高世桥北京理工大学教授工程力学专家

专家信息：

高世桥，男，1961年出生于辽宁，博士，教授，博士生导师，享受国务院政府津贴，德国洪堡基金获得者。现任教于北京理工大学宇航科学技术学院。从事非线性结构动力学、冲击动力学及微机电技术研究。先后在国际、国内的重要学术刊物上发表学术论文80余篇，获多项国家、省部级奖。

教育经历：

1978年9月——1982年6月北京工业学院力学工程系本科学历

1982年9月——1985年6月北京工业学院力学工程系硕士研究生学历

1985年9月——1987年6月上海工业大学力学系博士研究生学历

1990年9月——1992年6月德国鲁尔大学土木工程系博士后

工作经历：

1987.12 上海工业大学博士毕业后，在北京理工大学任讲师；

1990.12-1992.11 获洪堡基金在德国鲁尔大学做博士后研究；

1992.11-1996.7 在北京理工大学机电学院力学工程系副教授；

1996.7-1999.12 在北京理工大学任教授；

1999.12-至今在北京理工大学机电学院力学工程系教授, 博士生导师；

2004 年9月至今德国鲁尔大学，土木工程系，客座教授。

主讲课程：

1、本科生《弹性力学》；

2、硕士研究生《非线性随机振动与抗振分析》；

3、硕士研究生《结构动力学》。

科学研究：

研究方向：

主要从事微机电技术，高速条件下的控制技术的研究。

科研项目：

1. 微机电系统在武器中应用的发展战略研究;

2. 微机电模块化引信的概念研究;

3. 弹侵彻混凝土目标的动力特性研究;

4. 结构非线性随机动力响应研究

主要成就：

高世桥教授多年来主要从事微机电系统技术、冲击动力学、一般结构动力学方面的研究。在“基于微机电技术（MEMS）的系统控制技术”、“大型结构在灾害性载荷作用下的动力特性、安全性及稳定性”、“结构非线性随机动力响应”、“现代设计方法”等方面取得了重大的成果。在自主创新方面，他提出了“极限密度”、“法向膨胀”、“崩落摩擦角”等多个概念和“缺陷单元法”、“随机子结构法”、“迭代线性化法”、“样本响应法”等多种方法。

在弹药技术、引信技术、冲击动力学、结构动力学方面的研究获部级科技进步奖七项，发表论文60余篇。获奖项目有：1、大型工业冷却塔壳体静动力稳定性及响应研究（二等奖）；2、引信动温度研究（二等奖）；3、引信机电一体化技术（二等奖）；4、弹目碰击时的受力函数研究（三等奖）；5大型结构非线性随机动力响应（AVH证书）；6、飞航导弹总体参数设计（三等奖）。论文中有10余篇被收录三大检索。

高教授适应时代的需要，努力从事材料冲击破坏动力学方面和结构安全动力学方面的研究。在相关的计算理论上取得突破，在“结构非线性随机动力响应”、“混凝土材料结构在冲击载荷作用下的破坏特性”方面取得了重大的成果，应用于混凝土工程和地下防卫攻势等方面，促进了相关民用和军用产业的发展。

1995年，北京理工大学领导大胆从科研第一线引入专业人才进行财务管理。在领导信任和期盼的目光中，高世桥走上了财务工作岗位，如今十年过去了，高教授也逐渐成长为一位杰出的理财专家，让财务更好的服务于高校科研和教学。他组织建立了资产经营体系，小康平台架构，核算、结算两个中心。初次从事财务工作时，他一方面做好基本的财务管理服务工作，另一方面又发挥自己的专业优势，配合教学科研进行财务上的调整。在科研经费的争取、管理和使用上，他表现出了杰出的才能。科研经费是开展科研工作的重要基础，目前国家及教育部科学基金项目等均采用自由申请，但所得科研经费只限于科学研究本身，而现行科研人员收入并不与其所承担的科研项目多少、完成质量的好坏以及贡献的大小直接挂钩，不利于科研成果产出的提高。面对这些问题，高世桥教授以专家的眼光认真思考对待，他重视科研成本核算，强调科学和据实列支，着眼科研的投入产出效益，提高了科研工作的效率。主张教学科研相辅相成，相得益彰，经济上相互支撑，成果上相互共享。他始终坚持教学和科研“两个中心”，争取为基层教学提供更多的基金，通过不断完善财务管理制度来促进提高教学工作者的积极性，同时以教学促进科研能力的提高。就这样，在这十个春秋里，他呕心沥血地工作着，每年为学校增收3000多万元，回收了1000多万的水电成本，并节约出了近1000平方米的科研空间。十年艰辛，他终于没有辜负领导的期望，将科研与财务管理这两样人们看来似乎没有多大联系的事业完美的结合在一起，实现了科研人力资源和物力资源最为合理和有效的配置。

发明专利：

发明公开：

[1]牛少华,高世桥,金磊,隋丽,刘海鹏,李梦梅,代俊,石庚辰. 用于弹体侵彻目标过程的磁电式发电机及发电方法及应用[P]. CN114709997A,2022-07-05.

[2]熊雷,高世桥,金磊,郭胜凯,杜学达. 一种电磁式风致驰振能量采集装置[P]. CN114499097A,2022-05-13.

[3]郭胜凯,高世桥,金磊,尹作宗,李泽章. 一种升频式压电-电磁俘能装置[P]. CN111628674A,2020-09-04.

[4]牛少华,高世桥,金磊,隋丽,刘海鹏,李梦梅,代俊,石庚辰. 磁电式发电机及其应用[P]. CN110829778A,2020-02-21.

[5]李泽章,高世桥,彭世刚,刘海鹏,金磊. 一种基于杠杆效应位移放大音叉式微机械陀螺仪[P]. CN110307832A,2019-10-08.

[6]刘海鹏,高世桥,高春晖,金磊,李泽章,彭世刚. 多模复合式上变频振动式环境能量采集器[P]. CN110289786A,2019-09-27.

[7]张希洋,高世桥,金磊,刘海鹏,牛少华,郭胜凯. 光伏-压电-电磁复合式俘能器[P]. CN109889096A,2019-06-14.

[8]郭胜凯,高世桥,金磊,刘海鹏,牛少华,张希洋. 静电-压电-电磁复合式俘能器[P]. CN109818522A,2019-05-28.

[9]刘峰,高世桥,郭建昌,牛少华. 一种复合梁结构的压阻式MEMS加速度传感器及封装装置[P]. CN109231155A,2019-01-18.

[10]高世桥,闫丽,金磊,张希洋,张广义. 一种多自由度上变频复合式振动俘能器及其应用[P]. CN108683359A,2018-10-19.

[11]刘海鹏,闫丽,高世桥,张广义,吴君汝. 一种多自由度上变频压电俘能器[P]. CN108566119A,2018-09-21.

[12]刘海鹏,高世桥,金磊,周潇雅,路俊虎. 一种基于汽车振动的俘能装置[P]. CN107465324A,2017-12-12.

[13]董新博,刘海鹏,高世桥,张广义,陈林雄. 一种小型电磁摆动式俘能器[P]. CN105703598A,2016-06-22.

[14]管延伟,高世桥,刘海鹏,李平. 变面积电容式双模态优化的音叉式微机械陀螺[P]. CN105352488A,2016-02-24.

[15]刘海鹏,高世桥,张广义,武丽森,谭杨康,王子文,王学敏. 一种基于能量采集电路的压电-电磁复合式俘能器[P]. CN105162357A,2015-12-16.

[16]张广义,高世桥,刘海鹏,武丽森,董新博,陈林雄. 一种压电-电磁复合式俘能器[P]. CN105141181A,2015-12-09.

[17]刘海鹏,武丽森,高世桥,张广义,谭杨康,王子文,王学敏,邱士起. 一种用于压电-电磁复合式俘能器的能量采集电路[P]. CN105099272A,2015-11-25.

[18]刘海鹏,高世桥,张广义,武丽森,李平. 一种压电-电磁复合式低频宽带俘能器[P]. CN104836478A,2015-08-12.

[19]刘宗宝,高世桥,牛少华,刘海鹏,管延伟. 一种侵彻过载信息实时处理半实物仿真系统[P]. CN104698866A,2015-06-10.

