立明. 一种压铸模的滑块顶针机构[P]. 江苏：CN207592758U,2018-07-10.

[5]刘希琴,李娟,李健,刘子利,朱伟平,彭立明. 一种大型复杂腔体类压铸件端面的加工夹具[P]. 江苏：CN207593324U,2018-07-10.

[6]蒋尧夫,丁文江,彭立明,付彭怀,朱永奎. 电感应加热焊接结构件、水冷内燃机的缸盖、水冷内燃机及装有水冷内燃机的机械装置[P]. 上海：CN204253203U,2015-04-08.

[7]蒋尧夫,丁文江,彭立明,付彭怀,朱永奎. 摩擦焊接结构件、水冷内燃机的缸盖、水冷内燃机以及装有水冷内燃机的机械装置[P]. 上海：CN203948184U,2014-11-19.

[8]蒋尧夫,丁文江,付彭怀,彭立明,朱永奎,郭兴伍. 一种水冷内燃机缸盖、装有这种缸盖的水冷内燃机以及装有这种水冷内燃机的机械装置[P]. 上海：CN203809142U,2014-09-03.

[9]杨艳玲,彭立明,曾小勤,许昊,胡斌. 分体控温挤压铸造设备[P]. 上海：CN201168775,2008-12-24.

[10]林金保,彭立明,王渠东. 用于金属形变原位动态观察的拉伸装置[P]. 上海：CN201083658,2008-07-09.

论文专著：

发表SCI论文230篇(Scopus总他引超3600次，H index=32)，合著专著1部。

出版专著：

[1]《Semisolid rheoforming of magnesium alloys: A review》，Chang, Zhiyu; Su, Ning; Wu, Yujuan*; Lan, Qiao; Peng, Liming; Ding, Wenjiang，MATERIALS & DESIGN, ELSEVIER SCI LTD, THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND, 108990, 2020-10.

[2]《Research progress on solidification structure of alloys by synchrotron X-ray radiography: A review》Wang, Yongbiao*; Jia, Sensen; Wei, Mingguang; Peng, Liming; Wu, Yujuan; Liu, Xintian。JOURNAL OF MAGNESIUM AND ALLOYS, KEAI PUBLISHING LTD, 16 DONGHUANGCHENGGEN NORTH ST, BEIJING, DONGHENG DISTRICT 100717, PEOPLES R CHINA, 396-413, 2020-06.

[3]《Effects of solid solution treatments on microstructure and mechanical properties of AM60B magnesium alloys with RE addition》，Peng, LM*; Zeng, XQ; Yuan, GY; Ding, WJ，MAGNESIUM ALLOYS 2003, PTS 1 AND 2, TRANS TECH PUBLICATIONS LTD, BRANDRAIN 6, CH-8707 ZURICH-UETIKON, SWITZERLAND, 153-158, 2003.

发表英文论文：

[1]Chang, Zhiyu; Wang, Xingchen; Wu, Yujuan; Peng, Liming; Ding, Wenjiang.Review on criteria for assessing the processability of semisolid alloys.Materials Letters, 2021, 282: 128835.

[2]Xue, Xiaoyu; Wu, Yujuan; Su, Ning; Heng, Xiangwen; Deng, Qingchen; Chang, Zhiyu; Peng, Liming.High-strength GWZ1031K alloy with gradient structure induced by surface mechanical attrition treatment.Materials Characterization, 2020, 170: 110701.

[3]Chang, Zhiyu; Wu, Yujuan; Heng, Xiangwen; Su, Ning; Zhang, Yu; Yu, Baoyi; Zheng, Li; Shao, Xiaohong; Peng, Liming.Characterization of microstructure and nanoscale phase in Mg-15Gd-1Zn (wt.%) alloy fabricated by rotating magnetic field casting.Materials Characterization, 2020, 170: 110660.

[4]Su, Ning; Deng, Qingchen; Wu, Yujuan; Peng, Liming; Yang, Kun; Chen, Qiang.Deformation-induced dissolution of long-period stacking ordered structures and its re-precipitation in a Mg-Gd-Zn-Mn alloy.Materials Characterization, 2020, 110756.

[5]Wang, Yinchuan; Fu, Penghuai; Wang, Nanqing; Peng, Liming; Kang, Bin; Zeng, Hui*; Yuan, Guangyin*; Ding, Wenjiang.Challenges and Solutions for the Additive Manufacturing of Biodegradable Magnesium Implants.Engineering, 2020, 6(11): 1267-1275.

[6]Zhang, Yu*; Rong, Wei; Wu, Yujuan; Peng, Liming*. Achieving ultra-high strength in Mg-Gd-Ag-Zr wrought alloy via bimodal-grained structure and enhanced precipitation. Journal of Materials Science & Technology, 2020, 54: 160-170.

[7]Chang, Zhiyu; Su, Ning; Wu, Yujuan; Lan, Qiao; Peng, Liming; Ding, Wenjiang.Semisolid rheoforming of magnesium alloys: A review.Materials and Design, 2020, 195: 108990.

[8]Zhang, Yu*; Rong, Wei; Wu, Yujuan*; Peng, Liming.Tuning texture and precipitation using Y/Gd atomic ratio in iso- concentration Mg-Y-Gd-Ag-Zr extruded alloys.Materials Characterization, 2020, 167: 110473.

[9]Wang, Dan; Fu, Penghuai*; Peng, Liming; Wang, Yingxin; Ding, Wenjiang.A study of microstructure, mechanical behavior and strengthen mechanism in the Mg-10Gd-0.2Zn-(Y)-0.4Zr alloy.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2020, 793: 139881.

[10]Su Ning; Wu Yujuan*; Chang Zhiyu; Deng Qingchen; Peng Liming; Yang Kun; Chen Qiang.Selective variant growth of precipitates in an as-extruded Mg-Gd-Zn-Mn alloy.Materials Letters, 2020, 272: 127853.

[11]Su, Ning; Wu, Yujuan*; Zhang, Yu; Cheng, Xiaowei; Peng, Liming; Yang, Kun; Chen, Qiang.Microstructure evolution difference in Mg96.5Gd2.5Zn1 alloys extruded from as-castand solution-treated states.Journal of Materials Processing Technology, 2020, 282: 116666.

[12]Wang, Yongbiao*; Wei, Mingguang; Liu, Xintian; Chen, Cong; Wu, Yujuan; Peng, Liming; Chen, Long-Qing.Phase-field study of the effects of the multi-controlling parameters on columnar dendrite during directional solidification in hexagonal materials.European Physical Journal E, 2020, 43(7): 41.

[13]Deng, Nanxiang; Chen, Juan*; Peng, Li-Ming; Liu, Yue; Chen, Yan; Lai, Tianxing; Ding, Wen-Jiang; Zhu, Hong.Effects of Amorphous and Nanocrystalline Structures on Hydrogen-Induced Optical Performance of Modulated Mg-Gd Films with Various Composition Fluctuations.ACS Applied Materials & Interfaces, 2020, 12(26): 29605-29613.

[14]Su, Ning; Xue, Xiaoyu; Zhou, Hui; Wu, Yujuan*; Deng, Qingchen; Yang, Kun; Chen, Qiang; Chen, Bin; Peng, Liming.Effects of nanoprecipitates and LPSO structure on deformation and fracture behaviour of high-strength Mg-Gd-Y-Zn-Mn alloys.Materials Characterization, 2020, 165: 110396.

[15]Deng, Qingchen; Wu, Yujuan*; Luo, Yuanhang; Su, Ning; Xue, Xiaoyu; Chang, Zhiyu; Wu, Qianye; Xue, Yanting; Peng, Liming.Fabrication of high-strength Mg-Gd-Zn-Zr alloy via selective laser melting.Materials Characterization, 2020, 165: 110377.

[16]Luo, Yuanhang; Wu, Yujuan*; Deng, Qingchen; Zhang, Yu; Chen, Juan; Peng, Liming.Microstructures and mechanical properties of Mg-Gd-Zn-Zr alloys prepared by spark plasma sintering.Journal of Alloys and Compounds, 2020, 820: 153405.

[17]Wang, Yongbiao*; Jia, Sensen; Wei, Mingguang; Peng, Liming; Wu, Yujuan; Ji, Yanzhou; Chen, Long-Qing; Liu, Xintian.Coupling in situ synchrotron X-ray radiography and phase-field simulation to study the effect of low cooling rates on dendrite morphology during directional solidification in Mg-Gd alloys.Journal of Alloys and Compounds, 2020, 815: 152385.

[18]Ghulam Asghar, L.M Peng*,P.H Fu, Lingyang Yuan, Yue Liu. Role of Mg2Si precipitates size in determining the ductility of A357 cast alloy,L.M Peng Mater. & Design, 186 (2020), 108280.

[19]Wang, Dan; Fu, Penghuai*; Peng, Liming; Wang, Yingxin; Ding, Wenjiang.Quench sensitivity characterization of a LPSO-phase containing Mg alloy.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2019, 749: 291-300.

[20]Zhang, Yu*; Rong, Wei; Wu, Yujuan; Peng, Liming*; Nie, Jian-Feng; Birbilis, Nick.A detailed HAADF-STEM study of precipitate evolution in Mg-Gd alloy.Journal of Alloys and Compounds, 2019, 777: 531-543.

[21]Zhou, Yiyuan; Fu, Penghuai*; Peng, Liming; Wang, Dan; Wang, Yingxin; Hu, Bin; Liu, Ming; Sachdev, Anil K.; Ding, Wenjiang.Precipitation modification in cast Mg-1Nd-1Ce-Zr alloy by Zn addition.Journal of Magnesium and Alloys, 2019, 7(1): 113-123.

[22]He, Chao; Wu, Yujuan*; Peng, Liming; Su, Ning; Chen, Qiang; Yuan, Shucheng; Liu, Yongjie; Wang, Qingyuan*.Effect of microstructure on small fatigue crack initiation and early propagation behavior in Mg-10Gd-3Y-0.3Zr alloy.International Journal of Fatigue, 2019, 119: 311-319.

[23]He, Chao; Shao, Xiaohong; Yuan, Shucheng; Peng, Liming*; Wu, Yujuan; Wang, Qingyuan*; Chen, Qiang.Small crack initiation and early propagation in an as-extruded Mg-10Gd-3Y-0.5Zr alloy in high cycle fatigue regime.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2019, 744: 716-723.

[24]Rong, Wei; Zhang, Yu; Wu, Yujuan*; Chen, Yuanli; Sun, Ming; Chen, Juan; Peng, Liming.The role of bimodal-grained structure in strengthening tensile strength and decreasing yield asymmetry of Mg-Gd-Zn-Zr alloys.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2019, 740: 262-273.

[25]Wang, Shuxian; Zhang, Yu*; Peng, Liming*.On the evolution of β' precipitate during creep in a Mg-3.3Y-0.1Zr(at.%) alloy.Materials Characterization, 2019, 147: 414-420.

[26]Pan, Jipeng; Fu, Penghuai; Peng, Liming*; Hu, Bin; Zhang, Haiming; Luo, Alan A..Basal slip dominant fatigue damage behavior in a cast Mg-8Gd-3Y-Zr alloy.International Journal of Fatigue, 2019, 118: 104-116.

[27]Zeng, Ji-Yong; Guo, Xing-Wu*; Guo, Jia-Cheng; Nie, Le-Wen; Gong, Lei-Chao; Peng, Li-Ming; Ding, Wen-Jiang.Preparation of new phytic acid chemical conversion coating with excellent corrosion resistance on magnesium alloys.Surface Technology, 2019, 48(10): 230-237.

[28]Wang, Ke; Fu, Penghuai*; Peng, Liming; Wang, Yingxin; Ding, Wenjiang.A Simplified Hot-Tearing Criterion for Shape Castings Based on Temperature-Field Simulation.Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2019, 50A(11): 5271-5280.

[29]Guo, Jiacheng; Guo, Xingwu*; Zeng, Jiyong; Nie, Lewen; Dong, Jie; Peng, Liming; Ding, Wenjiang.Effective strategy for improving infrared emissivity of Zn-Ni porous coating .Applied Surface Science, 2019, 485: 92-100.

[30]Wang, Dan; Fu, Penghuai; Peng, Liming*; Wang, Yingxin; Ding, Wenjiang.Development of high strength sand cast Mg-Gd-Zn alloy by co-precipitation of the prismatic beta' and beta(1) phases.Materials Characterization, 2019, 153: 157-168.

[31]Liu, Yue; Chen, Juan*; Peng, Liming; Deng, Nanxiang; Ding, Wenjiang.Fabrication and optical property improvement of gasochromic switchable mirror based on Pd/Mg-Nb2O5 thin film.International Journal of Hydrogen Energy, 2019, 44(29): 15205-15217.

[32]Yuan, Lingyang; Peng, Liming*; Han, Jingyu; Liu, Baoliang; Wu, Yujuan; Chen, Juan.Effect of Cu addition on microstructures and tensile properties of high pressure die-casting Al-5.5Mg-0.7Mn alloy.Journal of Materials Science & Technology, 2019, 35(6): 1017-1026.

[33]Heng, Xiangwen; Zhang, Yu*; Rong, Wei; Wu, Yujuan; Peng, Liming*.A super high-strength Mg-Gd-Y-Zn-Mn alloy fabricated by hot extrusion and strain aging.Materials and Design, 2019, 169: 107666.

[34]Tang, Tao; Zhou, Guowei; Li, Zihan; Li, Dayong*; Peng, Liming; Peng, Yinghong*; Wu, Peidong; Wang, Huamiao; Lee, Myoung-Gyu.A polycrystal plasticity based thermo-mechanical-dynamic recrystallization coupled modeling method and its application to light weight alloys.International Journal of Plasticity, 2019, 116: 159-191.

[35]Pan, Jipeng; Peng, Liming*; Fu, Penghuai; Zhang, Haiming; Miao, Jiashi; Yue, Haiyan; Luo, Alan A.*.The effects of grain size and heat treatment on the deformation heterogeneities and fatigue behaviors of GW83K magnesium alloys.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2019, 754: 246-257.

[36]He, Chao; Wu, Yujuan; Peng, Liming; Su, Ning; Li, Xue; Yang, Kun; Liu, Yongjie; Yuan, Shucheng; Tian, Renhui.Cyclic Deformation and Correspondent Crack Initiation at Low-Stress Amplitudes in Mg-Gd-Y-Zr Alloy.Materials, 2018, 11(12): 2429.

[37]Guo, Jiacheng; Guo, Xingwu*; Zeng, Jiyong; Nie, Lewen; Dong, Jie; Peng, Liming; Ding, Wenjiang.Influence of sodium dodecyl sulphate on the surface morphology and infrared emissivity of porous Ni film.Infrared Physics & Technology, 2018, 93: 162-170.

[38]Zhang, Yu*; Rong, Wei; Wu, Yujuan*; Peng, Liming; Nie, Jian-Feng; Birbilis, Nick.A comparative study of the role of Ag in microstructures and mechanical properties of Mg-Gd and Mg-Y alloys.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2018, 731: 609-622.

[39]Qian, Shengnan; Dong, Chuang*; Liu, Tianyu; Qin, Ying; Wang, Qing; Wu, Yujuan*; Gu, Lidong; Zou, Jianxin; Heng, Xiangwen; Peng, Liming; Zeng, Xiaoqin.Solute-homogenization model and its experimental verification in Mg-Gd-based alloys.Journal of Materials Science & Technology, 2018, 34(7): 1132-1141.

[40]Wang, Yongbiao; Peng, Liming*; Ji, Yanzhou; Chen, Xiaoxing; Wang, Cunlong; Wu, Yujuan; Fu, Yanan; Chen, Long-Qing.Effect of cooling rates on the dendritic morphology transition of Mg-6Gd alloy by in situ X-ray radiography.Journal of Materials Science & Technology, 2018, 34(7): 1142-1148.

[41]Zhang, Yu; Gore, Poorwa; Rong, Wei; Wu, Yujuan; Yan, Yuanming; Zhang, Ruifeng; Peng, Liming*; Nie, Jian-Feng; Birbilis, Nick*.Quasi-in-situ STEM-EDS insight into the role of Ag in the corrosion behaviour of Mg-Gd-Zr alloys.Corrosion Science, 2018, 136: 106-118.

[42]Liu, Yue; Chen, Juan*; Peng, Liming; Han, Jingyu; Deng, Nanxiang; Ding, Wenjiang; Chen, Weifan.Improved optical properties of switchable mirrors based on Pd/Mg-TiO2 films fabricated by magnetron sputtering.Materials and Design, 2018, 144: 256-262.

[43]Yang, Zhenzhen; Wang, Ke; Fu, Penghuai*; Peng, Liming; Hu, Bin; Liu, Ming; Sachdev, Anil K..Influence of alloying elements on hot tearing susceptibility of Mg-Zn alloys based on thermodynamic calculation and experimental.Journal of Magnesium and Alloys, 2018, 6(1): 44-51.

[44]Zhang, Yu; Zhu, Yuman; Rong, Wei; Wu, Yujuan; Peng, Liming*; Nie, Jian Feng; Birbilis, Nick.On the Precipitation in an Ag-Containing Mg-Gd-Zr Alloy.Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2018, 49A(2): 673-694.

[45]Tang, Tao; Shao, Yichuan; Li, Dayong*; Peng, Liming; Peng, Yinghong; Zhang, Shaorui; Wu, Peidong.Polycrystal plasticity simulation of extrusion of a magnesium alloy round bar: Effect of strain path non-uniformity.Journal of Alloys and Compounds, 2018, 730: 161-181.

[46]Han, Jingyu; Chen, Juan*; Peng, Liming; Tan, Shuai; Wu, Yujuan; Zheng, Feiyan; Yi, Hong。Microstructure, texture and mechanical properties of friction stir processed Mg-14Gd alloys.MATERIALS & DESIGN, 2017, 130: 90-102.

[47]Rong, Wei; Zhang, Yu; Wu, Yujuan*; Chen, Yuanli; Tang, Tao; Peng, Liming; Li, Dayong.Fabrication of high-strength Mg-Gd-Zn-Zr alloys via differential-thermal extrusion .Materials Characterization, 2017, 131: 380-387.

[48]Liu, H; Xu, W F; Wilson, N C; Peng, L M*; Nie, J F*.Formation Formation of and interaction between beta '(F) and beta ' phases in a Mg-Gd alloy.Journal of Alloys and Compounds, 2017, 712: 334-344.

[49]Li, Zhenming*; Zou, Hui; Dai, Jichun; Feng, Xuejiao; Sun, Ming; Peng, Liming.A comparison of low-cycle fatigue behavior between the solutionized and aged Mg-3Nd-0.2Zn-0.5Zr alloys.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2017, 695: 342-349.

[50]Guo, Jiacheng; Guo, Xingwu*; Xu, Wenbin; Zhang, Zhicheng; Dong, Jie; Peng, Liming; Ding, Wenjiang.A Zn-Ni coating with both high electrical conductivity and infrared emissivity prepared by hydrogen evolution method.Applied Surface Science, 2017, 402: 92-98.

[51]Liu, H; Xu, W F; Peng, L M*; Ding, W J; Nie, J F*.A simulation study of the distribution of beta ' precipitates in a crept Mg-Gd-Zr alloy.Computational Materials Science, 2017, 130: 152-164.

[52]Rong, Wei; Wu, Yujuan*; Zhang, Yu; Sun, Ming; Chen, Juan; Peng, Liming; Ding, Wenjiang.Characterization and strengthening effects of gamma ' precipitates in a high-strength casting Mg-15Gd-1Zn-0.4Zr (wt.%) alloy.Materials Characterization, 2017, 126: 1-9.

[53]Li, Jiehua*; Albu, Mihaela; Wu, Yujuan; Peng, Liming*; Dienstleder, Martina; Kothleitner, Gerald; Hofer, Ferdinand; Schumacher, Peter.Precipitation of Long-Period Stacking Ordered Structure in Mg-Gd-Zn-Mn Alloy.Advanced Engineering Materials, 2017, 19(4): UNSP 1600705.

[54]Wang, Y.; Rong, W.; Wu, Y. J.*; Peng, L. M.; Chen, J.; Ding, W. J.. Effects of Mn addition on the microstructures and mechanical properties of the Mg-15Gd-1Zn alloy.Journal of Alloys and Compounds, 2017, 698: 1066-1076.

[55]Li, Zhenming; Luo, Alan A.; Wang, Qigui; Zou, Hui; Dai, Jichun; Peng, Liming*.Fatigue characteristics of sand-cast AZ91D magnesium alloy.Journal of Magnesium and Alloys, 2017, 5(1): 1-12.

[56]Li, Zhenming*; Zou, Hui; Feng, Xuejiao; Dai, Jichun; Xiao, Zhengqiang; Peng, Liming*.Effect of Nd additions on fatigue characteristics of a cast Mg-Zn-Zr alloy.Journal of Materials Research, 2017, 32(6): 1083-1093.

[57]Liao, Haiguang; Fu, Penghuai*; Peng, Liming; Li, Jia; Zhang, Shuquan; Hu, Guoqi; Ding, Wenjiang.Microstructure and mechanical properties of laser melting deposited GW103K Mg-RE alloy.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2017, 687: 281-287.

[58]Li, Bingbing; Dong, Jie; Zhang, Zhenyan; Nie, Jian-Feng; Bourgeois, Laure; Peng, Liming*.On the strengthening precipitate phases and phase transformation of beta"/beta ' in a Mg-Sm-Zr alloy.Materials and Design, 2017, 116: 419-426.

[59]Rong, Wei; Zhang, Yu; Wu, Yujuan*; Sun, Ming; Chen, Juan; Wang, Ying; Han, Jingyu; Peng, Liming; Ding, Huaixin.Effects of Zr and Mn additions on formation of LPSO structure and dynamic recrystallization behavior of Mg-15Gd-1Zn alloy.Journal of Alloys and Compounds, 2017, 692: 805-816.

[60]Liao, Haiguang; Chen, Juan*; Peng, Liming; Han, Jingyu; Yi, Hong; Zheng, Feiyan; Wu, Yujuan; Ding, Wenjiang.Fabrication and characterization of magnesium matrix composite processed by combination of friction stir processing and high-energy ball milling.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2017, 683: 207-214.

[61]Yi, H; Peng, L M*; Zhang, D L; Zeng, W; Wan, L; Han, J Y; Cheng, X W; Ding, W J.Fabrication of a bulk GdN nanoparticles-reinforced Mg-Gd matrix nanocomposite with phenomenal mechanical properties.Materials Letters, 2016, 185: 127-130.

[62]Yue, Haiyan; Fu, Penghuai; Li, Zhenming; Peng, Liming*.Tensile crack initiation behavior of cast Mg-3Nd-0.2Zn-0.5Zr magnesium alloy.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2016, 673: 458-466.

[63]Li, Zhenming*; Luo, Alan A.; Wang, Qigui; Peng, Liming; Zhang, Peng.Fatigue Properties of Cast Magnesium Wheels.Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2016, 47A(8): 4239-4257.

[64]Li, Zhenming; Wang, Qigui; Luo, Alan A.; Zhang, Peng; Peng, Liming*.Size Effect on Magnesium Alloy Castings.Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2016, 47A(6): 2686-2704.

[65]Du, Yaxian; Wu, Yujuan*; Peng, Liming; Chen, Juan; Zeng, Xiaoqin; Ding, Wenjiang.Formation of lamellar phase with 18R-type LPSO structure in an as-cast Mg96Gd3Zn1(at%) alloy.Materials Letters, 2016, 169: 168-171.

[66]Hu, Xiaoyu; Fu, Penghuai; StJohn, David*; Peng, Liming*; Sun, Ming; Zhang, Mingxing.On grain coarsening and refining of the Mg-3Al alloy by Sm.Journal of Alloys and Compounds, 2016, 663: 387-394.

[67]Han, Jingyu; Chen, Juan*; Peng, Liming; Zheng, Feiyan; Rong, Wei; Wu, Yujuan; Ding, Wenjiang.Influence of processing parameters on thermal field in Mg-Nd-Zn-Zr alloy during friction stir processing.Materials & Design, 2016, 94: 186-194.

[68]Guo, Jiacheng; Guo, Xingwu*; Wang, Shaohua; Zhang, Zhicheng; Dong, Jie; Peng, Liming; Ding, Wenjiang.Effects of glycine and current density on the mechanism of electrodeposition, composition and properties of Ni-Mn films prepared in ionic liquid.Applied Surface Science, 2016, 365: 31-37.

[69]Wang, Yongbiao*; Peng, Liming; Ji, Yanzhou; Cheng, Xiaoxing; Wang, Nan; Zhao, Yan; Fu, Yanan; Chen, Long-Qing; Ding, Wenjiang.The effect of low cooling rates on dendrite morphology during directional solidification in Mg-Gd alloys: In situ X-ray radiographic observation.Materials Letters, 2016, 163: 218-221.

[70]Li, Juncai; He, Zongling; Fu, Penghuai*; Wu, Yujuan; Peng, Liming; Ding, Wenjiang.Heat treatment and mechanical properties of a high-strength cast Mg-Gd-Zn alloy.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2016, 651: 745-752.

[71]Zhang, Peng; Li, Zhenming*; Liu, Baoliang; Ding, Wenjiang; Peng, Liming.Improved tensile properties of a new aluminum alloy for high pressure die casting. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2016, 651: 376-390.

[72]Yue, Haiyan; Fu, Penghuai*; Peng, Liming; Li, Zhenming; Pan, Jipeng; Ding, Wenjiang.Damage morphology study of high cycle fatigued as-cast Mg-3.0Nd-0.2Zn-Zr (wt.%) alloy.Materials Characterization, 2016, 111: 93-105.

[73]Zhang, Yu; Alam, Talukder; Gwalani, Bharat; Rong, Wei; Banerjee, Rajarshi; Peng, Li-Ming*; Nie, Jian-Feng; Birbilis, Nick.On the role of Ag in enhanced age hardening kinetics of Mg-Gd-Ag-Zr alloys.Philosophical Magazine Letters, 2016, 96(6): 212-219.

[74]Peng Zhang; ZhenmingLi*; BaoliangLiu; WenjiangDing; LimingPeng.Improvedtensilepropertiesofanewaluminumalloy for high pressure die casting. Materials Science & EngineeringA, 2015, 651: 376-390.

[75]Li, Zhenming; Wang, Qigui; Luo, Alan A.; Fu, Penghuai; Peng, Liming*.Fatigue strength dependence on the ultimate tensile strength and hardness in magnesium alloys.International Journal of Fatigue, 2015, 80: 468-476.