[20]王彩锋,牛少华,高世桥,刘海鹏,王华敏. 基于测力板的人致载荷测试系统[P]. CN103954393A,2014-07-30.

[21]高世桥,李平,金磊,刘海鹏,牛少华,姚峰林. 基于MEMS技术的压电-电磁复合式宽频俘能器[P]. CN103199738A,2013-07-10.

[22]李平,高世桥,金磊,牛少华,刘海鹏,姚峰林. 基于MEMS的动磁铁型电磁-压电复合式宽频俘能器[P]. CN103107739A,2013-05-15.

[23]姚峰林,高世桥,刘海鹏,牛少华,李平. 一种多悬臂宽频MEMS压电俘能器[P]. CN102931878A,2013-02-13.

[24]高世桥,梁新建,刘海鹏. 全顺向电容式微机械陀螺[P]. CN102042829A,2011-05-04.

发明授权：

[1]郭胜凯,高世桥,金磊,尹作宗,李泽章. 一种升频式压电-电磁俘能装置[P]. CN111628674B,2022-03-18.

[2]李泽章,高世桥,彭世刚,刘海鹏,金磊. 一种基于杠杆效应位移放大音叉式微机械陀螺仪[P]. CN110307832B,2021-04-09.

[3]刘峰,高世桥,郭建昌,牛少华. 一种复合梁结构的压阻式MEMS加速度传感器及封装装置[P]. CN109231155B,2020-07-07.

[4]刘海鹏,高世桥,金磊,周潇雅,路俊虎. 一种基于汽车振动的俘能装置[P]. CN107465324B,2020-05-08.

[5]高世桥,闫丽,金磊,张希洋,张广义. 一种多自由度上变频复合式振动俘能器及其应用[P]. CN108683359B,2019-10-15.

[6]刘海鹏,武丽森,高世桥,张广义,谭杨康,王子文,王学敏,邱士起. 一种用于压电-电磁复合式俘能器的能量采集电路[P]. CN105099272B,2018-05-15.

[7]董新博,刘海鹏,高世桥,张广义,陈林雄. 一种小型电磁摆动式俘能器[P]. CN105703598B,2018-04-10.

[8]张广义,高世桥,刘海鹏,武丽森,董新博,陈林雄. 一种压电-电磁复合式俘能器[P]. CN105141181B,2018-02-02.

[9]刘海鹏,高世桥,张广义,武丽森,谭杨康,王子文,王学敏. 一种基于能量采集电路的压电-电磁复合式俘能器[P]. CN105162357B,2017-12-26.

[10]刘宗宝,高世桥,牛少华,刘海鹏,管延伟. 一种侵彻过载信息实时处理半实物仿真系统[P]. CN104698866B,2017-10-24.

[11]刘海鹏,高世桥,张广义,武丽森,李平. 一种压电-电磁复合式低频宽带俘能器[P]. CN104836478B,2017-06-20.

[12]王彩锋,牛少华,高世桥,刘海鹏,王华敏. 基于测力板的人致载荷测试系统[P]. CN103954393B,2016-02-10.

[13]高世桥,李平,金磊,刘海鹏,牛少华,姚峰林. 基于MEMS技术的压电-电磁复合式宽频俘能器[P]. CN103199738B,2015-07-15.

[14]李平,高世桥,金磊,牛少华,刘海鹏,姚峰林. 基于MEMS的动磁铁型电磁-压电复合式宽频俘能器[P]. CN103107739B,2015-04-15.

[15]姚峰林,高世桥,刘海鹏,牛少华,李平. 一种多悬臂宽频MEMS压电俘能器[P]. CN102931878B,2015-01-21.

[16]高世桥,梁新建,刘海鹏. 全顺向电容式微机械陀螺[P]. CN102042829B,2012-06-20.

实用新型：

[1]姚峰林,高世桥,刘海鹏,牛少华,李平. 一种多悬臂宽频MEMS压电俘能器[P]. CN203278696U,2013-11-06.

论文专著：

出版专著：

1、《微振动俘能技术》，高世桥; 刘海鹏; 金磊; 牛少华，.中国科学技术出版社, 2016.。

2、《混凝土侵彻力学》，高世桥，.中国科学技术出版社, 2013。

3、《微机电系统力学》，高世桥，刘海鹏著国防工业出版社，2008

4、《毛细力学》，高世桥，刘海鹏著，科学出版社, 2010

发表部分英文论文：

[1]Yin, Zuozong; Gao, Shiqiao*; Jin, Lei; Sun, Yaoqiang; Wu, Qinghe; Zhang, Xiyang; Guo, Shengkai. A dual impact driven frequency up-conversion piezoelectric energy harvester for ultralow-frequency and wide-bandwidth operation.Sensors and Actuators A: Physical , 2021, 331: 112961.

[2]Yin, Zuozong; Gao, Shiqiao*; Jin, Lei; Guo, Shengkai; Wu, Qinghe; Li, Zezhang. A shoe-mounted frequency up-converted piezoelectric energy harvester.Sensors and Actuators A: Physical , 2021, 318: 112530.

[3]Li, Zezhang; Gao, Shiqiao; Jin, Lei; Liu, Haipeng; Niu, Shaohua. Micromachined Vibrating Ring Gyroscope Architecture with High-Linearity, Low Quadrature Error and Improved Mode Ordering. Sensors, 2020, 20(15): 4327.

[4]Jin, Lei; Gao, Shiqiao; Zhang, Xiyang; Wu, Qinghe.Output of MEMS Piezoelectric Energy Harvester of Double-Clamped Beams with Different Width Shapes.Materials, 2020, 13(10): 2330.

[5]Xiao, Lijun; Li, Shi; Song, Weidong*; Xu, Xiao; Gao, Shiqiao. Process-induced geometric defect sensitivity of Ti-6Al-4V lattice structures with different mesoscopic topologies fabricated by electron beam melting. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2020, 778: 139092.

[6]Jin, Lei; Gao, Shiqiao*; Zhang, Xiyang.The effect of the beam shapes on the doubly-clamped piezoelectric energy harvester.Applied Mathematics and Mechanics (English Edition ), 2019, 40(9): 1361-1374.

[7]Li, Zezhang; Gao, Shiqiao*; Jin, Lei; Liu, Haipeng; Guan, Yanwei; Peng, Shigang. Design and Mechanical Sensitivity Analysis of a MEMS Tuning Fork Gyroscope with an Anchored Leverage Mechanism.Sensors, 2019, 19(16): 3455.

[8]Zhang Guangyi*; Gao Shiqiao; Liu Haipeng; Zhang Wenwu. Design and performance of hybrid piezoelectric-electromagnetic energy harvester with trapezoidal beam and magnet sleeve.Journal of Applied Physics, 2019, 125(8): 084101.

[9]Xu Xiao; Gao Shiqiao; Zhang Dongmei; Niu Shaohua*; Jin Lei; Ou Zhuocheng. Mechanical behavior of liquid nitrile rubber-modified epoxy resin: Experiments, constitutive model and application.International Journal of Mechanical Sciences, 2019, 151: 46-60.

[10]Zhou, Xiaoya; Gao, Shiqiao*; Jin, Lei; Liu, Haipeng; Li, Ping.Effects of changing PZT length on the performance of doubly-clamped piezoelectric energy harvester with different beam shapes under stochastic excitation. Microsystem Technologies, 2018, 24(9): 3799-3813.

[11]Xu, Xiao*; Gao, Shiqiao; Ou, Zhuocheng; Ye, Haifu.Mechanical Behavior of Liquid Nitrile Rubber-Modified Epoxy Resin under Static and Dynamic Loadings: Experimental and Constitutive Analysis.Materials, 2018, 11(9): 1565.

[12]Cui, Yan*; Yu, Menglin; Gao, Shiqiao; Kong, Xiangxin; Gu, Wang; Zhang, Ran; Liu, Bowen.Fabrication and characterization of a piezoelectric energy harvester with clamped-clamped beams.AIP Advances, 2018, 8(5): 055028.

[13]Zhang Xiyang; Gao Shiqiao; Li Dongguang; Jin Lei; Wu Qinghe; Liu Feng.Frequency up-converted piezoelectric energy harvester for ultralow-frequency and ultrawide-frequency-range operation.Applied Physics Letters, 2018, 112(16): 163902.