[76]Li, Zhenming; Wang, Qigui; Luo, Alan A.; Peng, Liming*; Zhang, Peng.Fatigue behavior and life prediction of cast magnesium alloys.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2015, 647: 113-126.

[77]Wang, Yongbiao; Peng, Liming*; Wu, Yujuan; Zhao, Yan; Wang, Yongxin; Huang, Yongbing; Ding, Wenjiang.Phase-field modeling the effect of misfit on the precipitation of the second-phase particles and grain coarsening.Computational Materials Science, 2015, 100(PB): 166-172.

[78]Sun, Ming; Hu, Xiaoyu; Peng, Liming*; Fu, Penghuai; Ding, Wenjiang; Peng, Yinghong.On the production of Mg-Nd master alloy from NdFeB magnet scraps.Journal of Materials Processing Technology, 2015, 218: 57-61.

[79]Liu, Ningyuan; Zhang, Zhenyan*; Peng, Liming; Ding, Wenjiang.Microstructure evolution and mechanical properties of Mg-Gd-Sm-Zr alloys.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2015, 627: 223-229.

[80]Xinyu Chen; Yu Zhang; Liming Peng*; Chuan Zhang.Experimental investigation and thermodynamic assessment of the Mg–Gd–Ag system focused on Mg-rich region.CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry , 2015, 48(-): 43-54.

[81]W.F. Xu; Y. Zhang; L.M. Peng*; W.J. Ding; J.F. Nie.Formation of denuded zones in crept Mg–2.5Gd–0.1Zr alloy.Acta Materialia, 2015, 84(-): 317-329.

[82]Sun, Ming; Hu, Xiaoyu; Peng, Liming*; Fu, Penghuai; Peng, Yinghong.Effects of Sm on the grain refinement, microstructures and mechanical properties of AZ31 magnesium alloy.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2015, 620: 89-96.

[83]Yongbiao Wang; Liming Peng*; Yujuan Wu; Yan Zhao; Yongxin Wang; Yongbing Huang; Wenjiang Ding.Phase-field modeling the effect of misfit on the precipitation of the second-phase particles and grain coarsening.Computational Materials Science, 2014, 100: 166-172.

[84]Zhang, Yu; Wu, Yujuan*; Peng, Liming; Fu, Penghuai; Huang, Fei; Ding, Wenjiang.Microstructure evolution and mechanical properties of an ultra-high strength casting Mg-15.6Gd-1.8Ag-0.4Zr alloy.Journal of Alloys and Compounds, 2014, 615: 703-711.

[85]Wang, Shao-hua; Guo, Xing-wu*; Sun, Can; Gong, Jia; Peng, Li-Ming; Ding, Wen-jiang.Electrodeposition of Cu coating with high corrosion resistance on Mg-3.0Nd-0.2Zn-0.4Zr magnesium alloy.Transactions of Nonferrous Metals Society of China, 2014, 24(12): 3810-3817.

[86]Peng, Liming; Fu, Penghuai*; Li, Zhenming; Wang, Yingxin; Jiang, Haiyan.High cycle fatigue properties of cast Mg-xNd-0.2Zn-Zr alloys.Journal of Materials Science, 2014, 49(20): 7105-7115.

[87]W.F.Xu; Y.Zhang; L.M.Peng*; W.J.Ding; J.F.Nie.Linear precipitatechainsinMg-2.4Gd-0.1Zralloyaftercreep.Materials Letters, 2014, 137: 417-420.

[88]Xu, Wen-Fan*; Zhang, Yu; Terbush, Jessica Renae; Peng, Li-Ming*; Ding, Wen-Jiang; Nie, Jian-Feng.Effects of Alloying Elements on Creep Properties of Mg-Gd-Zr Alloys.Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2014, 45A(9): 4103-4116.

[89]Fu Penghuai; Peng Liming; Jiang Haiyan*; Ding Wenjiang; Zhai Chunquan.Tensile properties of high strength cast Mg alloys at room temperature: A review.China Foundry, 2014, 11(4): 277-286.

[90]Fan, T.*; Luo, L.; Ma, L.; Tang, B.; Peng, L.; Ding, W..First-principles study of full a-dislocations in pure magnesium.Journal of Applied Mechanics and Technical Physics, 2014, 55(4): 672-681.

[91]L.M. Peng; P.H.Fu; Z.M.Li*; H.Y.Yue; D.Y.Li; Y.X.Wang.High cyclefatiguebehaviorsoflowpressurecast Mg–3Nd–0.2Zn–2Zr alloys.Materials Science & Engineering A, 2014, 611: 170-176.

[92]Wang Ming-hui; Pan Rong-kai; Li Peng-bo; Bian Nan; Tang Bi-yu*; Peng Li-ming; Ding Wen-jiang.First-principles study on mechanical properties of LaMg3 and LaCuMg2.Journal of Central South University, 2014, 21(6): 2136-2142.

[93]Fan, Tou-Wen; Zhang, Quan; Ma, Li; Tang, Ping-Ying; Tang, Bi-Yu*; Peng, Li-Ming; Ding, Wen-Jiang.First-principles study of the dislocation core structures on basal plane in magnesium.European Journal of Mechanics - A: Solids , 2014, 45: 1-7.

[94]He, Zongling; Peng, Liming; Pe, Penghuai*; Wang, Yingxin; Hu, Xiaoyu; Ding, Wenjiang.High cycle fatigue improvement by heat-treatment for semi-continuous casting Mg96.34Gd2.5Zn1Zr0.16 alloy.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2014, 604: 78-85.

[95]Hu, Xiaoyu; Peng, Liming; Qian, Shengqian; Fu, Penghuai*; Ding, Wenjiang.Effects of intermediate frequency magnetic field on the solution treatment of Mg-Gd alloy.Materials Letters, 2014, 123: 238-241.

[96]Fan, Touwen; Wei, Liuting; Tang, Biyu*; Peng, Liming; Ding, Wenjiang.Effect of temperature-induced solute distribution on stacking fault energy in Mg-X(X = Li, Cu, Zn, Al, Y and Zr) solid solution: a first-principles study.Philosophical Magazine, 2014, 94(14): 1578-1587.

[97]Chen, Liping; Wang, Yingxin*; Peng, Liming; Fu, Penghuai; Jiang, Haiyan.Study on the interfacial heat transfer coefficient between AZ91D magnesium alloy and silica sand.Experimental Thermal and Fluid Science, 2014, 54: 196-203.

[98]Huang, Hao; Fu, Peng-huai*; Wang, Ying-xin; Peng, Li-Ming; Jiang, Hai-yan.Effect of pouring and mold temperatures on hot tearing susceptibility of AZ91D and Mg-3Nd-0.2Zn-Zr Mg alloys.Transactions of Nonferrous Metals Society of China, 2014, 24(4): 922-929.

[99]Wang, Shaohua; Guo, Xingwu*; Yang, Haiyan; Dai, JiChun; Zhu, Rongyu; Gong, Jia; Peng, Liming; Ding, Wenjiang.Electrodeposition mechanism and characterization of Ni-Cu alloy coatings from a eutectic-based ionic liquid.Applied Surface Science, 2014, 288: 530-536.

[100]Li, X. W.; Zheng, F. Y.; Wu, Y. J.*; Peng, L. M.; Zhang, Y.; Lin, D. L.; Ding, W. J..Modification of long period stacking ordered phase and improvement of mechanical properties of Mg-Gd-Zn-Zr alloy by friction stir processing.Materials Letters, 2013, 113: 206-209.

[101]He, Zongling; Fu, Penghuai*; Wu, Yujuan; Peng, Liming; Zhang, Yu; Li, Zhenming.High cycle fatigue behavior of as-cast Mg96.34Gd2.5Zn1Zr0.16 alloy fabricated by semi-continuous casting.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2013, 587: 72-78.

[102]Li, Zhenming; Wang, Qigui; Luo, Alan A.; Fu, Penghuai; Peng, Liming*; Wang, Yingxin; Wu, Guohua.High Cycle Fatigue of Cast Mg-3Nd-0.2Zn Magnesium Alloys.Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2013, 44A(11): 5202-5215.

[103]Li, Z. M.; Wang, Q. G.; Luo, A. A.; Peng, L. M.*; Fu, P. H.; Wang, Y. X. Improved high cycle fatigue properties of a new magnesium alloy.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2013, 582: 170-177.

[104]Fan, Tou-Wen; Luo, Li-Guo; Ma, Li; Tang, Bi-Yu*; Peng, Li-Ming; Ding, Wen-Jiang.Effects of Zn atoms on the basal dislocation in magnesium solution from Peierls-Nabarro model.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2013, 582: 299-304.

[105]Li, Z. M.; Fu, P. H.; Peng, L. M.*; Wang, Y. X.; Jiang, H. Y.; Wu, G. H. Comparison of high cycle fatigue behaviors of Mg-3Nd-0.2Zn-Zr alloy prepared by different casting processes.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 579: 170-179.

[106]Ma, Li; Fan, Tou Wen; Pan, Rong Kai; Tang, Bi Yu*; Peng, Li Ming; Ding, Wen Jiang. dislocation core properties in L1(2) Al3Sc and Al3Mg based on the Peierls-Nabarro model .Physica Status Solidi B-Basic Solid State Physics, 2013, 250(9): 1825-1831.

[107]Li, Zhenming; Fu, Penghuai*; Peng, Liming; Wang, Yingxin; Jiang, Haiyan.Strengthening mechanisms in solution treated Mg-yNd-zZn-xZr alloy.JOURNAL OF MATERIALS SCIENCE, 2013, 48(18): 6367-6376.

[108]Huang, H.; Wang, Y. X.; Fu, P. H.*; Peng, L. M.; Jiang, H. Y.; Xu, W. Y. Fluidity of AZ91D and Mg-3Nd-0.2Zn-Zr (wt-%) magnesium alloys: response to pouring and mould temperature.INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2013, 26(4): 213-219.

[109]Zhang, Quan; Fu, Lin; Fan, Tou-Wen; Tang, Bi-Yu*; Peng, Li-Ming; Ding, Wen-Jiang.Ab initio study of the effect of solute atoms Zn and Y on stacking faults in Mg solid solution.PHYSICA B-CONDENSED MATTER, 2013, 416: 39-44.

[110]Wu, Y. J.; Xu, C.; Zheng, F. Y.; Peng, L. M.*; Zhang, Y.; Ding, W. J.Formation and characterization of microstructure of as-cast Mg-6Gd-4Y-xZn-0.5Zr (x=0.3, 0.5 and 0.7 wt.%) alloys.MATERIALS CHARACTERIZATION, 2013, 79: 93-99.

[111]Ma, Li*; Fan, Tou-Wen; Tang, Bi-Yu; Peng, Li-Ming; Ding, Wen-jiang.Ab initio study of I-2 and T-2 stacking faults in C14 Laves phase MgZn2.EUROPEAN PHYSICAL JOURNAL B, 2013, 86(4): 188.

[112]Li, Zhenming; Fu, Penghuai*; Peng, Liming; Becker, Edward P.; Wu, Guohua.Influence of solution temperature on fatigue behavior of AM-SC1 cast magnesium alloy.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 565: 250-257.

[113]Li, Z. M.; Luo, A. A.; Wang, Q. G.; Peng, L. M.*; Fu, P. H.; Wu, G. H..Effects of grain size and heat treatment on the tensile properties of Mg-3Nd-0.2Zn (wt%) magnesium alloys .MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 564: 450-460.

[114]Ma, Li; Pan, Rong-Kai; Fan, Tou-Wen; Tang, Bi-Yu*; Peng, Li-Ming; Ding, Wen-Jiang.Ab initio study of {110} superdislocation properties in B2-MgRE (RE = La-Er) intermetallics. COMPUTATIONAL MATERIALS SCIENCE, 2013, 69: 168-172.

[115]Pan, Rong-Kai*; Ma, Li; Bian, Nan; Wang, Ming-Hui; Li, Peng-Bo; Tang, Bi-Yu; Peng, Li-Ming; Ding, Wen-Jiang.First-principles study on the elastic properties of B ' and Q phase in Al-Mg-Si (-Cu) alloys.PHYSICA SCRIPTA, 2013, 87(1): 015601.

[116]Tou Wen Fan; Jiang Ling Ke; Ling Fu; Bi Yu Tang; Li Ming Peng; Wen Jiang Ding.Ideal strength of Mg2X (X = Si, Ge, Sn and Pb) from first-principles.Journal of Magnesium and Alloys, 2013, 1(2): 163-168.

[117]Wang, Shaohua; Guo, Xingwu; Xie, Yijun; Liu, Lihua; Yang, Haiyan; Zhu, Rongyu; Gong, Jia; Peng, Liming; Ding, Wenjiang.Preparation of superhydrophobic silica film on Mg-Nd-Zn-Zr magnesium alloy with enhanced corrosion resistance by combining micro-arc oxidation and sol-gel method.SURFACE & COATINGS TECHNOLOGY, 2012, 213: 192-201.

[118]Liang Min-jie*; Liao Hai-hong; Ding Wen-jiang; Peng Li-ming; Fu Peng-huai.Microstructure characterization on Mg-2Nd-4Zn-1Zr alloy during heat treatment.Transactions of Nonferrous Metals Society of China, 2012, 22(10): 2327-2333.

[119]Chen, Xiao-Jun; Mo, Zhou-Sheng; Wang, Ren-Nian; Zeng, Meng-Xue; Tang, Bi-Yu*; Peng, Li-Ming; Ding, Wen-Jiang.Elastic and electronic properties of the Ti5X3 (X=Si, Ge, Sn, Pb) compounds from first-principles calculations.JOURNAL OF SOLID STATE CHEMISTRY, 2012, 194: 127-134.

[120]Zhang, Quan; Fan, Tou-Wen; Fu, Lin; Tang, Bi-Yu*; Peng, Li-Ming; Ding, Wen-Jiang.Ab-initio study of the effect of rare-earth elements on the stacking faults of Mg solid solutions.Intermetallics, 2012, 29: 21-26.

[121]Li Zhifeng*; Li Zhenming; Fu Penghuai; Peng Liming; Wang Yingxin.Study on High Cycle Fatigue Behavior of Gravity Cast Mg-3Nd-0.2Zn-Zr Magnesium Alloy.Rare Metal Materials and Engineering, 2012, 41(9): 1592-1596.

[122]Fu, Lin; Ke, Jiang-Ling; Zhang, Quan; Tang, Bi-Yu*; Peng, Li-Ming; Ding, Wen-Jiang.Mechanical properties of L1(2) type Al3X (X=Mg, Sc, Zr) from first-principles study.Physica Status Solidi. B: Basic Research , 2012, 249(8): 1510-1516.

[123]Wang, Ren-Nian; Tang, Bi-Yu*; Peng, Li-Ming; Ding, Wen-Jing.Ab initio study of the effect of Zr content on elastic and electronic properties of L1(2)-Al-3(Sc1-xZrx) alloys.Computational Materials Science, 2012, 59: 87-93.

[124]Ma, Lan; Mishra, Raja K.; Balogh, Michael P.; Peng, Liming*; Luo, Alan A.; Sachdev, Anil K.; Ding, Wenjiang.Effect of Zn on the microstructure evolution of extruded Mg-3Nd (-Zn)-Zr (wt.%) alloys.Materials Science and Engineering A-structural Materials Properties Microstructure and Processing, 2012, 543: 12-21.

[125]Ding, Wen-Jiang; Yi, Jian-Xiong; Chen, Ping; Li, Dong-Lin; Peng, Li-Ming; Tang, Bi-Yu*.Elastic properties and electronic structures of typical Al-Ce structures from first-principles calculations.Solid State Sciences, 2012, 14(5): 555-561.

[126]Wang, Ren-Nian; Zeng, Meng-Xue; Chen, Xiao-Jun; Mo, Zhou-Sheng; Tang, Bi-Yu*; Peng, Li-Ming; Ding, Wen-Jiang.Elastic properties of random L1(2)-Al-3(Sc0.5TM0.5) alloys from first-principle SQSs calculations.Journal of Materials Science, 2012, 47(8): 3793-3800.

[127]Zeng, Meng-Xue*; Wang, Ren-Nian; Tang, Bi-Yu; Peng, Li-Ming; Ding, Wen-Jiang.Elastic and electronic properties of tI26-type Mg12RE (RE = Ce, Pr and Nd) phases.Modelling and Simulation In Materials Science and Engineering, 2012, 20(3): 035018.

[128]Chen, Xiao-Jun; Zeng, Meng-Xue; Wang, Ren-Nian; Mo, Zhou-Sheng; Tang, Bi-Yu*; Peng, Li-Ming; Ding, Wen-Jiang.First-principles study of (Ti5-xMgx)Si-3 phases with the hexagonal D8(8) structure: Elastic properties and electronic structure.Computational Materials Science, 2012, 54: 287-292.

[129]Tang, Ping-Ying; Tang, Bi-Yu*; Peng, Li-Ming; Ding, Wen-Jiang.Effect of Y and Zn substitution on elastic properties of 6H-type ABCBCB LPSO structure in Mg97Zn1Y2 alloy.Materials Chemistry and Physics, 2012, 131(3): 634-641.

[130]Peng Liming*; Hu Bin*; Ding Wenjiang. Mechanical properties, aging behavior and microstructure evolution of Mg-Nd-Zn-Zr basedmagnesium matrix composite reinforced with alumina fibers.Materials Science Forum, 2012, 706-709.

[131]Luo, Alan A.*; Fu, Penghuai; Peng, Liming; Kang, Xiaoyu; Li, Zhenzhen; Zhu, Tianyu.Solidification Microstructure and Mechanical Properties of Cast Magnesium-Aluminum-Tin Alloys.Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science , 2012, 43A(1): 360-368.

[132]Yang, Fang; Fan, Tou-Wen; Wu, Jian; Tang, Bi-Yu*; Peng, Li-Ming; Ding, Wen-Jiang.Effects of Y and Zn atoms on the elastic properties of Mg solid solution from first-principles calculations.PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS, 2011, 248(12): 2809-2815.

[133]Ma, Lan; Mishra, Raja K.; Peng, Liming*; Luo, Alan A.; Ding, Wenjiang; Sachdev, Anil K.Texture and mechanical behavior evolution of age-hardenable Mg-Nd-Zn extrusions during aging treatment.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 529: 151-155.

[134]Zhang, Chuan*; Luo, Alan A.; Peng, Liming; Stone, Donald S.; Chang, Y. Austin.Thermodynamic modeling and experimental investigation of the magnesium-neodymium-zinc alloys.INTERMETALLICS, 2011, 19(11): 1720-1726.

[135]Tang, Ping-Ying; Wen, Li; Tong, Zhang-Fa; Tang, Bi-Yu*; Peng, Li-Ming; Ding, Wen-Jiang.Stacking faults in B2-structured magnesium alloys from first principles calculations .COMPUTATIONAL MATERIALS SCIENCE, 2011, 50(11): 3198-3207.

[136]Mo, Zhou-Sheng*; Zeng, Meng-Xue; Wang, Ren-Nian; Chen, Xiao-Jun; Tang, Bi-Yu; Peng, Li-Ming; Ding, Wen-Jiang.Study of the structural, elastic and electronic properties of ordered Ca(Mg1-xLix)(2) alloys from first-principles calculations.PHYSICA SCRIPTA, 2011, 84(5): 055603.

[137]Fan, T. W.*; Zhang, Q.; Tang, B. Y.; Peng, L. M.; Ding, W. J.Interaction between stacking faults in pure Mg.EUROPEAN PHYSICAL JOURNAL B, 2011, 82(2): 143-146.

[138]Tang Ping-ying; Wu Meng-meng; Tang Bi-yu*; Wang Ji-wei; Peng Li-ming; Ding Wen-jiang.Microstructure of 18R-type long period ordered structure phase in Mg97Y2Zn1 alloy.Transactions of Nonferrous Metals Society of China, 2011, 21(4): 801-806.

[139]Wang, Ji-Wei; Yang, Fang; Fan, Tou-Wen; Tang, Bi-Yu*; Peng, Li-Ming; Ding, Wen-Jiang.Theoretical investigation of new type of ternary magnesium alloys AMgNi(4) (A=Y, La, Ce, Pr and Nd).PHYSICA B-CONDENSED MATTER, 2011, 406(6-7): 1330-1335.

[140]Hu, Bin*; Peng, Liming; Ding, Wenjiang.Dry sliding wear behavior of Saffil fiber-reinforced Mg-10Gd-3Y-0.5Zr magnesium alloy-based composites.JOURNAL OF COMPOSITE MATERIALS, 2011, 45(6): 683-693.

[141]Wu, Meng-Meng; Jiang, Yi; Wang, Ji-Wei; Wu, Jian; Tang, Bi-Yu*; Peng, Li-Ming; Ding, Wen-Jiang.Structural, elastic and electronic properties of Mg(Cu1-xZnx)(2) alloys calculated by first-principles.JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509(6): 2885-2890.

[142]Tou-Wen Fan; Bi-Yu Tang; Li-Ming Peng; Wen-Jiang Ding.First-principles study of long-period stacking ordered-like multi-stacking fault structures in pure magnesium.Scripta Materialia, 2011, 64(10): 942-945.

[143]Yi, Jian-Xiong; Tang, Bi-Yu*; Chen, Ping; Li, Dong-Lin; Peng, Li-Ming; Ding, Wen-Jiang.Crystal structure of the mirror symmetry 10H-type long-period stacking order phase in Mg-Y-Zn alloy.JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509(3): 669-674.

[144]Yang, Y. L.; Peng, L. M.*; Fu, P. H.; Hu, B.; Ding, W. J.Study on microstructure of squeeze casting AZ91D alloy.MATERIALS SCIENCE AND TECHNOLOGY, 2011, 27(1): 189-193.

[145]Wu, Jian; Wen, Li; Tang, Bi-Yu*; Peng, Li-Ming; Ding, Wen-Jiang.Generalized planner fault energies, twinning and ductility of L1(2) type Al3Sc and Al3Mg.SOLID STATE SCIENCES, 2011, 13(1): 120-125.

[146]Wu, Meng-Meng; Tang, Bi-Yu*; Peng, Li-Ming; Ding, Wen-Jing.Elastic and electronic properties of ScMn(2) from first-principles calculations.PHYSICA B-CONDENSED MATTER, 2010, 405(23): 4812-4817.

[147]Zeng Xiaoqin; Wu Yujuan*; Peng Liming; Lin Dongliang; Ding Wenjiang; Peng Yinghong.LPSO STRUCTURE AND AGING PHASES IN Mg-Gd-Zn-Zr ALLOY.ACTA METALLURGICA SINICA, 2010, 46(9): 1041-1046.

[148]Wu, Meng-Meng; Wen, Li; Tang, Bi-Yu; Peng, Li-Ming; Ding, Wen-Jiang.First-principles study of elastic and electronic properties of MgZn2 and ScZn2 phases in Mg-Sc-Zn alloy.JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 506(1): 412-417.

[149]Hu, Bin; Peng, Liming; Yang, Yanling; Ding, Wenjiang.Effect of solidification conditions on microstructure, mechanical and wear properties of Mg-5Al-3Ca-0.12Sr magnesium alloy.MATERIALS & DESIGN, 2010, 31(8): 3901-3907.

[150]Hu, Bin; Peng, Liming*; Powell, Bob R.; Balough, Michael P.; Kubic, Robert C.; Sachdev, Anil K.Interfacial and fracture behavior of short-fibers reinforced AE44 based magnesium matrix composites.JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 504(2): 527-534.

[151]Tang, Bi-Yu; Li, Dong-Lin; Chen, Ping; Yi, Jian-Xiong; Wen, Li; Peng, Li-Ming; Ding, Wen-Jiang.The thermal properties of Al-Mg-TM (TM = Sc, Zr): Ab initio study.SOLID STATE SCIENCES, 2010, 12(5): 845-850.

[152]Jin, L.; Dong, J.; Wang, R.; Peng, L. M.Effects of hot rolling processing on microstructures and mechanical properties of Mg-3%Al-1%Zn alloy sheet.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527(7-8): 1970-1974.

[153]Tang, Bi-Yu; Chen, Ping; Li, Dong-Lin; Yi, Jian-Xiong; Wen, Li; Peng, Li-Ming; Ding, Wen-Jiang.First-principles investigation of the structural and mechanical properties of beta '' phase in Mg-Gd alloy system.JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 492(1-2): 416-420.

[154]L.M. Peng; Y.X. Wang; P.H. Fu; A.A. Luo; W.J. Ding. Numerical Simulation and Process Development for Low Pressure DieCasting of Magnesium Alloy Wheels.TRANSACTIONS OF THE AMERICAN FOUNDRY SOCIETY, 2010, 118: 355-362.

[155]Wu, Wenyun*; Jin, Li; Dong, Jie; Peng, Liming; Yao, Shoushan.Bending Mechanisms in AM30 Alloy Tube Using a Rotary Draw Bender.MATERIALS AND MANUFACTURING PROCESSES, 2010, 25(12): 1359-1364.

[156]Wen, L.; Chen, P.; Tong, Z. -F.; Tang, B. -Y.; Peng, L. -M.; Ding, W. -J.A systematic investigation of stacking faults in magnesium via first-principles calculation.EUROPEAN PHYSICAL JOURNAL B, 2009, 72(3): 397-403.

[157]Wu, Y. J.; Peng, L. M.; Zeng, X. Q.; Lin, D. L.; Ding, W. J.; Peng, Y. H.A high-strength extruded Mg-Gd-Zn-Zr alloy with superplasticity.JOURNAL OF MATERIALS RESEARCH, 2009, 24(12): 3596-3602.

[158]Chen, Ping; Li, Dong-Lin; Yi, Jian-Xiong; Wen, Li; Tang, Bi-Yu; Peng, Li-Ming; Ding, Wen-Jiang.Structural, elastic and electronic properties of beta ' phase precipitate in Mg-Gd alloy system investigated via first-principles calculation.SOLID STATE SCIENCES, 2009, 11(12): 2156-2161.

[159]Yang, Yanling; Peng, Liming; Fu, Penghuai; Hu, Bin; Ding, Wenjiang; Yu, Baozheng.Effects of Process Parameters on the Macrostructure of a Squeeze-Cast Mg-2.5 mass% Nd Alloy.MATERIALS TRANSACTIONS, 2009, 50(12): 2820-2825.

[160]Li, Dong-Lin; Chen, Ping; Yi, Jian-Xiong; Tang, Bi-Yu; Peng, Li-Ming; Ding, Wen-Jiang.Ab initio study on the thermal properties of the fcc Al3Mg and Al3Sc alloys.JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2009, 42(22): 225407.