[14]Zhou Xiaoya; Gao Shiqiao*; Liu Haipeng; Jin Lei. Nonlinear Hybrid Piezoelectric and Electromagnetic Energy Harvesting Driven by Colored Excitation.Energies, 2018, 11(3): 498.

[15]Li Ping*; Gao Shiqiao; Cong Binglong.Theoretical modeling, simulation and experimental study of hybrid piezoelectric and electromagnetic energy harvester.AIP Advances, 2018, 8(3): 035017.

[16]Liu, Feng*; Gao, Shiqiao; Niu, Shaohua; Zhang, Yan; Guan, Yanwei; Gao, Chunhui; Li, Ping. Optimal design of high-g MEMS piezoresistive accelerometer based on Timoshenko beam theory.Microsystem Technologies, 2018, 24(2): 855-867.

[17]Li, Ping*; Gao, Shiqiao; Zhou, Xiaoya; Liu, Haipeng. On the performances of a nonlinear hybrid piezoelectric and electromagnetic energy harvester.Microsystem Technologies, 2018, 24(2): 1017-1024.

[18]Zhang, Dongmei*; Gao, Shiqiao; Niu, Shaohua; Liu, Haipeng.A PREDICTION METHOD FOR LOAD DISTRIBUTION IN THREADED CONNECTIONS.Journal of Theoretical and Applied Mechanics, 2018, 56(1): 157-168.

[19]Zhang, Dongmei*; Gao, Shiqiao; Liu, Haipeng; Liu, Zongbao; Niu, Shaohua. Real-time numerical calculation for penetration depth of projectiles into concrete targets.Mechanics Based Design of Structures and Machines, 2018, 46(4): 520-531.

[20]Gao Chunhui*; Gao Shiqiao; Liu Haipeng; Jin Lei; Lu Junhu; Li Ping. Optimization for output power and band width in out-of-plane vibration energy harvesters employing electrets theoretically, numerically and experimentally.Microsystem Technologies, 2017, 23(12): 5759-5769.

[21]Li Ping*; Gao Shiqiao; Zhou Xiaoya; Liu Haipeng; Shi Jitao. Analytical modeling, simulation and experimental study for nonlinear hybrid piezoelectric-electromagnetic energy harvesting from stochastic excitation.Microsystem Technologies, 2017, 23(12): 5281-5292.

[22]Jin, Lei; Gao, Shiqiao*; Zhou, Xiaoya; Zhang, Guangyi.The effect of different shapes of cantilever beam in piezoelectric energy harvesters on their electrical output.MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2017, 23(10): 4805-4814.

[23]Gao Chunhui; Gao Shiqiao; Liu Haipeng*; Jin Lei; Lu Junhu. Electret Length Optimization of Output Power for Double-End Fixed Beam Out-of-Plane Electret-Based Vibration Energy Harvesters.Energies, 2017, 10(8): 1122.

[24]Zhang, Guangyi*; Gao, Shiqiao; Liu, Haipeng; Niu, Shaohua. A low frequency piezoelectric energy harvester with trapezoidal cantilever beam: theory and experiment.MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2017, 23(8): 3457-3466.

[25]Zhang Dongmei*; Gao Shiqiao; Niu Shaohua; Liu Haipeng. Study on collision of threaded connection during impact. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2017, 106: 133-145.

[26]Yao, Fenglin*; Meng, Wenjun*; Gao, Shiqiao; Zhao, Jie; She, Zhanjiao; Yin, Hang.Research on the master-slave compound multi-cantilever piezoelectric energy harvester.Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems, 2017, 23(4): 1027-1044.

[27]Shiqiao Gao; Guangyi Zhang; Lei Jin; Ping Li; Haipeng Liu. Study on characteristics of the piezoelectric energy-harvesting from the torsional vibration of thin-walled cantilever beams. Microsystem Technologies, 2017, 6., ISSN 0946-7076.

[28]Zhou Xiaoya; Gao Shiqiao; Liu Haipeng*; Guan Yanwei. Effects of introducing nonlinear components for a random excited hybrid energy harvester.Smart Materials and Structures, 2017, 26(1): 015008.

[29]Lei Jin; Shiqiao Gao; Xiaoya Zhou; Guangyi Zhang.The effect of different shapes of cantilever beam in piezoelectric energy harvesters on their electrical output.Microsystem Technologies, 2016, 10.

[30]Dongmei Zhang; Shiqiao Gao; Xiao Xu.A new computational method for threaded connection stiffness.Advances in Mechanical Engineering, 2016, 8(2): 1-9.

[31]Zhang, Guangyi*; Gao, Shiqiao; Liu, Haipeng.A utility piezoelectric energy harvester with low frequency and high-output voltage: Theoretical model, experimental verification and energy storage.AIP Advances, 2016, 6(9): 095208.

[32]Li, Changlong; Gao, Shiqiao; Niu, Shaohua*; Liu, Haipeng.Study of Intrinsic Dissipation Due to Thermoelastic Coupling in Gyroscope Resonators.Sensors, 2016, 16(9): 1445.

[33]Niu, Shaohua*; Wang, Caifeng; Gao, Shiqiao.A novel crowd random loads model for pedestrians walking on footbridge. Archive of Applied Mechanics, 2016, 86(7): 1369-1381.

[34]Guan, Yanwei; Gao, Shiqiao; Liu, Haipeng*; Jin, Lei; Zhang, Yaping.Vibration Sensitivity Reduction of Micromachined Tuning Fork Gyroscopes through Stiffness Match Method with Negative Electrostatic Spring Effect. Sensors, 2016, 16(7): 1146.

[35]Li, Changlong; Gao, Shiqiao; Niu, Shaohua*; Liu, Haipeng.Thermoelastic coupling effect analysis for gyroscope resonator from longitudinal and flexural vibrations.Microsystem Technologies, 2016, 22(5): 1029-1042.

[36]Guan, Yanwei; Gao, Shiqiao; Liu, Haipeng*; Jin, Lei; Niu, Shaohua.Design and Vibration Sensitivity Analysis of a MEMS Tuning Fork Gyroscope with an Anchored Diamond Coupling Mechanism.Sensors, 2016, 16(4): 468.

[37]Li, Ping*; Gao, Shiqiao; Cai, Huatong; Wu, Lisen.Theoretical analysis and experimental study for nonlinear hybrid piezoelectric and electromagnetic energy harvester.Microsystem Technologies, 2016, 22(4): 727-739.

[38]Guan, Yanwei*; Gao, Shiqiao; Jin, Lei; Cao, Lianmin.Design and vibration sensitivity of a MEMS tuning fork gyroscope with anchored coupling mechanism.Microsystem Technologies, 2016, 22(2): 247-254.

[39]Guan, Yanwei*; Gao, Shiqiao; Liu, Haipeng; Niu, Shaohua.Acceleration sensitivity of tuning fork gyroscopes: theoretical model, simulation and experimental verification.Microsystem Technologies, 2015, 21(6): 1313-1323.

[40]Hai Peng, Liu; Shi Qiao, Gao; Lei, Jin.Study on the Energy Harvesting Performance of PE Cantilever Beam.Key Engineering Materials, 2015, 645-646: 1189-1194.

[41]Cui, Yan*; Zhang, Qunying; Yao, Minglei; Dong, Weijie; Gao, Shiqiao.Vibration piezoelectric energy harvester with multi-beam.AIP Advances, 2015, 5(4): 041332.

[42]Li, Ping*; Gao, Shiqiao; Cai, Huatong.Modeling and analysis of hybrid piezoelectric and electromagnetic energy harvesting from random vibrations.Microsystem Technologies, 2015, 21(2): 401-414.

[43]Cai, Huatong; Gao, Shiqiao; Li, Ping; Wang, Huamin.Design and experimental study of hybrid piezoelectric and electromagnetic harvester.Piezoelectrics & Acoustooptics, 2015, 37(2): 248.

[44]Li, Ping; Gao, Shiqiao; Cai, Huatong; Cui, Yan; Li, P.*.Design, fabrication and performances of MEMS piezoelectric energy harvester.International Journal of Applied Electromagnetics and Mechanics, 2015, 47(1): 125-139.