[161]Yang, Yanling; Peng, Liming; Fu, Penghuai; Hu, Bin; Ding, Wenjiang.Identification of NdH2 particles in solution-treated Mg-2.5%Nd (wt.%) alloy.JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 485(1-2): 245-248.

[162]Chen, Ping; Li, Dong-Lin; Yi, Jian-Xiong; Tang, Bi-Yu; Peng, Li-Ming; Ding, Wen-Jiang.Microstructure and electronic characteristics of the 6H-type ABACAB LPSO structure in Mg97Zn1Y2 alloy.JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 485(1-2): 672-676.

[163]Yu, Wei-Yang; Wang, Na; Xiao, Xiao-Bing; Tang, Bi-Yu; Peng, Li-Ming; Ding, Wen-Jiang.First-principles investigation of the binary AB(2) type Laves phase in Mg-Al-Ca alloy: Electronic structure and elastic properties.SOLID STATE SCIENCES, 2009, 11(8): 1400-1407.

[164]Peng, Li-Ming; Chang, Jian-Wei; Guo, Xing-Wu; Atrens, Andrej; Ding, Wen-Jiang; Peng, Ying-Hong.Influence of heat treatment and microstructure on the corrosion of magnesium alloy Mg-10Gd-3Y-0.4Zr.JOURNAL OF APPLIED ELECTROCHEMISTRY, 2009, 39(6): 913-920.

[165]Zhang, Zhenyan; Peng, Liming*; Zeng, Xiaoqin; Fu, Penghuai; Ding, Wenjiang.Characterization of phases in a Mg-6Gd-4Sm-0.4Zr (wt.%) alloy during solution treatment., Materials Characterization, 2009, 60(6):555-559 DOI: 10.1016/j.matchar.2009.01.002

[166]Yu Wei-Yang; Tang Bi-Yu; Peng Li-ming; Ding Wen-Jiang.Electronic structure and mechanical properties of alpha-Mg3Sb2.Acta Physica Sinica, 2009, 58(6).

[167]Wu, Y. J.; Zeng, X. Q.; Lin, D. L.; Peng, L. M.; Ding, W. J.The microstructure evolution with lamellar 14H-type LPSO structure in an Mg96.5Gd2.5Zn1 alloy during solid solution heat treatment at 773 K.JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 477(1-2): 193-197.

[168]Lin, Jinbao; Wang, Qudong; Peng, Liming; Roven, Hans J.Microstructure and high tensile ductility of ZK60 magnesium alloy processed by cyclic extrusion and compression. JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 476(1-2): 441-445.

[169]Ding, W. J.; Wu, Y. J.; Peng, L. M.; Zeng, X. Q.; Yuan, G. Y.; Lin, D. L.Formation of 14H-type long period stacking ordered structure in the as-cast and solid solution treated Mg-Gd-Zn-Zr alloys.JOURNAL OF MATERIALS RESEARCH, 2009, 24(5): 1842-1854.

[170]Xiao, Xiao-Bing; Tang, Bi-Yu; Liao, Sun-Qi; Peng, Li-Ming; Ding, Wen-jiang.Thermodynamic and electronic properties of quaternary hydrides LixNa1-xMgH3.JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 474(1-2): 522-526.

[171]Lin JinBao; Peng Liming; Wang QuDong; Hans, J. R.; Ding WenJiang.Anisotropic plastic deformation behavior of as-extruded ZK60 magnesium alloy at room temperature.Science in China - Series E: Technological Sciences , 2009, 52(1): 161-165.

[172]Chang Jian-wei; Guo Xing-wu; Peng Li-ming; Ding Wen-jiang; Peng Ying-hong.Characterization of anodic coating formed on Mg-3Nd-0.2Zn-0.4Zr Mg alloy in alkaline electrolyte.Transactions of Nonferrous Metals Society of China, 2008, 18.

[173]Chang Jian-wei; Guo Xing-wu; Peng Li-ming; Ding Wen-jiang; Peng Ying-hong.Characterization of anodic coating formed on Mg-3Nd-0.2Zn-0.4Zr Mg alloy in alkaline electrolyte.Transactions of Nonferrous Metals Society of China, 2008, 18.

[174]Zhang Zhen-yan; Peng Li-ming; Zeng Xiao-qin; Ding Wen-Jiang.Effects of Cu and Mn on mechanical properties and damping capacity of Mg-Cu-Mn alloy.Transactions of Nonferrous Metals Society of China, 2008, 18.

[175]Lin, Jinbao*; Wang, Qudong; Peng, Liming; Roven, Hans J.Study on deformation behavior and strain homogeneity during cyclic extrusion and compression.Journal of Materials Science, 2008, 43(21): 6920-6924.

[176]Wang, Na*; Yu, Wei Yang; Tang, Bi Yu; Peng, Li Ming; Ding, Wen Jiang.Structural and mechanical properties of Mg(17)Al(12) and Mg(24)Y(5) from first-principles calculations .Journal of Physics D: Applied Physics , 2008, 41(19): 195408.

[177]Fu, Penghuai; Luo, Alan A.; Jiang, Haiyan; Peng, Liming; Yu, Yandong; Zhai, Chunquan; Sachdev, Anil K..Low-pressure die casting of magnesium alloy AM50: Response to process parameters.JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 205(1-3): 224-234.

[178]Fu Penghuai; Peng Liming; Jiang Haiyan; Chang Jianwei; Zhai Chunquan.Effects of heat treatments on the microstructures and mechanical properties of Mg-3Nd-0.2Zn-0.4Zr (wt.%) alloy.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 486(1-2): 183-192.

[179]Fu Penghuai; Peng Liming; Hang Haiyan; Zhang Zhenyan; Zhai Chunquan.Fracture behavior and mechanical properties of Mg-4Y-2Nd-1Gd-0.4Zr (wt.%) alloy.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 486(1-2): 572-579.

[180]Lin, Jinbao; Wang, Qudong; Peng, Liming; Peng, Tao.Effect of the cyclic extrusion and compression processing on microstructure and mechanical properties of as-extruded ZK60 magnesium alloy.MATERIALS TRANSACTIONS, 2008, 49(5): 1021-1024.

[181]Chang, J. W.; Peng, L. M.; Guo, X. W.; Atrens, A.; Fu, P. H.; Ding, W. J.; Wang, X. S..Comparison of the corrosion behaviour in 5% NaCl solution of Mg alloys NZ30K and AZ91D JOURNAL OF APPLIED ELECTROCHEMISTRY, 2008, 38(2): 207-214.(IF=1.791)

[182]Wang Qudong; Lin Jinbao; Peng Liming; Chen Yongjun.Influence of cyclic extrusion and compression on the mechanical property of Mg alloy ZK60.Acta Metallurgica Sinica, 2008, 44(1): 55-58.

[183]Chang, Jianwei; Guo, Xingwu; He, Shangming; Fu, Penghuai; Peng, Liming; Ding, Wenjiang.Investigation of the corrosion for Mg-xGd-3Y-0.4Zr (x=6,8,10,12 wt%) alloys in a peak-aged condition.CORROSION SCIENCE, 2008, 50(1): 166-177.

[184]Fu Penghuai, Peng Liming*, Jiang Haiyan, et al, Chemical composition optimization of gravity cast Mg-yNd-xZn-Zr alloy , Materials Science and Engineering A , 496 (2008) 177–188., (IF=2.201)

[185]Chang, Jian-Wei; Fu, Peng-Huai; Guo, Xing-Wu; Peng, Li-Ming; Ding, Wen-Jiang.The effects of heat treatment and zirconium on the corrosion behaviour of Mg-3Nd-0.2Zn-0.4Zr (wt.%) alloy.CORROSION SCIENCE, 2007, 49(6): 2612-2627.

[186]Chang, Jian-Wei; Guo, Xing-Wu; Fu, Peng-Huai; Peng, Li-Ming; Ding, Wen-Jiang.Effect of heat treatment on corrosion and electrochemical behaviour of Mg-3Nd-0.2Zn-0.4Zr (wt.%) alloy.ELECTROCHIMICA ACTA, 2007, 52(9): 3160-3167.

[187]He, S. M.; Zeng, X. Q.; Peng, L. M.; Gao, X.; Nie, J. F.; Ding, W. J.Microstructure and strengthening mechanism of high strength Mg-10Gd-2Y-0.5Zr alloy.JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 427(1-2): 316-323.

[188]Zhen Yan Zhang; Li Ming Peng; Xiao Qin Zeng; Lin Du; Lan Ma; Wen Jiang Ding.Effects of Extrusion on the Mechanical Properties and Damping Capacity of Mg-1.8Cu-0.5Mn Alloy.Materials Science Forum, 2007, 62.

[189]Fu Penghuai, Peng Liming*, Jiang haiyan, et al.,Zr-containing precipitates in Mg-3wt%Nd-0.2wt%Zn-0.4wt%Zr alloy during solution treatment at 540℃, Material Science Forum, 546-549 (2007):97~100

[190]Ding Wenjing, Peng Liming*, et al., Study on microstructure and mechanical property of high strength Mg-Nd-Zn-Zr alloy., (invited report), Science Material Forum.,546-549 (2007):433~436

[191]He, S. M.; Peng, L. M.; Zeng, X. Q.; Ding, W. J.; Zhu, Y. P.Comparison of the microstructure and mechanical properties of a ZK60 alloy with and without 1.3 wt.% gadolinium addition.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 433(1-2): 175-181.

[192]Gao, X.; He, S. M.; Zeng, X. Q.; Peng, L. M.; Ding, W. J.; Nie, J. F.Microstructure evolution in a Mg-15Gd-0.5Zr (wt.%) alloy during isothermal aging at 250 degrees C.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 431(1-2): 322-327.

[193]He, S. M.; Zeng, X. Q.; Peng, L. M.; Gao, X.; Nie, J. F.; Ding, W. J.Precipitation in a Mg-10Gd-3Y-0.4Zr (wt.%) alloy during isothermal ageing at 250 degrees C.JOURNAL OF ALLOYS AND COMPOUNDS, 2006, 421(1-2): 309-313.

[194]Li, H*; Peng, LM; Gong, M; He, LH; Zhao, JH; Zhang, YF.Processing and microstructure of Ti3SiC2/M(M=Ni or Co) composites.Materials Letters, 2005, 59(21): 2647-2649.

[195]Peng, LM; Mao, XM; Xu, KD; Ding, WJ.Property and thermal stability of in situ composite Cu-Cr alloy contact cable.JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 166(2): 193-198.

[196]Li, H*; Peng, LM; Gong, M; Zhao, JH; He, LH.Effect of Al addition on synthesis of the Ti3SiC2 by vacuum sintering.Zeitschrift fur Physikalische Chemie-International Journal of Research in Physical Chemistry & Chemical Physics, 2005, 219(10): 1411-1420.

[197]Peng, LM*; Mao, XM; Xu, KD; Ding, WJ.In-situ composite Cu-Cr contact cables with high strength and high conductivity.Rare Metals, 2002, 21(1): 62-66.

[198]Chang, Zhiyu; Wu, Yujuan; Su, Ning; Deng, Qingchen; Wu, Qianye; Xue, Yanting; Peng, Liming; Ding, Wenjiang.Microstructural evolution of Mg-10Gd-3Y-1Zn-0.4Zr (wt%)

[199]Peng, Liming . alloy prepared by strain-induced melt activation process. Role of Mg2Si precipitates size in determining the ductility of A357 cast alloy -- DOI: https://doi.org/10.1016/j.matdes.2019.108280

发表中文期刊论文：

[1]孙宝德,疏达,付华栋,汪东红,彭立明,王新云,朱言言,王华明,丁文江,谢建新.高端新材料智能制造的发展机遇与方向[J/OL].中国工程科学:1-9[2023-06-27].http://kns.cnki.net/kcms/detail/11.4421.G3.20230626.1015.022.html

[2]高睿恒,李贞,王雪强,包有宇,彭立明,王迎新.高速铁路轻量化设计棘轮的铸造工艺研究[J/OL].热加工工艺,2023(21):128-132+136[2023-06-27].DOI:10.14158/j.cnki.1001-3814.20230260.

[3]付彭怀,孙启才,王嘉诚,李德江,王泽忠,赵正江,周力,朱胜利,丁胜长,刘锡林,胡国琦,鲍明东,彭立明.真空度对真空压铸镁合金副车架品质的影响[J].特种铸造及有色合金,2023,43(01):88-91.DOI:10.15980/j.tzzz.2023.01.018.

[4]彭立明,邓庆琛,吴玉娟,付彭怀,刘子翼,武千业,陈凯,丁文江.镁合金选区激光熔化增材制造技术研究现状与展望[J].金属学报,2023,59(01):31-54.

[5]徐雯钰,林金铭,付彭怀,陈娟,胡国琦,彭立明.热处理对SLM成形Mg-3.0Nd-Zn-Zr合金性能的影响[J].特种铸造及有色合金,2022,42(09):1076-1081.DOI:10.15980/j.tzzz.2022.09.005.

[6]金启豪,陈娟,彭立明,李子言,阎熙,李春曦,侯城成,袁铭扬.碳纤维增强树脂基复合材料与铝/镁合金连接研究进展[J].材料工程,2022,50(01):15-24.

[7]付彭怀,王南清,廖海光,徐雯钰,彭立明,陈娟,胡国琦,丁文江.激光选区熔化增材制造高强度Mg-15Gd-1Zn-0.4Zr合金的显微组织与力学性能（英文）[J].Transactions of Nonferrous Metals Society of China,2021,31(07):1969-1978.

[8]肖旅,侯正全,吴国华,蒋斌,庞松,彭立明,宋江凤,龚政轩,刘文才,张宇.高强韧稀土镁合金大型复杂铸件制造技术研究现状及展望[J].特种铸造及有色合金,2021,41(07):793-801.DOI:10.15980/j.tzzz.2021.07.001.

[9]韩盼文,袁灵洋,Ghulam Asghar,刘保良,胡志恒,付彭怀,彭立明.Zn对压铸Al-Si合金共晶Si的粗化及粗化后变质处理[J].特种铸造及有色合金,2021,41(04):483-489.DOI:10.15980/j.tzzz.2021.04.020.

[10]付彭怀,丁浩源,李德江,王泽忠,赵正江,周力,朱胜利,丁胜长,刘锡林,彭立明.镁合金副车架压铸过程计算机仿真与工艺优化[J].特种铸造及有色合金,2021,41(02):231-235.DOI:10.15980/j.tzzz.2021.02.022.

[11]兰乔,刘保良,常治宇,袁灵洋,韩盼文,王嘉诚,彭立明.轻合金铸造技术发展历程与展望[J].铸造技术,2021,42(02):141-152.DOI:10.16410/j.issn1000-8365.2021.02.018.

[12]王银川,付彭怀,王南清,彭立明,康斌,曾晖,袁广银,丁文江.增材制造可降解镁合金植入物面临的挑战及其对策[J].Engineering,2020,6(11):137-154.

[13]岳海燕,付彭怀,徐旭文,彭立明,沈冰峰.铸造Mg-3.0Nd-0.2Zn-Zr(wt．%)镁合金高周疲劳累积损伤行为[J].材料科学与工程学报,2020,38(05):693-700.DOI:10.14136/j.cnki.issn1673-2812.2020.05.001.

[14]岳海燕,付彭怀,胡斌,李贞明,王迎新,彭立明,Anil K.Sachdev.双级时效在铸造Mg-3Nd-0.2Zn-Zr(wt.%)镁合金中的应用（英文）[J].材料科学与工程学报,2020,38(04):517-524.DOI:10.14136/j.cnki.issn1673-2812.2020.04.001.

[15]吴玉娟,黄飞,彭立明.固溶处理对铸造Mg-Gd-Ag-Zr合金的显微组织和室温拉伸力学性能的影响[J].热加工工艺,2020,49(08):120-125.DOI:10.14158/j.cnki.1001-3814.20193079.

[16]曾纪勇,郭兴伍,彭立明,丁文江.镁合金植酸化学转化膜研究进展[J].材料保护,2019,52(12):124-128.DOI:10.16577/j.cnki.42-1215/tb.2019.12.023.

[17]曾纪勇,郭兴伍,郭嘉成,聂乐文,弓磊超,彭立明,丁文江.镁合金表面新型高耐蚀性植酸化学转化膜的制备[J].表面技术,2019,48(10):230-237.DOI:10.16490/j.cnki.issn.1001-3660.2019.10.028.

[18]贾森森,王永彪,肖艳秋,吴玉娟,彭立明,刘建秀,刘新田.镁合金微观组织的相场法模拟进展[J].材料导报,2019,33(19):3306-3312.

[19]彭立明,刘越,陈娟,丁文江.氢致变色镁基功能薄膜研究进展[J].中国材料进展,2018,37(12):970-977+993.

[20]程晓伟,吴玉娟,容伟,彭立明,丁文江.差温挤压工艺对Mg_96.32Gd_2.5Zn₁Zr_0.18合金显微组织和力学性能的影响[J].热加工工艺,2018,47(05):42-45.DOI:10.14158/j.cnki.1001-3814.2018.05.010.

[21]付彭怀,彭立明,丁文江.汽车轻量化技术:铝/镁合金及其成型技术发展动态[J].中国工程科学,2018,20(01):84-90.

[22]徐晨,吴玉娟,彭立明,丁文江.不同热处理下Mg-10Gd-3Y-0.5Zr合金拉伸力学性能统计分析[J].热加工工艺,2017,46(10):253-255.DOI:10.14158/j.cnki.1001-3814.2017.10.068.

[23]陈娟,彭立明,韩靖宇,吴玉娟,郑飞燕,廖海光.基于摩擦加工技术的镁合金表面改性研究现状[J].表面技术,2017,46(03):9-19.DOI:10.16490/j.cnki.issn.1001-3660.2017.03.002.

[24]郭兴伍,郭嘉成,章志铖,徐文彬,聂乐文,弓磊超,彭立明,丁文江.镁合金材料表面处理技术研究新动态[J].表面技术,2017,46(03):53-65.DOI:10.16490/j.cnki.issn.1001-3660.2017.03.008.

[25]彭立明.百家争鸣,共论“21世纪绿色工程材料”——镁合金的发展未来——镁合金材料工程前沿技术论坛侧记[J].中国材料进展,2015,34(10):728-729.

[26]萧柱华,吴玉娟,彭立明,曾小勤,丁文江.固溶处理对压铸GZ142合金显微组织的影响[J].金属热处理,2015,40(09):140-142.DOI:10.13251/j.issn.0254-6051.2015.09.028.

[27]肖旅,邹文兵,刘颖卓,何凯,李中权,秦守益,迟秀梅,崔恩强,彭立明,王迎新.高强耐热镁合金舱体铸造技术[J].航天制造技术,2015(01):18-22.

[28]曹丽杰,吴玉娟,彭立明,王渠东,丁文江.具有长周期结构的Mg–Gd–Zn–Zr合金的微结构和摩擦学行为(英文)[J].Transactions of Nonferrous Metals Society of China,2014,24(12):3785-3791.

[29]王少华,郭兴伍,孙灿,龚佳,彭立明,丁文江.Mg-3.0Nd-0.2Zn-0.4Zr镁合金表面电沉积Cu镀层及其耐腐蚀性能(英文)[J].Transactions of Nonferrous Metals Society of China,2014,24(12):3810-3817.

[30]王明辉,潘荣凯,李鹏博,卞楠,唐壁玉,彭立明,丁文江.First-principles study on mechanical properties of LaMg₃ and LaCuMg₂[J].Journal of Central South University,2014,21(06):2136-2142.

[31]高菲,付彭怀,李应典,彭立明,蒋海燕,王迎新,翟春泉.铸造Mg-Gd-Y-Al镁合金的拉伸与阻尼性能[J].特种铸造及有色合金,2014,34(04):440-444.DOI:10.15980/j.tzzz.2014.04.032.

[32]黄皓,付彭怀,王迎新,彭立明,蒋海燕.浇铸温度与模具温度对AZ91D和Mg-3Nd-0.2Zn-Zr镁合金热裂性能的影响(英文)[J].Transactions of Nonferrous Metals Society of China,2014,24(04):922-929.

[33]王迎新,丁怀新,付彭怀,彭立明,蒋海燕.Mg-Nd-Zn-Zr合金光谱分析样品的制备过程研究[J].铸造,2014,63(04):356-359.

[34]朱守茹,付彭怀,胡小禹,彭立明,丁文江.Mg-Al合金晶粒细化研究进展[J].铸造技术,2014,35(01):13-16.

[35]付彭怀,潘厚华,高菲,李应典,彭立明,蒋海燕,翟春泉.高强度镁合金阻尼性能的研究[J].特种铸造及有色合金,2013,33(07):593-596.DOI:10.15980/j.tzzz.2013.07.013.

[36]袁鹏,郭兴伍,彭立明,付彭怀,龚佳,吴国华.微量氟化钾对镁合金在商用冷却液中腐蚀行为的影响[J].机械工程材料,2013,37(04):58-61.

[37]吴玉娟,彭立明,赵素,李德江,黄飞,丁文江.Ignition-Proof Properties of a High-Strength Mg-Gd-Ag-Zr Alloy[J].Journal of Shanghai Jiaotong University(Science),2012,17(06):643-647.

[38]梁敏洁,廖海洪,丁文江,彭立明,付彭怀.热处理过程中Mg-2Nd-4Zn-1Zr合金微观组织的结构特征(英文)[J].Transactions of Nonferrous Metals Society of China,2012,22(10):2327-2333.

[39]李智峰,李贞明,付彭怀,彭立明,王迎新.重力铸造Mg-3Nd-0.2Zn-Zr镁合金高周疲劳行为的研究[J].稀有金属材料与工程,2012,41(09):1592-1596.

[40]彭立明.镁——21世纪的绿色工程材料[J].世界科学,2012(06):44-45.

[41]黄皓,付彭怀,彭立明,蒋海燕,王迎新,翟春泉.模具温度和浇注温度对AZ91D镁合金热裂和流动性能的影响[J].特种铸造及有色合金,2012,32(01):81-84.

[42]唐平英,吴萌萌,唐壁玉,王继伟,彭立明,丁文江.Mg₉₇Y₂Zn₁合金中18R型长周期有序相的微观结构(英文)[J].Transactions of Nonferrous Metals Society of China,2011,21(04):801-806.

[43]丁文江,付彭怀,彭立明,蒋海燕,王迎新,吴国华,董杰,郭兴伍.先进镁合金材料及其在航空航天领域中的应用[J].航天器环境工程,2011,28(02):103-109.

[44]吴玉娟,丁文江,彭立明,曾小勤,林栋樑.高性能稀土镁合金的研究进展[J].中国材料进展,2011,30(02):1-9.

[45]黄飞,吴玉娟,彭立明,董杰,林栋樑,丁文江,彭颖红.Mg-Gd-Zn(-Zr)合金中长周期堆垛有序结构的研究现状及发展趋势[J].材料导报,2011,25(03):8-12+16.

[46]胡斌,彭立明,丁文江.润滑条件下短纤维增强镁基复合材料的摩擦磨损行为研究[J].摩擦学学报,2010,30(06):537-542.DOI:10.16078/j.tribology.2010.06.013.

[47]曾小勤,吴玉娟,彭立明,林栋樑,丁文江,彭赢红.Mg-Gd-Zn-Zr合金中的LPSO结构和时效相[J].金属学报,2010,46(09):1041-1046.

[48]丁文江,吴玉娟,彭立明,曾小勤,林栋樑,陈彬.高性能镁合金研究及应用的新进展[J].中国材料进展,2010,29(08):37-45+36.

[49]张亮,王迎新,彭立明,丁文江.镁合金金属型高铝矾土涂料阻燃性的研究[J].特种铸造及有色合金,2010,30(02):134-137+93.

[50]张亮,王迎新,彭立明,丁文江.镁合金金属型铸造涂料流变性能的研究[J].铸造,2009,58(10):1041-1044.

[51]余伟阳,唐壁玉,彭立明,丁文江.α-Mg₃Sb₂的电子结构和力学性能[J].物理学报,2009,58(S1):216-223.

[52]常建卫,郭兴伍,彭立明,丁文江,彭颖红.250℃时效处理对Mg-10Gd-3Y-0.4Zr稀土镁合金腐蚀行为的影响[J].腐蚀科学与防护技术,2009,21(02):88-90.

[53]许昊,彭立明,安拥军,丁文江.PLC在差压铸造设备气路控制系统中的应用[J].特种铸造及有色合金,2009,29(02):141-143+94.

[54]陈广森,吴国华,王迎新,彭立明,丁文江.镁合金陶瓷型精密铸造工艺及界面反应的研究[J].铸造,2009,58(01):60-63.

[55]章桢彦,彭立明,曾小勤,丁文江.Effects of Cu and Mn on mechanical properties and damping capacity of Mg-Cu-Mn alloy[J].Transactions of Nonferrous Metals Society of China,2008,18(S1):55-58.

[56]常建卫,郭兴伍,彭立明,丁文江,彭颖红.Characterization of anodic coating formed on Mg-3Nd-0.2Zn-0.4Zr Mg alloy in alkaline electrolyte[J].Transactions of Nonferrous Metals Society of China,2008,18(S1):318-322.

[57]蒋海燕,付彭怀,彭立明,周素洪,翟春泉,丁文江.Mg-3Nd-0.2Zn-0.4Zr合金的显微组织与力学性能[J].特种铸造及有色合金,2008(S1):254-258.

[58]丁文江,彭立明,付彭怀,何上明,陈彬,郭兴伍,曾小勤.高性能镁合金及其成形加工技术与应用研究进展[J].新材料产业,2008(02):58-63.

[59]王渠东,林金保,彭立明,陈永军.往复挤压变形对ZK60镁合金力学性能的影响[J].金属学报,2008(01):55-58.

[60]常建卫,郭兴伍,付彭怀,彭立明,丁文江.Relationship between heat treatment and corrosion behaviour of Mg-3.0%Nd-0.4%Zr magnesium alloy[J].Transactions of Nonferrous Metals Society of China,2007(06):1152-1157.

[61]林金保,彭立明,王渠东,周阳,丁文江.Influence of solidification conditions on mechanical properties of Mg-10Gd-3Y-0.5Zr magnesium alloy[J].Transactions of Nonferrous Metals Society of China,2007(S1):368-371.

[62]曾一文,彭立明,毛协民,丁文江.二氟甲烷在镁合金熔炼保护的研究[J].特种铸造及有色合金,2005(07):406-407+382.