[45]Li, Ping*; Gao, Shiqiao; Cai, Huatong; Cui, Yan.Design, fabrication and performances of MEMS piezoelectric energy harvester.International Journal of Applied Electromagnetics and Mechanics, 2015, 47(1): 125-139.

[46]Zongbao Liu; Shiqiao Gao; Haipeng Liu; Dongmei Zhang; Lei He.Nonlinear adaptive noise-induced algorithm and its application in penetration signal.Measurement, 2014, 58: 556-565.

[47]Yao Fenglin; Gao Shiqiao; Zhao Jie; Liu Haipeng; Niu Shaohua; Jin Lei.Two-stage decoupled micro-machined gyroscope and noncontact vibration test.Proceedings of the Institution of Mechanical Engineers - Part N: Journal of Nanoengineering and Nanosystems , 2014, 228(3): 139-145.

[48]Li, Ping*; Gao, Shiqiao; Cai, Huatong; Wang, Huamin.Coupling effect analysis for hybrid piezoelectric and electromagnetic energy harvesting from random vibrations.International Journal of Precision Engineering and Manufacturing, 2014, 15(9): 1915-1924.

[49]Li, Ping*; Gao, Shiqiao; Niu, Shaohua; Liu, Haipeng; Cai, Huatong.An analysis of the coupling effect for a hybrid piezoelectric and electromagnetic energy harvester.Smart Materials and Structures, 2014, 23(6): 065016.

[50]Xing Hui Chen; Shi Qiao Gao.An Elevation Cosine Derivation Based Updating STAP Method for Non-Sidelooking Uniform Linear Array.Applied Mechanics and Materials, 2014, 556-562: 3662-3665.

[51]Xing Hui Chen; Shi Qiao Gao.A Space Time Autoaggressive Method Based on Parameters Estimation for Airborne MIMO Radar.Applied Mechanics and Materials, 2014, 556-562: 4496-4500.

[52]Xing Hui Chen; Shi Qiao Gao.Joint Doa-Frequency Estimation for Coherent Signal Identification.Applied Mechanics and Materials, 2014, 556-562: 4875-4879.

[53]Liu, Haipeng; Gao, Shiqiao; Zhou, Yong; Jin, Lei; He, Yunli; Liu, H.*.Optical measurement and analysis of dynamic characteristics of micro-comb structure.Nanotechnology and Precision Engineering, 2014, 12(1): 22-26.

[54]Li, Ping*; Gao, Shiqiao; Liu, Haipeng; Liu, Jun; Shi, Yunbo.Effects of package on the performance of MEMS piezoresistive accelerometers.MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2013, 19(8): 1137-1144.

[55]Fenglin Yao*; Shiqiao Gao; Jie Zhao; Haipeng Liu; Shaohua Niu; Lei Jin; Oukil Souad; Boudjemai Abdelmadjid; Boughanmi Nabil.The vibration and measurement of driving mode of the two-stage decoupled micro-machined gyroscope.International Journal on Smart Sensing and Intelligent Systems, 2013, 6(4): 1599-1616.

[56]Liu, Haipeng; Gao, Shiqiao; Jin, Lei; Liu, H.-P.*.Numerical simulation and experiment on penetration of projectile into multi-layer concrete target.Acta Armamentarii, 2013, 34(SUPPL.1): 68-72.

[57]Niu, Shaohua; Gao, Shiqiao; Wang, Dong; Kasperski, Michael; Agu, Ecevit; Niu, S.-H.*.Dynamic characteristics of the coupled system of footbridge and human.Journal of Beijing Institute of Technology, 2013, 22(3): 285-290.

[58]Zhang, Dong-Mei*; Gao, Shi-Qiao; Liu, Hai-Peng.Theory and applications of segment wavelet filtering.Transactions of Beijing Institute of Technology, 2013, 33(SUPPL.2): 117-120.

[59]Niu, Shaohua; Gao, Shiqiao; Jin, Lei; Niu, S.-H.*.A model based on acceleration for calculation of projectile penetration depth.Acta Armamentarii, 2012, 33(SUPPL2): 225-229.

[60]Liu, Haipeng*; Gao, Shiqiao; Shen, Li; Jin, Lei.Simulation and experiment of the oblique penetration of projectile into concrete target.Acta Armamentarii, 2012, 33(SUPPL2): 257-260.

[61]Li, Ping; Gao, Shiqiao; Jin, Lei; Shi, Yunbo; Li, P.*.Effects of package materials on performances of a piezoresistive MEMS accelerometer.Explosion and Shock Waves, 2012, 32(6): 623-628.

[62]Gao S, Niu S, Jin L ,Micro Size Effect of Silicon Material on the Performance of Micro-Gyroscope. Advanced Science Letters,2012;178-181

[63]Zhou, Yong*; Sun, Haigang; Gao, Shiqiao; Niu, Shaohua.Videometrics-based Detection of Vibration Linearity in MEMS Gyroscope.International Journal of Computational Intelligence Systems, 2011, 4(3): 321-328.

[64]Liu, Haipeng*; Gao, Shiqiao; Niu, Shaohua; Jin, Lei.Analysis on the adhesion of micro-comb structure in MEMS.International Journal of Applied Electromagnetics and Mechanics, 2010, 33(3-4): 979-984.

[65]Xin Jian, Liang; S Q , Gao.A MEMS Capacitive Gyroscope with Improved Reliability.Materials Science Forum, 2009, 628-629: 341-346.

[65]Gao, Shiqiao.A fuzzy model of the penetration resistance ofconcrete targets.International Journal of Impact Engineering, , 2009, 36(4):644-649

[66]Gao Shi-qiao; Jin Lei; Kasperski, M.; Liu Hai-peng; Li Ming-hui.Nonlinear analysis of a structure loaded by a stochastic excitation.Applied Mathematics and Mechanics (English Edition ), 2007, 28(11): 1479-1485.

[67]Shiqiao Gao; Haipeng Liu; Keijie Li; Huang, FL; Jin, L.Normal expansion theory for penetration of projectile against concrete target.Applied Mathematics and Mechanics (English Edition ), 2006, 27(4): 485-492.

[68]Gao Shiqiao; Jin Lei; Liu Haipeng.Dynamic response of a projectile perforating multi-plateconcrete targets.International Journal of Solids and Structures, 2004, 41(18-19): 4927-4938.

[69]高世桥 王宝兴DYNAMICAL CALCULATION AND ANALYSIS ON PENETRATION OF TARGET PLATES BY TRUNCATED CONICAL PROJECTILES 《Applied Mathematics and Mechanics》(English Edition) 1986年第11期

发表中文期刊论文：

[1]郭松林,高世桥,李泽章,李云彪.弹引系统攻角侵彻混凝土仿真与试验研究[J].兵器装备工程学报,2022,43(01):135-139+205.

[2]张冬梅,高世桥.侵彻过程中弹引螺纹连接结构振动特性研究[J].爆炸与冲击,2022,42(03):66-77.

[3]付德义,高世桥,孔令行,贾海坤.基于相关向量信息熵的风电机组功率曲线构建方法研究[J].太阳能学报,2022,43(05):252-259.

[4]张冬梅,高世桥,李世中.侵彻过程中弹引系统的冲击传递特性研究[J].兵器装备工程学报,2020,41(12):27-34.

[5]戴政豪,高世桥,李泽章,张铱翔.基于包络预测的动态阈值计层算法[J].兵器装备工程学报,2020,41(12):53-56.

[6]徐萧,金磊,黄莎玲,高世桥,张虎生.飞片冲击载荷在环氧树脂/印刷电路板/环氧树脂界面处的传递特性[J].兵工学报,2020,41(09):1817-1825.

[7]彭世刚,刘海鹏,高世桥,金磊,李泽章.杠杆耦合式微机械陀螺仪特性分析[J].压电与声光,2020,42(01):118-122.

[8]高世桥,闫丽,金磊,张希洋,张广义.非线性双端固支梯形梁压电俘能器结构设计与特性分析[J].农业机械学报,2019,50(07):398-405.

[9]刘峰,高世桥,牛少华,刘海鹏,肖东岳,杨旭.基于Jacobian矩阵的牛顿迭代法惠斯通电桥调零[J].传感技术学报,2019,32(01):96-99.

[10]闫丽,高世桥,刘海鹏,张广义.双端固支式压电俘能器的特性研究[J].压电与声光,2018,40(03):370-373+378.

[11]张广义,金磊,高世桥,刘海鹏,牛少华.双端固支梯形梁压电俘能器机电耦合模型与试验分析[J].北京理工大学学报,2018,38(06):600-605.

[12]路俊虎,金磊,高世桥,高春晖,吕庆山,刘海鹏.基于驻极体静电俘能器的优化设计与实验测试[J].工程科学学报,2018,40(04):492-499.

[13]李长龙,高世桥,牛少华,刘海鹏.高冲击下引信用固态钽电容的参数变化[J].爆炸与冲击,2018,38(02):419-425.

[14]王彩锋,高世桥,牛少华,刘海鹏.行人SMD模型参数对人群-结构耦合动力特性的影响[J].振动与冲击,2018,37(03):91-97.

[15]董新博,刘海鹏,陈林雄,高世桥.双端磁耦合式压电振动俘能器结构设计[J].压电与声光,2017,39(05):711-716.

[16]刘峰,张丹,熊磊,朱清慧,高世桥.基于神经元的瓦楞横切机实时控制系统设计[J].电机与控制应用,2017,44(10):19-24.

[17]徐萧,高世桥,牛少华,申丽,刘海鹏,欧卓成.灌封材料对侵彻过载下弹载器件的防护分析[J].兵工学报,2017,38(07):1289-1300.

[18]陈林雄,高世桥,董新博.基于材料疲劳的压电俘能器结构设计[J].压电与声光,2017,39(04):539-543.

[19]高春晖,高世桥,金磊,刘海鹏,牛少华.微机械结构中考虑边界滑移的穿孔平板压膜阻尼分析[J].北京理工大学学报,2017,37(06):562-566.

[20]张广义,高世桥,刘海鹏,李平,牛少华.一种低频压电俘能器准静态分析与能量收集试验[J].北京理工大学学报,2017,37(06):656-660.

[21]张冬梅,高世桥,刘海鹏,牛少华.基于加速度测试及模糊模型的弹丸侵彻混凝土深度实时预测方法[J].振动与冲击,2017,36(05):176-181+245.

[22]李长龙,高世桥,牛少华,刘海鹏.微谐振器纵向振动热弹性耦合分析[J].北京理工大学学报,2016,36(12):1237-1242.

[23]王彩锋,高世桥,刘海鹏,武丽森.压电-电磁复合式俘能器设计及能量收集测试[J].压电与声光,2016,38(06):902-905.

[24]李长龙,高世桥,牛少华,刘海鹏.高冲击环境对引信用储能电容性能的影响[J].兵工学报,2016,37(S2):16-22.

[25]邱士起,牛少华,高世桥.冲击载荷下石英晶体振荡器失效机理分析[J].兵工学报,2016,37(S2):96-100.

[26]刘宗宝,高世桥,牛少华,刘海鹏,管延伟.侵彻起爆控制系统的过载信息实时采集处理与侵深识别技术[J].北京理工大学学报,2016,36(10):1025-1030.

[27]谭杨康,高世桥,张广义.梯形梁压电俘能器的特性研究[J].压电与声光,2016,38(04):579-583.

[28]王彩锋,高世桥,谭杨康.基于人行通道测试系统的单人步行载荷建模[J].振动与冲击,2016,35(12):136-140.

[29]张冬梅,高世桥,牛少华.侵彻过程中螺纹连接结构的应力传递仿真分析[J].兵工学报,2015,36(S1):284-288.

[30]牛少华,王华敏,高世桥.人行桥随机行人载荷特性数值仿真研究[J].兵工学报,2015,36(S1):385-390.

[31]蔡华通,高世桥,李平,王华敏.压电-电磁复合式俘能器的设计与实验研究[J].压电与声光,2015,37(02):248-253+257.

[32]王华敏,牛少华,高世桥.单人步行荷载作用下多跨桥梁的动态特性分析[J].钢结构,2015,30(02):16-21.

[33]王彩锋,高世桥,金磊.Dynamic test methods for natural frequency of footbridge[J].Journal of Measurement Science and Instrumentation,2013,4(03):218-222.

[34]张冬梅; 高世桥; 牛少华.侵彻过程中螺纹连接结构的应力传递仿真分析.兵工学报, 2014, 36: 284-288.

[35]刘海鹏,高世桥,周勇,金磊,何运丽.微梳齿结构动态特性参量的光学测量与分析(英文)[J].纳米技术与精密工程,2014,12(01):22-26.

[36]姚峰林,高世桥,刘宗宝,刘海鹏,申丽.硬目标侵彻引信半实物系统测试[J].弹箭与制导学报,2013,33(03):52-55.

[37]张冬梅; 高世桥; 刘海鹏.分段小波滤波原理及应用.北京理工大学学报, 2013, 33: 117-120.

[38]高世桥,王栋,牛少华.人-结构耦合系统动态特性分析[J].北京理工大学学报,2013,33(03):235-238.

[39]李平,高世桥,金磊,石云波.封装材料对压阻式加速度传感器性能的影响[J].爆炸与冲击,2012,32(06):623-628.

[40]申丽,高世桥,金磊.弹体斜侵彻混凝土仿真分析[J].弹箭与制导学报,2012,32(06):61-64.

[41]周勇,孙海刚,高世桥.基于视觉测量的微陀螺振动系统线性度测试研究[J].北京理工大学学报,2012,32(08):790-794+837.

[42]姚峰林,高世桥,赵婕,高崇仁.Vibration test of micro machined gyroscope based on high speed photography and SURF[J].Journal of Beijing Institute of Technology,2012,21(02):179-184.

[43]姚峰林,高世桥.基于高速摄影动态测试微陀螺振动[J].光学精密工程,2012,20(01):165-170.

[44]姚峰林,高世桥,高崇仁.基于视频的塔式起重机振动测试[J].起重运输机械,2011(12):72-75.

[45]姚峰林,高世桥.微陀螺梳齿静电驱动力的计算方法[J].传感技术学报,2011,24(09):1265-1269.

[46]杜井庆,高世桥,罗创,姚峰林,刘海鹏.基于PID算法的控制量按任意函数变化的一种控制方法[J].仪器仪表学报,2011,32(06):1317-1323.

[47]刘海鹏,高世桥,金磊.弹丸贯穿有限厚混凝土靶板实验与仿真分析[J].兵工学报,2010,31(S1):59-63.

[48]刘海鹏,高世桥,金磊,郭雅君.弹侵彻混凝土靶面成坑的分阶段分析[J].兵工学报,2009,30(S2):52-56.

[49]李明辉,高世桥,刘海鹏,梁新建.Computation of Capacitance for MEMS Comb-Drive Structures[J].Journal of Beijing Institute of Technology,2009,18(01):1-5.

[50]刘海鹏,高世桥,金磊.3D Numerical Simulation of Projectile Penetration into Concrete Target[J].Journal of Beijing Institute of Technology,2008,17(04):379-383.

[51]高世桥,金磊,M.卡斯巴斯基,刘海鹏,李明辉.随机激励下结构的非线性分析[J].应用数学和力学,2007(11):1318-1324.

[52]刘鹏,高世桥,刘海鹏,李明辉.基于RACE++构架的嵌入式信号处理机[J].探测与控制学报,2007(S1):12-15+20.

[53]韩丽,高世桥.混凝土靶体尺寸对过载影响的数值研究[J].计算机仿真,2007(06):17-19+26.

[54]刘鹏,高世桥,刘海鹏,李明辉.基于MicroTCA构架的导航信号处理机[J].弹箭与制导学报,2007(02):242-244.

[55]韩丽,高世桥,李明辉,刘海鹏.弹丸垂直贯穿混凝土靶的数值研究[J].北京理工大学学报,2006(11):953-956.

[56]李明辉,高世桥.随机激励下结构的非线性分析[J].战术导弹技术,2006(05):34-38+43.

[57]曲大成,高世桥,刘玉树.分布式微机电系统的多主体控制[J].电子科技大学学报,2006(03):367-370.