[63]曾小勤,丁文江,姚正裔,彭立明,卢晨.Mg-Zn-Al系合金组织和力学性能[J].上海交通大学学报,2005(01):46-51.DOI:10.16183/j.cnki.jsjtu.2005.01.011.

[64]彭立明,曾小勤,朱燕萍,王渠东,丁文江.一种新型镁合金的开发及其应用[J].有色金属加工,2003,32(02):18-22.

[65]彭立明,曾小勤,朱燕萍,丁文江.固溶处理对AM60B+xRE及AZ91D+xRE镁合金性能的影响[J].材料研究学报,2003(01):97-106.

[66]曹幸,彭立明,曾小勤,朱燕萍,丁文江.稀土及固溶处理对AM60B合金组织和力学性能的影响[J].机械工程材料,2003(02):21-24.

[67]彭立明,毛协民,丁文江.自生复合Cu-Cr合金综合性能的热稳定性[J].中国有色金属学报,2002(02):309-314.DOI:10.19476/j.ysxb.1004.0609.2002.02.022.

[68]彭立明,毛协民,***,丁文江.基于数值模拟的定向连续铸造固液界面位置人工神经网络模型的研究[J].铸造,2001(11):683-686.

[69]彭立明,毛协民,温宏权.凝固工艺对自生复合Cu-Cr合金电车线综合性能的影响[J].功能材料,2001(02):158-160.

[70]彭立明,毛协民,温宏权.自生复合Cu-Cr合金的定向凝固特性[J].稀有金属材料与工程,2000(05):307-310.

[71]彭立明,毛协民,徐匡迪.Simulation and control model for interactions among process parameters of directional solidification continuous casting[J].Transactions of Nonferrous Metals Society of China,2000(04):449-452.

[72]彭立明,毛协民,陈定兴,钱荣华,徐宝根.CAE技术在2VQS机油滤清器支架压铸工艺中的应用[J].铸造,2000(03):160-163.

[73]邹启明,彭立明,温宏权,毛协民,王海江.铝杆上引连铸技术探讨[J].特种铸造及有色合金,1999(S1):95-96.

[74]彭立明,温宏权,邹启明,毛协民.自生复合Cu08Cr合金定向凝固过程研究[J].材料工程,1999(09):7-9.

[75]彭立明,张启勋.14英寸显像管玻壳锥凸模铸造工艺的优化设计[J].铸造技术,1998(05):3-5.

[76]温宏权,邹启明,彭立明,毛协民,侯旭.Directional Solidification of Cu-Cr Alloy[J].Rare Metals,1998(02):25-29.

[77]温宏权,邹启明,彭立明,毛协民,侯旭. Directional Solidification of Cu-Cr Alloy[J]. 稀有金属：英文版,1998,0(2).

发表中文会议文：

[1]陈娟; 邓南香; 王廷炎; 方浩澜; 彭立明. 基于微结构及成分波动调控FC/Pd/Mg-X薄膜氢致变色性能研究[C].中国稀土学会2022学术年会、第十四届中国包头·稀土产业论坛摘要集.2022:458.DOI:10.26914/c.cnkihy.2022.054430.

[2]StJohn, D H*; Hu, X; Sun, M; Peng, L; Dieringa, H. Recent developments in the application of the interdependence model of grain formation and refinement.International Symposium on Magnesium Technology, 2018, 2018-03-11 to 2018-03-15.

[3]袁灵洋,刘保良,彭立明. Cu元素对压铸Al-5.5Mg-0.7Mn合金组织与性能的影响[C].第十三届中国国际压铸会议暨第4届有色合金及特种铸造技术国际研讨会论文集.2018:48.DOI:10.26914/c.cnkihy.2018.010523.

[4]李学文,彭立明,郑飞燕. 搅拌摩擦加工含长周期有序结构的Mg-2.5Gd-1Zn-0.18Zr合金的显微组织研究[C].2013广东材料发展论坛——战略性新兴产业发展与新材料科技创新研讨会论文摘要集.[出版者不详],2013:224-225.

[5]Zheng, Feiyan*; Peng, Liming; Wu, Yujuan; Li, Xuewen; Zhang, Yu; Ding, Wenjiang. The Effect of Friction Stir Process (FSP) on the Microstructure and Mechanical Properties of Mg-Gd-Ag-Zr Alloy.6th International Light Metals Technology Conference (LMT 2013), 2013-07-24 to 2013-07-26.

[6]Luo, A A; Fu, P; Zeng, X; Peng, L; Hu, B; Sachdev, A K. Microstructure and mechanical properties of die cast magnesium-aluminum-tin alloys.Magnesium Technology 2013 - TMS 2013 Annual Meeting and Exhibition, 2013-03-03 to 2013-03-07.

[7]郑飞燕,彭立明,李学文. 搅拌摩擦加工对Mg-Gd-Ag-Zr合金组织和性能的影响[C].2013广东材料发展论坛——战略性新兴产业发展与新材料科技创新研讨会论文摘要集.2013:225-227.

[8]彭立明. 第12章新型合金材料-镁合金[C].中国新材料产业发展报告（2011）.2012:167-177+6.

[9]Peng Liming*; Hu Bin; Ding Wenjiang.Mechanical properties, aging behavior and microstructure evolution of Mg-Nd-Zn-Zr based magnesium matrix composite reinforced with alumina fibers.7^th International Conference on Processing and Manufacturing of Advanced Materials, 2011-08-01 to 2011-08-05.

[10]Tang, Ping Ying*; Zeng, Meng Xue; Li, Dong Lin; Tang, Bi Yu; Peng, Li Ming; Ding, Wen Jiang.Theoretical Investigation on Microstructure of the Novel 24R-type LPSO Phase in Mg₉₇Zn₁Y₂ Alloy.International Conference on Chemical Engineering and Advanced Materials, 2011-05-28 to 2011-05-30.

[11]Guo, Xingwu*; Wang, Shaohua; Yang, Haiyan; Peng, Liming; Ding, Wenjiang.Characterization of Ni-P/TiO₂ MMC coatings prepared by electroless plating process on Mg-Nd-Zn-Zr magnesium alloys.11^th International Conference in Asia of the International-Union-of-Materials-Research-Societies, 2010-09-25 to 2010-09-28.

[12]Fu, Penghuai*; Peng, Liming; Nie, J. F.; Jiang, Haiyan; Ma, Lan; Bourgeois, L..Ductility improvement of Mg-Nd-Zr cast alloy by trace addition of Zn.11^th International Conference in Asia of the International-Union-of-Materials-Research-Societies, 2010-09-25 to 2010-09-28.

[13]Wu, Y. J.*; Peng, L. M.; Zeng, X. Q.; Lin, D. L.; Ding, W. J.Formation of a Novel X Phase in Mg-Gd-Zn-Zr Alloy.7^th Pacific Rim International Conference on Advanced Materials and Processing, 2010-08-02 to 2010-08-06.

[14]Peng, L. M.*; Wang, Y. X.; Fu, P. H.; Ding, W. J.; Luo, A. A.; Verma, R.. Numerical Simulation and Process Development for Low Pressure Diecasting of Magnesium Alloy Wheels. 114^th Annual Metalcasting Congress, 2010-03-20 to 2010-03-23.

[15]Hu, Bin; Peng, Liming; Powel, Bob R.; Lukitsch, Michael J.; Sachdev, Anil K.. Dry Sliding Wear Behavior of AE44 Magnesium Alloy Reinforced with Saffil Alumina Fibers.Magnesium Technology Symposium 2010, 2010-02-14 to 2010-02-18.

[16]Hu, Bin; Peng, Liming; Powell, Bob R.; Sachdev, Anil K.. MECHANICAL PROPERTIES AND MICROSTRUCTURAL ANALYSIS OF AXJ530 MAGNESIUM ALLOY REINFORCED WITH ALUMINA FIBERS.Magnesium Technology Symposium 2010, 2010-02-14 to 2010-02-18.

[17]Zeng, Xiaoqin; Ding, Wenjiang; Wu, Yujuan; Peng, Liming.Precipitation Strengthening in Magnesium Alloys Containing Rare Earth Elements.Magnesium Technology Symposium 2010, 2010-02-14 to 2010-02-18.

[18]Chen, Bin; Zeng, Xiaoqin; Lin, Dongliang; Peng, Liming.Effect of extrusion temperature on the microstructure and mechanical properties of Mg₉₇Y₂Zn₁ alloy.Magnesium Technology Symposium 2009, 2009-02-15 to 2009-02-19.

[19]Wu, Yujuan; Zeng, Xiaoqin; Lin, Dongliang; Peng, Liming; Yuan, Guangyin; Ding, Wenjiang.Effects of solid solution heat treatment on the microstructures and mechanical properties of Mg_96.82Gd₂Zn₁Zr_0.18 alloy with the 14H-type LPSO structure.Magnesium Technology Symposium 2009, 2009-02-15 to 2009-02-19.

[20]Fan, L. K.; Peng, L. M.; Wang, R.; Dong, J.; Ding, W. J.Microstructures of the deforming zone in hot rolling AZ31 sheet .Magnesium Technology Symposium 2009, 2009-02-15 to 2009-02-19.

[21]Fu Penghuai; Peng Liming; Ma Lan; Jiang Haiyan; Zhai Chunquan.Microstructure and Mechanical properties of Extruded Mg-3Nd-0.2Zn-0.4Zr (wt. %) Alloy.Magnesium Technology Symposium 2009, 2009-02-15 to 2009-02-19.

[22]吴国华,付彭怀,彭立明等. 高性能镁合金研究应用现状与展望[C].2008中国铸造活动周论文集.2008:41-46.

[23]常建卫,郭兴伍,彭立明等. 250℃下时效时间对Mg-10Gd-3Y-0.4Zr稀土镁合金腐蚀行为的影响[C].2008年全国腐蚀电化学及测试方法学术交流会论文摘要集.2008:82.

[24]Peng, Liming*; Du, Lin; Jin, Li; Wang, Qudong; Ding, Wenjiang.Anisotropy of the damping capacity of rolled Mg-0.4Zn-0.6Zr (ZK01) alloy.Magnesium Technology Symposium 2008, 2008-03-09 to 2008-03-13.

[25]Chang Jian-Wei; Guo Xing-Wu; Fu Peng-Huai; Peng Li-Ming; Ding Wen-Jiang.Relationship between heat treatment and corrosion behaviour of Mg-3.0%Nd-0.4%Zr magnesium alloy.International Conference of Nonferrous Materials (ICNFM), 2007-11-25 to 2007-11-30.

[26]Lin Jin-bao; Peng Li-ming; Wang Qu-dong; Zhou Yang; Ding Wen-jiang.Influence of solidification conditions on mechanical properties of Mg-10Gd-3Y-0.5Zr magnesium alloy.International Conference of Nonferrous Materials (ICNFM), 2007-11-25 to 2007-11-30.

[27]Wu, Y. J.; Lin, D. L.; Zeng, X. Q.; Peng, L. M.; Ding, W. J..Formation of a lamellar 14H-type long period stacking ordered structure in an as-cast Mg-Gd-Zn-Zr alloy.Conference on Syntactic and Composite Foams held with Engineering International Conference, 2007-08 to 2007-08.

[28]丁文江,彭立明,付彭怀等. 高性能镁合金发展现状与趋势[C].第五届中国有色合金及特种铸造国际会议论文集.,2007:47-53.

[29]Fu P*; Peng L; Jiang H; Zhai C; Gao X; Nie J F.Zr-containing precipitates in Mg-3wtNd-0.2wtZn-0.4wtZr alloy during solutionTreatment at 540°C.2006 Beijing International Materials Week, 2006 BIMW - 2^nd International Conference on Magnesium, ICM 2006, 2006-06-25 to 2006-06-30.

[30]Ding, W. J.; Fu, P. H.; Peng, L. M.; Jiang, H. Y.; Zeng, X. Q.Study on the microstructure and mechanical property of high strength Mg-Nd-Zn-Zr alloy.Beijing International Materials Week, 2006-06-25 to 2006-06-30.

[31]Peng, Liming; Fu, Penghuai; Jiang, Haiyan; Zhai, Chunquan.Microstructure and mechanical properties of low pressure die cast AM50 magnesium alloy.Beijing International Materials Week, 2006-06-25 to 2006-06-30.

[32]Lin, Jinbao; Wang, Qudong; Peng, Liming; Zhou, Yang; Ding, Wenjiang.Effect of cooling rate on the microstructure and mechanical properties of ZK60 alloy.Beijing International Materials Week, 2006-06-25 to 2006-06-30.

[33]Zhang, Zhenyan; Peng, Liming; Zeng, Xiaoqin; Du, Lin; Ma, Lan; Ding, Wenjiang.Effects of extrusion on the mechanical properties and damping capacity of Mg-1.8Cu-0.5Mn alloy.Beijing International Materials Week, 2006-06-25 to 2006-06-30.

[34]Zhou, Yang; Peng, Liming; Wang, Qudong; Lin, Jinbao; Ding, Wenjiang.Influence of cooling rates on the dentrite morphology and hardness of the surface-chilled Mg-10Gd-3Y magnesium alloy.Beijing International Materials Week, 2006-06-25 to 2006-06-30.

[35]He, Shangming; Zeng, Xiaoqin; Peng, Liming; Guo, Xinwu; Chang, Jianwei; Ding, Wenjiang.Microstructure, mechanical properties, creep and corrosion resistance of Mg-Gd-Y-Zr(-Ca) alloys.Beijing International Materials Week, 2006-06-25 to 2006-06-30.