[58]韩丽,高世桥,李明辉,刘海鹏.基于侵深公式的弹冲击混凝土目标的计算方法[J].北京理工大学学报,2006(05):393-396.

[59]韩丽,高世桥,李明辉,刘海鹏.弹侵彻半无限厚混凝土靶解析计算方法[J].弹箭与制导学报,2006(SA):1138-1139.

[60]曲大成,高茵,高世桥.高校投入产出效益与内部控制[J].北京理工大学学报(社会科学版),2006(02):113-117.

[61]高世桥,刘海鹏,李科杰,黄风雷,金磊.弹侵彻混凝土靶的法向膨胀理论[J].应用数学和力学,2006(04):431-438.

[62]高世桥,曲大成.高等学校投资效益的评价体系探讨[J].北京理工大学学报(社会科学版),2005(03):80-83.

[63]刘海鹏,高世桥.弹侵彻半无限厚混凝土靶的实验与分析[J].弹箭与制导学报,2005(S2):336-338+341.

[64]高世桥,曲大成.微机电系统(MEMS)技术的研究与应用[J].科技导报,2004(04):17-21.

[65]周勇,苏伟,高世桥.引信与火控系统的适配性分析[J].北京理工大学学报,2004(01):53-56.

[66]高世桥 ,金磊 ,刘海鹏.INVESTIGATION OF RANDOM RESPONSE OF ROTATIONALSHELL WHEN CONSIDERING GEOMETRICNONLINEAR BEHAVIOUR[J].Applied Mathematics and Mechanics(English Edition),2001(11):1268-1272.

[67]高世桥,金磊,H.J.尼曼,刘海鹏.考虑旋转壳几何非线性时的随机响应研究[J].应用数学和力学,2001(11):1142-1146.

[68]高世桥.引信模块化设计研究[J].兵工学报,2001(02):185-188.

[69]高世桥,Niemann H J.几何非线性对旋转壳随机响应的影响(英文)[J].Journal of Beijing Institute of Technology(English Edition),2001(01):23-28.

[70]高世桥,Niemann H J.受平稳强风载作用时旋转壳的非线性随机响应(英文)[J].Journal of Beijing Institute of Technology(English Edition),2001(01):29-33.

[71]金磊,高世桥,李文杰.MEMS固态引信硅微结构的力学分析与设计[J].兵工学报,2000(S1):45-46.

[72]李文杰,金磊,高世桥.用VC实现PC机对激光仪的通信控制[J].兵工自动化,2000(02):17-20.

[73]金磊,高世桥,李文杰.微加速度传感器硅微结构设计[J].传感器技术,2000(02):23-25.DOI:10.13873/j.1000-97872000.02.010.

[74]李文杰,金磊,高世桥.MEMS固态引信核心子系统的设计[J].探测与控制学报,2000(01):61-64.

[75]李文杰,贾云得,高世桥.立体视觉系统摄象机标定自动化[J].兵工自动化,2000(01):13-17.

[76]李志祥,庞海芍,高世桥.发挥经济核算在高校管理中的地位与作用[J].北京高等教育,1998(06):47-48.

[77]高世桥,尼曼ＨＪ,曲克波.考虑非线性时旋转壳的随机响应分析[J].Journal of Beijing Institute of Technology(English Edition),1997(02):180-186.

[78]高世桥,臧岩,谭惠民.引信典型支承板受冲击载荷作用时的非线性动力分析[J].北京理工大学学报,1996(04):395-400.

[79]高世桥,刘明杰,谭惠民.侵彻弹倾斜侵彻半无限混凝土目标时的动力分析[J].兵工学报,1995(04):46-50.

[80]高世桥,石庚辰,谭惠民,郭昭平.弹引系统以极大着角碰击半无限目标时的动力分析[J].北京理工大学学报,1994(04):359-365.

[81]高世桥,曲克波.弹-引系统以极大着角碰击薄靶板的动力学研究[J].兵工学报,1994(03):85-89.

[82]高世桥.具有物理非线性旋转壳的随机动力响应[J].Journal of Beijing Institute of Technology(English Edition),1994(01):25+19-25.

[83]高世桥,王宝兴.具有薄弱环节引信贯穿靶板时的动力分析[J].兵工学报,1991(02):93-96.

[84]高世桥 ,谭惠民 ,马宝华.引信安全系统的内禀理论[J].现代引信,1991(03):1-7.

[85]高世桥.有子午向随机缺陷旋转壳的随机响应研究[J].北京理工大学学报,1991(01):25-32.

[86]谭惠民,高世桥.圆柱壳受轴向冲击作用时的塑性动态屈曲研究[J].北京理工大学学报,1990(03):98-102.

[87]DOUG F.BRAUN,高世桥.电子保险和解除保险(装置)安全性设计和试验方法[J].现代引信,1989(04):19-23+40.

[88]Ken Willis ,高世桥.实现并验证电子保险/解除保险装置的方法[J].现代引信,1989(04):24-26.

[89]高世桥.国际合作专门小组会NUNN计划修正稿[J].现代引信,1989(04):46-50.

[90]高世桥 ,石岩.引信性能指标的综合评判[J].现代引信,1989(02):37-39+27.

[91]高世桥,卢文达.具有随机几何缺陷旋转壳的阵风响应分析[J].北京理工大学学报,1989(01):61-66.

[92]高世桥,卢文达.解决谐波间耦合动力问题的摄动法[J].应用数学和力学,1988(11):975-980.

[93]高世桥 ,卢文达.PERTURBATION METHOD TO SOLVE THE COUPLE PROBLEM AMONG HARMONIC WAVES[J].Applied Mathematics and Mechanics(English Edition),1988(11):1039-1044.

[94]高世桥,卢文达.具有非轴对称缺陷双曲冷却塔的动力有限元解[J].应用数学和力学,1988(06):475-480.

[95]高世桥 ,卢文达.DYNAMIC SOLUTION OF HYPERBOLIC COOLING TOWER WITH NONSYMMETRIC IMPERFECTIONS BY FINITE ELEMENT METHOD[J].Applied Mathematics and Mechanics(English Edition),1988(06):515-519.

[96]高世桥.具有轴对称几何缺陷圆柱壳的静力分析[J].力学与实践,1987(S1):24-28.

[97]高世桥.具有缓变轴对称几何缺陷圆柱壳的频率分析[J].应用力学学报,1987(04):97-101+131.

[98]卢文达,高世桥.旋转壳局部几何缺陷对其频率和振型的影响[J].应用数学和力学,1987(11):953-958.

[99]卢文达,高世桥.THE EFFECT LOCAL GEOMETRIC IMPERFECTIONS OF ROTATIONAL SHELL ON ITS NATURAL FREQUENCIES AND MODELS[J].Applied Mathematics and Mechanics(English Edition),1987(11):1013-1018.

[100]卢文达,高世桥.旋转壳局部几何缺陷对其系统固有频率的影响[J].上海力学,1987(03):1-12.

[101]高世桥,王宝兴.截锥形弹低中速贯穿薄靶板时的动力分析与计算[J].应用数学和力学,1986(11):1033-1038.

[102]王宝兴,高世桥.引信着靶时的动态分析与计算[J].北京工业学院学报,1986(03):89-96.

发表会议论文：

[1]路俊虎,金磊,高世桥,刘海鹏,高春晖. 驻极体静电俘能器的仿真分析和试验验证[C].中国力学大会-2017暨庆祝中国力学学会成立60周年大会论文集（B）.2017:1838-1842.

[2]刘海鹏,高世桥,金磊. 压电-电磁复合式俘能器的性能测试[C].中国力学大会-2017暨庆祝中国力学学会成立60周年大会论文集（B）.2017:1869-1875.

[3]Liu, Haipeng*; Jin, Lei; Gao, Shiqiao.Design and Test on the Nonlinear Piezoelectric-electromagnetic Hybrid Energy Harvesting Structure.2017 7^th International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), 2017-08-07 To 2017-08-11.

[4]Xiao Xu; Shiqiao Gao; Haipeng Liu; Shaohua Niu; Zhuocheng OU. High-speed collision analysis of pouring sealant byusing of nonlinear viscoelastic model.4^th International conference on protective structures, China, 2016-09-21 to 2016-09-23.