[36]Fu, Penghuai; Peng, Liming; Jiang, Haiyan; Zhai, Chunquan; Ga, X.; Nie, J. F. Zr-containing precipitates in Mg-3wt%Nd-0.2wt%Zn-0.4wt%Zr alloy during SolutionTreatment at 540 degrees C.Beijing International Materials Week, 2006-06-25 to 2006-06-30.

[37]Changa, Jianwei; Fu, Penghuai; Guo, Xingwu; Peng, Liming; Ding, Wenjiang.Effect of heat treatment on corrosion and electrochemical behaviors of Mg-3Nd-0.2Zn (wt. %) magnesium alloy.Beijing International Materials Week, 2006-06-25 to 2006-06-30.

[38]He, SM; Peng, LM; Zeng, XQ; Liu, LP; Wang, QD; Ding, WJ; Zhu, YP.Effects of variable La/Ce ratio on microstructure and mechanical properties of Mg-5Al-0.3Mn-1RE alloys.International Conference on Magnesium - Science, Technology and Applications, 2004-09-20 to 2004-09-24.

[39]Zeng, YW; Peng, LM; Mao, XM; Zeng, XQ; Ding, WJ.A new low GWP protective atmosphere containing HFC-152a for molten magnesium against ignition.International Conference on Magnesium - Science, Technology and Applications, 2004-09-20 to 2004-09-24.

[40]彭立明,曾小勤,朱燕萍等. 一种新型镁合金的开发及其应用[C].2002年材料科学与工程新进展（上）——2002年中国材料研讨会论文集.冶金工业出版社,2002:642-649.

[41]毛协民,彭立明,温宏权等. 强度与导电兼顾的自生复合电车线[C].第四届中国功能材料及其应用学术会议论文集.重庆仪表材料研究所,2001:1710-1713.

[42]毛协民,温宏权,彭立明等. 自生复合高强度电车线的研究[C].第一届国际机械工程学术会议论文集.机械工业出版社,2000:317.

[43]彭立明,邹启明,温宏权等. 单晶连铸技术的研究现状与展望[C].第三届中国功能材料及其应用学术会议论文集.《功能材料》编辑部,1998:422-424+432.

[44]彭立明,温宏权,毛协民等. 单晶连铸过程初始阶段引晶速率的研究[C].第三届中国功能材料及其应用学术会议论文集.《功能材料》编辑部,1998:425-428.

荣誉奖励：

主要荣誉：

1．2018年，第四批国家“万人计划”科技创新领军人才。

2．2017年，科技部创新人才推进计划创新领军人才。

3．2016年，国家重点研发计划首席科学家。

4．2014年，上海市优秀学术带头人。

5． 2011年，教育部新世纪优秀人才。

6．2012年，国家工程研究中心先进工作者。

7．2007年，入选上海市启明星人才计划（A类）。

8．2005年，入选上海市教委青年优秀后备人才。

主要获奖：

1、 2017年，高性能镁稀土合金材料及其关键应用技术，国防科学技术发明奖一等奖。

2、 2014年，高强耐热镁合金材料及其在航天航空领域应用技术开发，上海市技术发明奖一等奖，排名4。

3、 2011年，第12届中国青年科技奖，中组部/中科协/人保部。

4、 2010年，上海市技术发明一等奖，控形控性一体化高强韧镁稀土合金及其应用关键技术研究，排名1。

5、 2009年，含稀土高强度铸造镁合金及其制备方法（ZL200510030457.8），知识产权局中国优秀专利奖，排名3。

6、 2009年，高强度镁稀土合金及成型技术的研制，高等学校科学研究优秀成果奖技术发明奖二等奖，排名3。

7、 2007年，高性能耐热镁合金及其在汽车中的应用，上海市技术发明一等奖，排名6。

8、 2006年，高强度镁合金在国防工业中的应用研究，国防科学技术二等奖，排名4。

9、 2003年，阻燃镁合金及其应用关键技术研究，国家科技进步二等奖,，排名6。

媒体报道：

从农家娃到交大教授

——访2011年启明星（跟踪）入选者彭立明

2011年对即将步入不惑之年的上海交大青年教师彭立明（见图）而言是带来好运的年份，这年中他入选上海科技青年启明星（跟踪），年底他荣获第十二届中国青年科技奖（该奖项由中组部、国家人保部和中国科协每两年评选一次，每次入选者不超过100人），当年他还入选教育部“新世纪优秀人才支持计划”；再早一年的2010年，他以第一完成人获得了上海市技术发明一等奖。以我多年采访启明星的经验，这些成绩的取得者一定是一个有不一样的经历和追求的人。希望了解这位交大教师的心愿促成了此次启明星访问。

（一）

一周前，我在交大闵行校区材料学院B楼和彭立明面叙。彭给我的第一印象很好，个子较高，谈吐举止有礼，他仔细听了我对采访的想法后很配合地应我的要求先做了自己家世和经历的介绍。1972年出生的彭立明是四川重庆人，他的爷爷奶奶、外公外婆一辈家境尚好，家里有人教书，外公是黄埔军校的毕业生，外婆是小学教员；爷爷在解放前是一位私塾先生，解放后成份定富农，而这一切到了1949年后就成了给个人和家庭带来巨大麻烦的家庭出身问题，小彭父母这一辈因此受到了牵连，他们全家早早地就迁居农村务农为生。但虽在农村，彭家还是有重视读书的传统。小彭说他父母小时候的学习成绩都很好，但因家境变迁，爷爷死于50年代末开始的大饥荒年代，彭父13岁缀学挑起养家的担子，他干农活时仍设法自学，后参加技校招考，考到全县第一，因成份不好未能如愿。所以彭父的心愿就是自己的孩子今后一定要上学。

彭立明和小他六岁的弟弟从小在外公外婆家长大，他是78年上的小学，那时他的外公、外婆开始平反，但拨乱反正还刚刚开始。从小就因家庭成份受到另眼相待的彭家兄弟小时候没人和他们玩，他们从小就懂得只能靠读书靠自己争气来改变命运。彭立明至今感怀他小学的班主任王德芬老师：“王老师对家庭条件差、来自农村的孩子都很关心，她知道我家的情况后，不但没有歧视我，而且整个小学期间她一直关心我。由于我家离校很远，中午不可能回家吃饭，小学五年几乎每天中午都在她家吃饭。我们一个班级40个人有15人考上重点中学，她的三个小孩也都考上大学，家教也很好，给我们这些小孩子起了一个很好的榜样。”彭立明说后来他二十多年的求学过程中，教过他的老师很多，但令他印象最深的还就是这位小学的班主任王老师，至今只要回老家，他都会去看望王老师。

为了支持两个孩子读书，彭父外出打工，知道家境的小彭中学住读6年期间非常节俭，一个星期就用一元钱，他每个月从家里挑粮到学校换粮票。

因为成绩拔尖，加上班主任说了一句“上海交大不错”，彭立明就填报了交大计算机计专业，后来被调剂到材料工程系的铸造专业。当时不是出于本意，而被调剂到材料学院的学生不少。之所以说不是出于本意，一方面的原因也是当时的材料系在交大的地位不高，博士点也没有。但毕竟是从农村来的孩子，彭立明想得更多的还是要上好学，认真读书是唯一出路。“结果，读着读着就找到点感觉了”。

毕业时，本想早点就业的小彭因当时的就业形势不太好，企业大多数效益不好，这样就去考研。他选择了去西安的西北工业大学而非在交大读研，一方面的原因是觉得自己不是本地人（当时在上海的外地学生比例不高，校园里主要讲的都是他听不懂的上海话，让他觉得要融入这个城市不易），另外很主要的是西北工业大学的铸造专业是国内最好的，该校的凝固技术国家重点实验室出了三个院士。如此他就去了西安。“西工大的学风很好，当时交大学生中已经出现了经商的风气，读书已经不太纯粹了，但西安那里读书风气很好，自修的座位还得提前占位”。

但三年硕士的经历让小彭以更理性的视角来比较西安和上海。他意识到比起上海，在人的整体素质、环境卫生、讲究规则和国际化程度等方面，西安还是有很大差距，另外从发展的角度看，上海的机会更多一些。这样，他决定再回上海读博。他考取了时任上海市长的上海大学徐匡迪院士的博士，徐老师虽政务繁忙，但他对自己名下的学生都会从课题方向上给予指点，提出要求，每年都会和自己的学生见一两次面。为了方便徐老师，博士论文答辩一般就安排在市政府会议室。

（二）

博士毕业后的2000年，彭立明到了和一直有联系的交大材料与工程学院的丁文江教授门下做博士后研究。彼时，丁教授正在申请筹建轻合金精密成型国家工程研究中心，中心很快就获国家发改委批准，小彭正好参与了这个过程。他的博士后研究就主攻镁合金。博士后出站小彭就留了下来一直干到现在。彭立明的正式入职生涯是从交大材料学院的轻合金精密成型国家工程研究中心起步，主要从事“先进镁合金的材料设计与精密成型技术及应用”研究。十余年来，他先后承担和参与了二十余项重要研究项目或课题，先后发表学术论文130余篇，获得授权发明专利17项，他在这个中心从讲师做到教授，现在还兼任了中心的主任助理和液态成型室的主任。

彭立明给我介绍了他们这个中心的使命和特色：“重点是针对镁合金以及少量的铝合金进行材料设计和精密成形工艺研究。所谓材料设计是根据不同的需求而对材料的组份作重新设计，譬如有些材料要求强度高，有些则要求韧性强，或耐磨性强，满足这些要求要根据该性能对元素的不同比例要求，掺杂不同的元素，再经过一定的工艺条件使之变成不同的组织。它们之间的关系是：材料的性能决定于材料的组织，组织决定于组份和加工参数。”比如，大家通常的印象里，金属镁条是很容易燃烧的，但如果我们往镁里掺杂少量的稀土、钙、锶等元素，就能很好的提高金属镁的抗燃烧性，甚至即使超过材料沸点也不起燃。彭立明告诉我，这方面的研究结果已经在与国外的著名航空公司合作用于开发飞机上的航空座椅部件，民航非常关注的一个问题是安全性，燃烧是其重点。

说到中心近年来的一些有特色的工作，彭立明特别提到了他们这几年利用稀土元素在材料改性方面的尝试。“在设计高强度、耐高温、高韧性的材料方面，我们充分利用了稀土元素非常特殊的电子结构特点，稀土元素添加到镁里面能形成很丰富的微观组织。进一步我们再利用原子探针、透射电镜等，搞清楚稀土元素在镁里面的存在状态，以及这些存在状态（微结构）起了哪些作用，从而达以调控组织与性能的目的”。彭教授介绍说，稀土的电子结构使得它在很多地方有用途，在钢铁、铝合金里，在电子材料中，甚至在肥料里，添加稀土都会形成新的性状。现在用的最多的是在磁性材料中，在军事上的用途也很大。

（三）

从彭老师的介绍中，我知道是上海交大轻合金精密成型国家工程研究中心较早发现了稀土在镁合金里有很大的用途，他们不仅发现的早，而且做得比较系统，他们对所有的稀土元素在镁合金里的作用都做了系统研究，找出了比较有用的元素及其组合及相应的工艺，并且开发了稀土镁合金的四种合金，而且都有专利。但是尽管如此，彭立明认为，稀土与镁合金的作用机理方面还有不少需要进一步研究的课题。

彭立明说，除了材料改性，材料的成型技术（加工）也是他们中心的特色，“我们能把非常复杂的发动机缸体造出来，这除了所用材料很关键外，还涉及到合理的成型技术，所开发的V6型发动机缸体的制造模具是由37套模芯组织而成，必须充分考虑这么多的模芯的结构设计与组合顺序以及金属液体在由这些模芯所构成的复杂型腔中的流动行为和凝固顺序。成型技术包括液态成型和固态成型。我们的加工技术很有特色，在低压铸造、高压铸造、挤压铸造、等温挤压等方面，我们都有很好的技术创新”。

访谈中，彭立明多次提到他的导师丁文江教授领导的轻合金精密成型国家工程研究中心这个团队，目前该团队内教师编制25人，研究生70余人，还有外聘的10位工程师，中心有7个研究室（7个研究方向）。在彭立明看来，他们这个中心是一个真正意义上的团队，是一个目标明确、大家都有事干、非常和谐的团队。大家的共同目标就是把工程中心建成国际上最具影响力的镁合金材料研究团队和技术创新平台之一。

由于时间关系，关于这个团队的一些特色我们那天没有进一步展开，但我在采访前看了该中心的产品陈列室，而且我在四年多前曾经采访过该中心的另一位启明星（跟踪）获得者曾小勤，曾那时陪我看了他们位于松江的中心研发加工基地，再加上我也有幸认识该中心的创办者丁文江教授。以这样的有限接触和了解，尽管不能说我对这个中心有很多了解，但是从他们这个团队成员的素质，从他们源源不断的成果产出，不仅是一篇篇高质量论文，更有解决重大工程和关键设备急需的新材料和实现这些新材料的工艺创新，我相信每一个去过该中心产品陈列室的人会认同一点，这是一个立于技术前沿、能解决问题的团队，这种既能顶天又能立地的团队是目前我们相对最紧缺的。

关于这个团队的情况希望今后有机会在深入了解的基础上再给大家披露。这里也预祝彭教授能在自己钟爱的研发岗位上作出更多的贡献。

文章来源：《世界科学》 2012年06期