[5]张冬梅; 高世桥; 刘海鹏; 牛少华; 刘宗宝.Real-time calculation forstriking velocity based on penetration deceleration. 4^th International conference on protective structures, China, 2016-09-21 to 2016-09-23.

[6]徐萧; 高世桥; 牛少华; 申丽; 欧卓成.弹体内部结构的动态响应分析.第八届全国强动载效应及防护学术会议, 中国, 2016-07-15至2016-07-18.

[7]张冬梅; 高世桥; 刘海鹏; 牛少华.弹引螺纹连接刚度及引信安装频率研究.第八届全国强动载效应及防护学术会议, 中国, 2016-07-15至2016-07-18.

[8]Wang Caifeng*; Gao Shiqiao; Niu Shaohua; Liu Haipeng; Tan Yangkang. Analysis of Vertical Walking Force of Single Footstep.6^th International Conference on Manufacturing Science and Engineering (ICMSE), 2015-11-28 to 2015-11-29.

[9]Liu, Hai-peng*; Gao, Shi-qiao; Jin, Lei.Study on the output characteristics of piezoelectric-electromagnetic hybrid harvest structure.12^th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications (MESA), 2016 to 2016-08-31.

[10]Gao, Shiqiao*; Zhang, Guangyi; Jin, Lei; Li, Ping; Liu, Haipeng.Characteristics of the piezoelectric energy-harvesting from the torsional vibration of thin-walled cantilever beams.12^th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications (MESA), 2016 to 2016-08-31.

[11]Wang Caifeng*; Gao Shiqiao; Jin Lei; Chen Linxiong.Ambient Vibration Survey and Vibration Serviceability Evaluation on Footbridges. International Conference on Chemical, Material and Food Engineering (CMFE), 2015-07-25 to 2015-07-26.

[12]张冬梅,高世桥,刘海鹏. 侵彻过程中螺纹连接结构的应力传递仿真分析[C].第六届全国强动载效应及防护学术会议暨2014年复杂介质/结构的动态力学行为创新研究群体学术研讨会论文集.2014:232-237.

[13]刘海鹏,高世桥,金磊. 弹侵彻混凝土靶面成坑机理分析[C].第六届全国强动载效应及防护学术会议暨2014年复杂介质/结构的动态力学行为创新研究群体学术研讨会论文集.2014:283-287.

[14]Liu, Haipeng*; Gao, Shiqiao; Jin, Lei; He, Yunli. Corner Effect of Micro-Comb Capacitive Structure.15th Annual Conference of the Chinese-Society-of-Micro-Nano-Technology (CSMNT) / 4^th International Conference of the Chinese-Society-of-Micro-Nano-Technology (CSMNT), 2013-11-03 To 2013-11-06.

[15]刘海鹏,高世桥,金磊. 弹丸侵彻多层混凝土靶的数值模拟与实验[C].第五届全国强动载效应及防护学术会议暨复杂介质/结构的动态力学行为创新研究群体学术研讨会论文集.2013:322-329.

[16]Guan, Yanwei; Gao, Shiqiao; Shen, Li; He, Yunli.Study on effect of van der Waals force and Casimir force to microsystem.2013 2^nd International Conference on Measurement, Instrumentation and Automation, ICMIA 2013, China,Guangxi Zhuang Autonomous Region,Guilin, 2013-04-23 to 2013-04-24.

[17]Niu, Shaohua; Gao, Shiqiao; Du, Jingqing.A calculation model of pull-off force with edge-effect.2^nd International Conference on Opto-Electronics Engineering and Materials Research, OEMR 2013, 2013-10-19 to 2013-10-20.

[18]Liu, Haipeng; He, Yunli; Gao, Shiqiao; Tan, Yangkang; Jin, Lei.Structure simulation analysis of piezoelectric energy harvesting device.2013 International Forum on Mechanical and Material Engineering, IFMME 2013, China,Guangdong,Guangzhou, 2013-06-13 to 2013-06-14.

[19]Zhang, Zhenquan*; Liu, Haipeng; Gao, Shiqiao.The design of the closed-loop control system of micro machined gyroscope.2^nd International Conference on Instrumentation and Measurement, Computer, Communication and Control (IMCCC), 2012-12-08 To 2012-12-10.

[20]Shen, Li; Gao, Shiqiao; Guan, Yanwei.The effect of casimir force to the performance of the micro-accelerometer.14^th Annual Conference and the 3rd International Conference of the Chinese Society of Micro-Nano Technology, CSMNT 2012, China,Jiangsu,Changzhou, 2012-11-04 to 2012-11-07.

[21]He, Yunli; Liu, Haipeng; Gao, Shiqiao; Wang, Caifeng.Capillary condensation adhesion phenomena and analysis of the micromechanical gyroscope.14^th Annual Conference and the 3rd International Conference of the Chinese Society of Micro-Nano Technology, CSMNT 2012, China,Jiangsu,Changzhou, 2012-11-04 to 2012-11-07.

[22]Jiang, Anran; Gao, Shiqiao; Yao, Fenglin; He, Yunli.Structure design and simulation analysis of multiple micro piezoelectric cantilevers.14^th Annual Conference and the 3rd International Conference of the Chinese Society of Micro-Nano Technology, CSMNT 2012, China,Jiangsu,Changzhou, 2012-11-04 to 2012-11-07.

[23]Niu, Shaohua; Hong, Dandan; Gao, Shiqiao; Niu, S.*.A PID&AGC method for micro vibration gyroscope drive system.14th Annual Conference and the 3^rd International Conference of the Chinese Society of Micro-Nano Technology, CSMNT 2012, China,Jiangsu,Changzhou, 2012-11-04 to 2012-11-07.

[24]Li, Ping; Gao, Shiqiao; Jin, Lei; Liu, Haipeng; Shi, Yunbo; Li, P.*.Influence of package on micro-accelerometer sensitivity.14th Annual Conference and the 3^rd International Conference of the Chinese Society of Micro-Nano Technology, CSMNT 2012, China,Jiangsu,Changzhou, 2012-11-04 to 2012-11-07.

[25]Liu Haipeng; Zhang Zhenquan; Gao Shiqiao; Jin Lei.Analysis on the sticking failure of micro-comb driving structure.14th Annual Conference and the 3^rdInternational Conference of the Chinese Society of Micro-Nano Technology, CSMNT 2012, 2012-11-04 to 2012-11-07.

[26]刘海鹏,高世桥,金磊. 弹丸侵彻多层混凝土靶的数值模拟与实验[C].第五届全国计算爆炸力学会议论文摘要.2012:73.

[27]刘宗宝,高世桥,杜井庆. 测量数据剔除粗大误差与平滑处理的一种算法[C].第三十一届中国控制会议论文集D卷.2012:1819-1824.

[28]Liu, Zongbao; Gao, Shiqiao; Yao, Fenglin; Du, Jingqing; Liu, Z.*. Hardware-in-the-loop simulation system of penetration fuze based on labVIEW.2012 International Conference on Advances in Mechanics Engineering, ICAME 2012, 2012-08-03 to 2012-08-05.

[29]Yuan, Xiaodong*; Gao, Shiqiao. One Kind of Flight Control System Design for Separation Section in Cruise Missile.2^nd International Conference on Mechatronics and Intelligent Materials (MIM 2012), 2012-05-18 to 2012-05-19.

[30]Li, Ping*; Shi, Yun-Bo; Lu, Jun; Gao, Shi-Qiao.Study on a novel MEMS high G acceleration sensor.2^nd International Conference on Mechatronics and Intelligent Materials (MIM 2012), 2012-05-18 to 2012-05-19.

[31]Shen Li*; Gao Shiqiao; Zhang Zhenquan; Jiang Anran. Microscale Effect of Elastic Beam of The Micro-machined Gyroscope.International Conference on Frontiers of Mechanical Engineering and Materials Engineering (MEME 2012), 2012-07-27 to 2012-07-29.

[32]Shen Li*; Gao Shiqiao; Jiang Anran; Wang Caifeng. Analysis of Micro Structure's Elastic Stiffness.International Conference on Frontiers of Mechanical Engineering and Materials Engineering (MEME 2012), 2012-07-27 to 2012-07-29.

[33]Gao, Shiqiao*; Wang, Dong; Jin, Lei. Influence of the Human Body on the Characteristics of A Pedestrian Bridge.18th ISSAT International Conference on Reliability and Quality in Design, 2012-07-26 to 2012-07-28.

[34]Liu, Hai-peng*; Gao, Shi-qiao; Jin, Lei.Analysis on the Detection Capacitance of Comb Micro-Machined Gyroscope.2^nd International Conference on Frontiers of Manufacturing and Design Science (ICFMD 2011), 2011-12-11 to 2011-12-13.

[35]刘海鹏,高世桥,金磊. 弹丸侵彻混凝土靶板成坑实验及量纲分析[C].第十届全国冲击动力学学术会议论文摘要集.2011:64.

[36]Li, Minghui; Deng, Jiahao; Gao, Shiqiao; Li, M.*.Novel touch mode capacitive pressure sensor based on SiC.IEEE 2011 10^th International Conference on Electronic Measurement and Instruments, ICEMI 2011, China,Sichuan,Chengdu, 2011-08-16 to 2011-08-18.

[37]The dynamic characteristics of a couple system by pedestrian bridge and walking persons
Wang, Dong; Gao, Shiqiao; Kasperski, Michael; Liu, Haipeng; Jin, Lei; Wang, D.*
2011 International Conference on Green Building, Materials and Civil Engineering, GBMCE 2011, 2011-08-22 to 2011-08-23.

[38]Wang, Dong; Gao, Shiqiao; Kasperski, Michael; Liu, Haipeng; Jin, Lei; Wang, D.*.Simulation of the dynamic characteristics of the coupled system structure.2011 International Conference on Green Building, Materials and Civil Engineering, GBMCE 2011, 2011-08-22 to 2011-08-23.

[39]Yao, Fenglin; Gao, Shiqiao; Wang, Caifeng; Yao, F.*. Stiffness computation of a decoupled micro gyroscope and the effect of machining error.2011 2nd International Conference on Artificial Intelligence, Management Science and Electronic Commerce, AIMSEC 2011, China,Henan,Zhengzhou, 2011-08-08 to 2011-08-08

[40]Yao, Fenglin*; Gao, Shiqiao; Liang, Xinjian. Lengthwise Detection of High Linearity Micromachined Gyroscope.International Conference on Frontiers of Manufacturing Science and Measuring Technology (ICFMM2011), 2011-06-23 to 2011-06-24.

[41]Niu, Shaohua*; Gao, Shiqiao; Liu, Haipeng; Jin, Lei. An ADRC Method for Vibrating MEMS Gyrosocope Drive.International Conference on Mechatronics and Intelligent Materials, 2011-05-21 to 2011-05-22.

[42]Du, Jingqing; Gao, Shiqiao; Niu, Shaohua; Du, J.*.Design and realization of hard-target intelligent detonation fuse.2010 International Conference on Intelligent Computation Technology and Automation, ICICTA 2010, China,Hunan,Changsha, 2010-05-11 to 2010-05-12.

[43]Du, Jingqing; Gao, Shiqiao; Niu, Shaohua; Du, J.*.An algorithm for measurement data eliminating noise and smoothing.2010 3^rd International Conference on Advanced Computer Theory and Engineering, ICACTE 2010, China,Sichuan,Chengdu, 2010-08-20 to 2010-08-22.

[44]Du, Jingqing; Gao, Shiqiao; Du, J.*.Hardware-in-the-loop simulation of a projectile penetrating half-infinite concrete targets.29^th Chinese Control Conference, CCC'10, China,Beijing, 2010-07-29 to 2010-07-31.

[45]杜井庆,高世桥. 弹侵彻半无限厚混凝土靶的半实物仿真[C].第二十九届中国控制会议论文集.,2010:4321-4325.

[46]Shi, Ji-Tao*; Gao, Shi-Qiao.RESEARCH OF OVERCROSS STRUCTURE DYNAMICS MODEL AND SECURITY BY PEDESTRIAN LOAD.11^th International Symposium on Structural Engineering, 2010-12-18 to 2010-12-20

[47]Du Jingqing*; Gao Shiqiao; Yao Fenglin; Luo Chuang; Liu Haipeng.An Improved Control Method Based on PID Algorithm.2nd IEEE International Conference on Advanced Computer Control, 2010-03-27 to 2010-03-29.

[48]Liu, Hai-peng*; Gao, Shi-qiao; Niu, Shaohua; Jin, Lei.The micro mechanical environment on the comb capacitive micro-machined gyroscope.2^nd International Conference on Smart Materials and Nanotechnology in Engineering, 2009-07-08 To 2009-07-11.

[49]Liu, Haipeng; Gao, Shiqiao; Niu, Shaohua.Analysis on Stiction of Micro-comb Structure in MEMS.14^th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2009), 2009-09-20 to 2009-09-24.

[50]Liang, X. J.; Gao, S. Q..The Adhesion Failure Analysis of the MEMS Gyroscope with Comb Capacitor.8^th International Conference on Reliability, Maintainability and Safety (ICRMS 2009), 2009-07-20 to 2009-07-24.

[51]Liang, X. J.; Gao, S. Q..A MEMS Capacitive Gyroscope with Improved Reliability.13^th International Manufacturing Conference in China, 2009-09-21 to 2009-09-23.

[52]刘海鹏,高世桥,梁新建. 一种基于空穴膨胀理论的侵彻混凝土修正模型[C].第九届全国冲击动力学学术会议论文集（上册）.2009:309-310.

[53]刘海鹏,高世桥,金磊. 弹丸贯穿有限厚混凝土靶板实验与仿真分析[C].第九届全国冲击动力学学术会议论文集（上册）.2009:334-337.

[54]刘海鹏,高世桥,金磊. 弹侵彻混凝土靶面成坑分析[C].第九届全国冲击动力学学术会议论文集（上册）.2009:338-342.

[55]杜井庆,高世桥,宁展. 基于PCI6040的全自动表面张力测量仪的设计与实现[C].2008中国仪器仪表与测控技术进展大会论文集（Ⅲ）.2008:235-238.

[56]Liu, Haipeng; Gao, Shiqiao; Jin, Lei; Liang, Xinjian.A modified model for penetrating into concrete target.7^th International Conference on Shock and Impact Loans on Structures, 2007-10-17 to 2007-10-19.

[57]Gao, Shiqiao; Jin, Lei; Liu, Haipeng; Liang, Xinjian; Han, Li.An analytical penetration model based on the normal cavity-expansion theory.7^th International Conference on Shock and Impact Loans on Structures, 2007-10-17 to 2007-10-19.

[58]Gao, Shi-qiao; Jin, Lei; Liu, Hai-peng; Li, Ming-hui; Kasperski, M..Responses of a nonlinear MEMS structural system loaded by a non-stationary stochastic excitation.5^th International Conference on Nonlinear Mechanics (ICNM-V), 2007-06-11 to 2007-06-14.

[59]Liu, Hai-peng; Gao, Shi-qiao; Jin, Lei.Influences of micro forces on manufacturing and packaging of micro inertial devices.5^th International Conference on Nonlinear Mechanics (ICNM-V), 2007-06-11 to 2007-06-14.

[60]梁新建,高世桥. 解耦型微机械陀螺仪气体阻尼机理分析[C].2007'仪表，自动化及先进集成技术大会论文集（二）.2007:91-95.

[61]李明辉,高世桥. 解耦型微陀螺仪的设计、制作与性能分析[C].2007'仪表，自动化及先进集成技术大会论文集（二）.2007:60-64.

[62]杜井庆,高世桥,付德义,李明辉. 基于PID算法的控制量按线性函数变化的一种控制方法[C].2007'仪表，自动化及先进集成技术大会论文集（二）.2007:590-593.

[63]胡玉川,高世桥. 基于ARM与DSP的雷达信号处理机的设计[C].2006“数学技术应用科学”.2006:200-201-202-203-204.

荣誉奖励：

省部级三等奖5项，二等奖3项。

1. “优秀青年教师称号”。

2. 1996年获政府特殊津贴。

3.1990年获德国洪堡基金。